Bobrick B-2260 User Manual

B

A

W

W

FLOOR-STANDING

Technical Data

STAINLESS STEEL

WASTE RECEPTACLES

B-2250

Model Capacity A B W
Number

B-2250 13-gal. (49.2-L) 29-1/2" (750mm) 22" (560mm) 12-1/2" x 12-1/2" (320 x 320mm) 2250-3

B-2260 13-gal. (49.2-L) Open-Top, No Cover 22" (560mm) 12-1/2" x 12-1/2" (320 x 320mm) 2250-3

B-2280 21-gal. (79.5-L) Open-Top, No Cover 30" (760mm) 14" x 14" (355 x 355mm) 2270-3

MATERIALS:

Waste Receptacle — 22-gauge (0.8mm) stainless steel with satin finish. Equipped with vinyl bumper strip and rubber feet.
Hooks are provided to attach optional, removable liner (not provided) to upper interior corners.

Cover — 22-gauge (0.8mm) stainless steel with satin finish. Two spring-loaded, self-closing doors, which have an international
graphic symbol to identify waste disposal, are secured with full-length, stainless steel piano-hinges.

OPERATION:

Entire cover is removable for easy servicing of receptacle. Vinyl bumper strip and rubber feet on waste receptacle protect wall
and floor surfaces.

Designer’s Note: Vinyl liners for waste receptacle are available from Bobrick as an accessor y. Check the chart above for correct
liner part number to order.

SPECIFICATION:

Waste receptacle shall be 22-gauge (0.8mm) stainless steel. Exposed surfaces shall have satin finish. Waste receptacle shall be
equipped with vinyl bumper strip and rubber feet. Capacity shall be __________(inser t capacity). Manufacturer’s service and
parts manual shall be provided to the building owner/manager upon request.

Waste Receptacle shall be Model __________(insert model number) of Bobrick Washroom Equipment, Inc.
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.

Optional
Accessory

Vinyl Liner
Part No.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/07 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2007 by Bobrick Washroom Equipment, Inc.