Bobrick B-223 User Manual

STAINLESS STEEL

Technical Data

2-1/4''

55mm

4''

100mm

S

Z

(C to C Holders)

L

L

(C to C of Mounting Holes)

L

L

MOP AND BROOM

B-223

HOLDER

Finish Face of Wall

3''

75mm

S

5''

125mm

S

Y

S

Length

4-1/4''

110mm

1830mm

72''

Recommended Mounting Height Off Floor

STANDARD STOCK SIZES

Model No.

B-223 x 24 24'' (610mm) 3 8'' (205mm) 6 9-3/4'' (250mm)
B-223 x 36 36'' (915mm) 4 14'' (355mm) 6 10-1/2'' (265mm)

Length

No. of

Holders

Dim.

Y

No. of

Mtg. Holes

Dim.

Z

MATERIALS:

Mounting Base — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish.

Mop and Broom Holders — Spring-loaded rubber cam holders with anti-slip coating. Powder coated steel retainers.

OPERATION:

Surface-mounted holder is designed to keep mops and brooms away from wall. Spring-loaded rubber cam holders
accommodate handles from 7/8'' to 1-1/4'' (20 to 30mm) diameter.

INSTALLATION:

Secure unit to wall with six sheet-metal screws, furnished by manufacturer, at points indicated by an S. For plaster or dry wall
construction, provide concealed backing to comply with local building codes, then secure unit with stainless steel mounting
screws. For other wall surfaces, provide fiber plugs or expansion shields for use with stainless steel mounting screws, or pro­vide 1/8" (3mm) toggle bolts or expansion bolts.

SPECIFICATION:

Mop and broom holder shall be type-304 stainless steel with satin finish. Unit shall be __________ (insert length) long with
__________ (insert number) spring-loaded r ubber cam holders.

Stainless Steel Mop and Broom Holder shall be Model _________ (insert model number) of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.

R/A, S/B

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 2/1/11
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2011 by Bobrick Washroom Equipment, Inc.

QA020111

Printed in U.S.A.