Bobrick B-2116 User Manual
heavy-duty
Technical Data
2-3/4''
70mm
clothes hook with
concealed mounting
Finish Face of Wall
Concealed Wall Plate
S
1''
25mm
S
3/8''
10mm
3-7/16''
B-2116
85mm
S
S
Setscrews (3)
For Barrier-Free Design
38'' to 40'' 965 to 1015mm
Recommended Mounting Height Off Floor
materials:
Hook and Flange — One-piece brass casting with satin nickel-plated finish. Withstands 300-lb (136-kg) downward pull if
properly installed. Secured to concealed wall plate with three stainless steel setscrews.
Concealed Wall Plate — 12-gauge (2.7mm) case hardened steel.
installation:
Secure wall plate to wall with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. For plaster or
dry wall construction, provide concealed backing to comply with local building codes, then secure mounting plate with screws
furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws furnished, or provide toggle
bolts or expansion bolts. Secure hook to wall plate by tightening three stainless steel setscrews in flange.
specification:
Heavy-duty clothes hook with concealed mounting shall be one-piece brass casting with satin nickel-plated finish. Hook shall
be secured to a concealed wall plate with three stainless steel setscrews. Hook shall withstand 300-lb (136-kg) downward pull
when properly installed.
Heavy-Duty Robe Hook With Concealed Mounting shall be Model B-2116 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...