Bobrick B-211 User Manual

2-3/4''

70mm

Finish Face of Wall

S

S

3-7/16''

85mm

1-3/8''

35mm

Recommended Mounting Height Off Floor

Barrier-Free Design

38'' to 40'' 965 to 1015mm

HEAVY-DUTY

Technical Data

CLOTHES HOOK

with Exposed Mounting

B-211

MATERIALS:

Hook and Flange — One-piece brass casting with satin nickel-plated finish. Withstands 300-lb (136-kg) downward pull if
properly installed.

INSTALLATION:

Mount unit on wall with three sheet-metal screws, furnished by manufacturer, at points indicated by an S. For plaster or dry
wall construction, provide concealed backing to comply with local building codes, then secure hook with screws furnished. For
other wall surfaces, provide fiber plugs or expansion shields for use with screws furnished, or provide toggle bolts or expansion
bolts.

SPECIFICATION:

Heavy-duty robe hook shall be one-piece brass casting with satin nickel-plated finish. Hook shall withstand 300-lb (136-kg)
downward pull when properly installed. Manufacturer’s ser vice and parts manual shall be provided to the building owner/
manager upon request.

Heavy-Duty Robe Hook shall be Model B-211 of Bobrick Washroom Equipment, Inc., Clifton Park, New York;
Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.