Technical Data
1-3/4" Typ
45mm
S
15-3/16"
385mm
Back & Towel Tray
4-3/4"
120mm
S
Pivot
Point
11-7/16"
410mm
BOBRICK
Door
S
Finish Face of Wall
For Barrier-Free Design
Recommended Mounting Height Off Floor
66" to 70" (1675mm to 1780mm)
Recommended Mounting Height Off Floor
52" (1320mm)
2-1/8" TYP.
55mm
12-11/16"
320mm
Typ.
Patented
MatrixSeries™
SURFACE-MOUNTED
PAPER TOWEL DISPENSER
B-5262
MATERIALS:
Mounting Plate and Towel Tray — Durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Two-piece
construction. Rounded towel tray has radius opening to dispense towels without tearing. Mounting plate is equipped with a
concealed locking device to secure door; keyed like other Bobrick washroom accessories.
Door — Durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Front of door has same degree of arc
as other Bobrick MatrixSeries washroom accessories. Radius on corners, edges and top complement other MatrixSeries
accessories. Secured to towel tray with keyed posts.
OPERATION:
Unit dispenses C-fold or multifold paper towels 3-1/8" to 3-13/16" (79–97mm) deep without adjustment or use of adapters. Slot
in sides of cabinet indicate refill time. Capacity: 400 C-fold or 525 multifold paper towels. To dispense narrower towels
2-1/2" to 3-1/8" (64–79mm) deep, order Internal Towel Tray Adapter Kit, Bobrick Par t No. 5262-25. After unlocking with key
provided, door swings down for loading paper towels into unit. Retrofit Tumbler Lock Kit is available as an optional accessor y:
order Bobrick Part No. 5288-10.
INSTALLATION:
Mount unit on wall with four sheet-metal screws (not furnished) at points indicated by an S. For plaster or dr y wall
construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For
other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle
bolts or expansion bolts.
SPECIFICATION:
Surface-mounted paper towel dispenser shall be durable, high-impact grey ABS with high-gloss finish on exposed surfaces.
Front of door shall have same degree of arc as other Bobrick MatrixSeries™ accessories in the washroom. Radius on corners,
edges and top of door shall complement other Bobrick MatrixSeries™ washroom accessories. Door shall be secured to
towel tray with keyed posts and to mounting plate with a concealed locking device keyed like other Bobrick washroom
accessories. Unit shall be capable of dispensing 400 C-fold or 525 multifold paper towels without adjustment or use of adapters.
Manufacturer’s service and parts manual shall be provided to the building owner/manager upon request.
Surface-Mounted Paper Towel Dispenser shall be Model B-5262 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...