
Technical Data
LinerMate™
ACCESSORY
3944-134
Patent Pending
22-3/16"
565mm
14-13/16"
375mm
5-1/8"
130mm
Holder Sleeve
Support Strap
7-1/16"
180mm
3"
75mm
MATERIALS:
LinerMate™ Accessory — Molded plastic sleeve and U-shaped, 18-8 S, type-304, 20-gauge (.91mm) stainless steel support
strap hemmed for safety; riveted construction. Rests inside of waste receptacle area, removable for servicing. Fits Bobrick and
most other manufacturers' comparable 12-gal. capacity receptacles.
Applications Model Numbers Part No.
Bobrick ClassicSeries™
Gamco TW and WR Series
Other Manufacturers
Bobrick ConturaSeries
(For retrofit into units
manufactured prior to Jan.
2010)
®
B-3644, B-3942, B-3944, B-3949, B-3961, B-39619, B-3974, B-3979 3944-134
TW-1, TW-1-6, TW-1C, TW-1F, TW-1FS,
TW-1M, TW-1MC, TW-14RP, TW-14RPT, WR-6, WR-14
LinerMate fits most other manufacturers' similar 12-gal waste receptacles
with the following minimum dimensions:
22-3/8" H x 14-13/16" W x 6-7/8" D (570 x 375 x 175mm)
B-277 3944-134
B-43644 43644-134
B-4369, B-43699 4369-134
B-43944, B-43949 43944-134
3944-134
3944-134
OPERATION:
To insert disposable can liner, lift LinerMate up and forward from waste receptacle and rest over front edge with the bottom
notches of LinerMate sleeve engaged on top front edge of receptacle. Place disposable liner inside LinerMate and fold trash
liner over LinerMate sleeve. Tie a knot in the corner of the can liner, then place LinerMate with disposable liner back into
receptacle. To empty, gather disposable liner from LinerMate sleeve and lift bag up.
INSTALLATION:
If hooks exist in waste receptacle, carefully bend them in or push in to clear obstruction for LinerMate. Insert LinerMate inside
12-gal. waste receptacle.
SPECIFICATION:
LinerMate accessory for ClassicSeries 12-gal. waste receptacle shall have a molded plastic sleeve with a 20-gauge (.91mm)
stainless steel, U-shaped support strap, hemmed for safety; riveted constr uction. LinerMate facilitates installation and removal
of disposable liners without unsightly liner overhang. LinerMate shall rest inside of waste receptacle. LinerMate fits most other
manufacturers' similar 12-gal. waste receptacles with the following minimum dimensions: 22-3/8" H x 14-13/16" W x 6-7/8" D
(570 x 375 x 175mm).
LinerMate™ Trash Liner Holder shall be Model 3944-134 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Issued 3/25/10 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.