Bobrick 39003-130 User Manual
OPTIONAL TowelMate™
ACCESSORY FOR 8" DEEP
TrimLineSeries™
Technical Data
For Retrofit into:
TrimLineSeries™ B-39003 B-390034 B-396034 for 8" Deep Paper Towel Dispensers/Waste Receptacls
SM
TowelMate reduces paper towel waste by 20% – 40% and complies with the US EPA Reduce & Reuse Resource Conservation
BOBRICK GREEN
Initiative.
Patent Pending
MATERIALS:
TowelMate Module – 18-8 S, Type 304, 24 gauge (0.6mm) stainless steel with 2B finish.
PAPER TOWEL DISPENSERS
10-9/16"
270mm
Tape
Support Rod
16-13/16"
425mm
14-1/4"
360mm
2-1/2"
65mm
39003-130
7-13/16"
200mm
3-5/8"
90mm
2-1/4"
60mm
Towel Adapter
10mm
Rod Screw
1-1/2"
40mm
3/8"
1/2"
15mm
9/16"
15mm
1-1/16"
25mm
TowelMate Support Rod – Black, 3/8" (10mm) diameter Nylon 6/6 Rod fastened to Module with two stainless steel sheet
metal screws.
OPERATION:
Optional TowelMate Accessory fits into Bobrick Model Number(s) B-39003, B-390034, or B-396034 TrimLineSeries Paper
Towel Dispensers. TowelMate Accessory Module has towel guide angle with 90 degree return to prevent paper towels from
falling forward out when door is opened for servicing. TowelMate Accessory Support Rod allows dispenser to dispense paper
towels one at a time without tabbing, tearing, bulging, sagging or bunching. To load paper towels in towel tray, place stacks of
folded paper towels inside module with bottom paper towel leaf facing forward. Feed first sheet from bottom of the towel tray
opening over the rod and through the opening to conceal rod and start dispense.
INSTALLATION:
Open door of towel cabinet and remove all existing paper towels from dispenser. Remove existing plastic towel adapter secured
inside dispenser cabinet to clear unit of any obstructions. Remove protective film from double back tape on the back of TowelMate Accessory and place Module inside towel dispenser. Engage tabs located at bottom of TowelMate into Towel Tray slots
positioning TowelMate Support Rod evenly over the towel tray opening with bottom of module resting down on inside of towel
tray and firmly press TowelMate Module into dispenser cabinet back. Load stacks of paper towel into cabinet, start dispense,
close cabinet door.
SPECIFICATION:
TowelMate Accessory module shall be type-304 stainless steel with 2B finish. Black nylon suppor t rod, 3/8" (10mm) diameter,
fastened to module with stainless steel sheet metal screws. TowelMate Accessory fits into Bobrick Model Number(s) B-39003,
B-390034, or 396034 TrimLineSeries Paper Towel Dispensers. Paper Towel Dispenser fitted with TowelMate Accessory shall
dispense 800 multifold paper towels. TowelMate Accessory Module has a 90 degree return towel guide angle to prevent paper
towels from falling forward out when door is opened for servicing, and a TowelMate Nylon Support Rod fitted across the
center of the towel tray opening to dispense paper towels one at a time without tabbing, tearing, bulging, sagging or bunching
(falling through the opening). TowelMate reduces paper towel waste by 20% – 40% and complies with US EPA Reduce & Reuse
Resource Conservation Initiative.
Optional TowelMate™ Accessory for 8" Deep TrimLineSeries™ Paper Towel Dispensers shall be Model 39003130 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, Califor nia;
Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd.,
Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. 39003-211 Rev. 7/22/10 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.
Loading...