OPTIONAL
TowelMate™
Technical Data
For Retrofit into:
ConturaSeries
ClassicSeries
TrimLineSeries™ B-35903 B-36903
TowelMate reduces paper towel waste by 20% – 40% and complies with the US EPA Reduce & Reuse Resource Conservation
BOBRICK GREEN
Initiative.
®
B-4262 B-4369 B-43699 B-43944 B-43949 manufactured proir to June 2010
®
B-359 B-369 B-3699
SM
Patent Pending
ACCESSORY
10-9/16"
270mm
6-1/8"
155mm
2-1/2"
65mm
Towel Adapter
Tape
Support Rod
369-130
3-5/8"
90mm
2-1/4"
60mm
9"
230mm
Rod Screw
1-11/16"
40mm
MATERIALS:
TowelMate Module – 18-8 S, Type 304, 24-gauge (0.6mm) stainless steel with 2B finish.
TowelMate Support Rod – Black, 3/8" (10mm) diameter Nylon 6/6 Rod fastened to Module with two stainless steel sheet
metal screws.
OPERATION:
Optional TowelMate Accessory fits into Bobrick Model Number(s) B-359, B-369, B-3699 ClassicSeries and B-35903 or B-36903
TrimLineSeries Paper Towel Dispensers. TowelMate Accessory Module has towel guide angle with 90 degree return to
prevent paper towels from falling forward out when door is opened for servicing. TowelMate Accessory Support Rod allows
dispenser to dispense paper towels one at a time without tabbing, tearing, bulging, sagging and bunching. To load paper towels
in towel tray, place stacks of folded paper towels inside module with bottom paper towel leaf facing forward. Feed first sheet
from bottom of the towel tray opening over the rod and through the opening to conceal rod and start dispense.
INSTALLATION:
Open door of towel cabinet and remove all existing paper towels from dispenser. Remove protective film from double back tape
on the back of TowelMate Accessory and place Module inside towel dispenser. Position TowelMate Support Rod evenly over
the towel tray opening with bottom of module resting down on inside of towel tray and firmly press TowelMate Module into
dispenser cabinet back. Load stacks of paper towel into cabinet, start dispense, close cabinet door. For B-4262, remove existing
internal adapter prior to installing TowelMate accessory.
SPECIFICATION:
TowelMate Accessory module shall be type-304 stainless steel with 2B finish. Black nylon suppor t rod, 3/8" (10mm) diameter,
fastened to module with stainless steel sheet metal screws. TowelMate Accessory fits into Bobrick Model Number(s) B-359,
B-369, B-3699 ClassicSeries and B-35903 and B-36903 TrimLineSeries Paper Towel Dispensers. Also retrofitable into B-4262,
B-4369, B-43699, B-43944, B-43949 ConturaSeries models manufactured prior to June 2010. Paper Towel Dispenser fitted with
TowelMate Accessory shall dispense 400 to 475 multifold paper towels depending on model number. TowelMate Accessory
Module has a 90 degree return towel guide angle to prevent paper towels from falling forward out when door is opened for
servicing, and a TowelMate Nylon Support Rod fitted across the center of the towel tray opening to dispense paper towels one
at a time without tabbing, tearing, bulging, sagging or bunching (falling through the opening). TowelMate reduces paper towel
waste by 20% – 40% and complies with US EPA Reduce & Reuse Resource Conservation Initiative.
Optional TowelMate™ Accessory shall be Model 369-130 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. 369-201 Rev. 7/22/10 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.
Loading...