SURFACE-MOUNTED
NAPKIN/TAMPON VENDOR
Finish Face of Wall
6-1/2''
165mm
25-7/8''
655mm
11-7/8''
300mm
Lock & Key
B-282 25
3-1/2''
90mm
S
14''
355mm
1880 to 1980mm
1535mm
60-1/2''
For Barrier-Free Design
Recommended Mounting Height Off FLoor
2-1/2''
65mm
S
4-1/2''
115mm
Coin Slots
Handle
Lock
1-13/16''
45mm
S
3/4''
19mm
S
74'' to 78''
Recommended Mounting Height Off FLoor
MATERIALS:
Cabinet 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Door 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless
steel piano-hinge. Equipped with two tumbler locks keyed like other Bobrick washroom accessories. Door has no brand-name
advertising for products dispensed. International graphic symbols identify products dispensed and coin denomination.
Coin Mechanisms (2) Single-coin mechanisms for 25¢ operation. Each coin box is equipped with a tumbler lock and
opens with different key than furnished for door. Coin mechanisms do not require lubrication. All moving parts are replaceable without removing cabinet from wall.
OPERATION:
After coin is inserted in dispensing mechanism of patrons choice, turning appropriate handle dispenses boxed napkin or
tampon tube. Coin slot of each dispensing mechanism is identified by an international graphic symbol. Capacity: 30 napkins
and 27 tampons. Coin slots are blocked when supply is depleted. Vendor dispenses napkin packages measuring 3'' x 1'' x
4-1/4'' (75 x 25 x 110mm) and tampon packages measuring 5-1/8'' long x 11/16'' diameter (130 x 17mm).
INSTALLATION:
Mount unit on wall with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished) at points indicated by an S. For
plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheetmetal screws (not furnished). For other wall construction, provide fiber plugs or expansion shields for use with sheet-metal
screws, or provide 1/8" (3mm) toggle bolts or expansion bolts. If unit projects above top of wainscot, provide aluminum
channel or other filler to eliminate gap between unit and finish face of wall.
SPECIFICATION:
Surface-mounted napkin/tampon vendor shall combine two dispensing mechanisms in one cabinet to provide sanitary
napkins or tampons at users option. Unit shall be type-304 stainless steel with all-welded construction; exposed surfaces shall
have satin finish. Door shall be 18 gauge (1.2mm), secured to cabinet with a full-length stainless steel piano-hinge, and
equipped with two tumbler locks keyed like other Bobrick washroom accessories. Each coin box shall be equipped with a
tumbler lock that is keyed differently than door locks. Vendor shall be equipped with 25¢ coin mechanisms and shall carry no
brand-name advertising. Manufacturer's service and parts manual shall be provided to the building owner/manager upon
completion of project.
Surface-Mounted Napkin/Tampon Vendor shall be Model B-282 25 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment of Canada
Ltd., Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 10/98 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 1998 by Bobrick Washroom Equipment, Inc.
Loading...