
Technical Data
For Installation of Grab Bar Through Toilet Partition Panel.
GRAB BAR ANCHORS
FOR TOILET PARTITIONS
One Anchor Required for Each Flange.
X
1-5/8''
40mm
1-1/8''
30mm
258
SERIES
3-1/4''
80mm
2-1/4''
55mm
For B-530, B-490 and B-6106 Series Grab Bars
Anchor No. Partition Thickness X
2583 3/4" to 1"
19 to 25mm
2586 1/2"
13mm
MATERIALS:
Backplate — 18-8 S, type-304, 16-gauge (1.6mm) stainless steel with satin-finish.
Screws — For 2586 Anchor - (2) Part No. 2584-6 Screw (1/4 - 20 x 1/2" Phillips Round Stainless Steel Machine Screw)
For 2583 Anchor - (2) Part No. 2582-3 Screw (1/4 - 20 x 3/4" Phillips Pan Head Stainless Steel Machine Screw)
Nuts — For 2586 Anchor - (2) Part No. 2584-104 Nut (Chrome Plated Brass, Sphere Head 1/2" Nut)
For 2586 Anchor - (2) Part No. 258-104 Nut (Chrome Plated Brass, Sphere Head 3/4" Nut)
INSTALLATION:
Using grab bar as a template, mark toilet partition panel. Drill 7/16" (11mm) holes for connectors. Inser t connectors through
backplate and into holes in panel. Secure grab bar to connectors using screws furnished by manufacturer.
SPECIFICATION:
Grab bar anchors shall have type-304, 16-gauge (1.6mm), satin-finish stainless steel backplate. Threaded chrome-plated brass
connectors shall be keyed to backplates to prevent rotation. Stainless steel machine screws shall be furnished by manufacturer.
Grab Bar Anchors shall be Anchor No. __________ (insert anchor number) of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 1/6/11 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2011 by Bobrick Washroom Equipment, Inc.
QA010711