BMW Parts and Accessories
Installation Instructions
ON
ONTP CD Rad Nav
InfnfoOK
InfoOK
BMW Traffic
BMW 5 Series Saloon (E 39) with a production date after 09/00
BMW 5 Series touring (E
Pro installation kit
39/2) with a production date after 09/00
TP
BMW
BMW
CDCDRadadNav
039 0004 B
These installation instructions are not valid for cars with SA358 (climate comfort windscreen).
These installation instructions are onlyvalid for :
•cars without an on-board monitor, without SA663 (BMW Professional radio) with a
production date after 09/00
•cars without an on-board monitor, with SA663 (BMW Professional radio) with a production
date after 02/01
Technical and electrical knowledge required
The installation time is approx. 1.5 hours but this may vary depending on the condition of the
car and the equipment in it.
1.Important information for the installation of the navigation radio
Only for use in the BMW dealer organisation.
The navigation radio may only be installed by a specialist workshop that has the required special
tools and manuals.
Ensure that the cables/lines are not kinked or damaged as you install them in the car.
Additional cables/lines that you install must be secured with cable ties.
All the figures show LHD cars, proceed in exactly the same way on RHD cars.
Item numbers refer only to the overview drawings and to the texts next to the appropriate figure.
The operating manual supplied with the kit is to be given to the vehicle keeper.
Subject to technical modifications
Required tools and equipment
MoDIC III or DISCombination pliers
Set of straight slot screwdriversAngle cutter
Cable lampCable lamp
Conduct a brief test
Disconnect the battery12 00 ...
Remove the instrument cluster62 21 000
Remove the radio65 11 030
Remove the glove compartment51 16 360
Remove the front right door sill trim51 47 000
Remove the A pillar trim at the bottom right
Remove the centre air jet