Thank you for using our Mobile Phone,moel: QB150. To guarantee the
best performance of your phone, please read this manual carefully.
We reserve the right to make modification on print errors or update
specifications without prior notice.
l
Contents
Safety Instructions ………………………………………………… 3
Phone controls ……………………………………………………… 4
Preparation before use ……………………………..…………… 5
Installing the SIM card ……………………………………………………… 5
Installing the Memory card ……………………………………….……… 6
Installing the battery ………………………………………………………… 6
Charging the battery …………………………………………………………. 6
Power On/Off ……………………………………………………………………… 7
Security number ………………………………………………………………… 7
General features ……………………………………………………. 8
Make a call by dialing ………………………………………………………… 8
Answer a call ……………………………………………………………………… 8
To end a call conversation ………………………………………………… 9
Emergency calls ………………………………………………………………… 9
To make an international call ……………………………………………. 9
Call Voicemail ……………………………………………………………………. 9
Adjusting the volume ………………………………………………………… 9
Keypad lock ……………………………………………………………………….. 10
Standby mode …………………………………………………………………….10
Phone Menu ………………………………………………………….. 10
Phonebook ……………………………………………………………. 12
FCC Part 15 Compliance ………………………………….……... 29
Specific Absorption Rate (SAR) information ……………… 30
User Manual QS-150
2
Safety Instructions
These instructions are intended for the safe and effective use of
your phone. Please follow these guidelines. Failure to do so might
cause the product to malfunction, or even a potential hazard to
your health.
Do not use your mobile phone while driving. Park the car
before making or answering a call.
Turn off your phone when refueling.
Do not use your phone near a gas station, flammable, or
chemical substances.
Warning! It may explode when exposed in fire.
Do not use your phone during a flight. Wireless devices
can cause interference in the aircraft.
Do not use your phone near medical equipments like
pacemaker without requesting permission from the
physician or medical staff.
Radio signals may affect the performance of your phone.
Do not touch any exposed parts of the antenna while in a
call, it will affect the call reception and waste battery
power.
Do not attempt to disassemble or modify the phone by
yourself. Only authorized personnel should perform this
service.
When you connect accessories to your phone, please read
the safety guidelines carefully. Do not use unauthorized products.
Please use only the original accessories or products that
are authorized by our company.
Keep out of children's reach.
User Manual QS-150
3
Phone controls
Speaker
Navigation
keys
MP3 key
Left soft
key
Talk key
Write
message
key
Use the control buttons to do the following:
Navigations keys (Up/Down/Left/Right)
• Press to move the selection/control up, down, left,
or right during options programming.
• Use to move the cursor around the lcd screen.
MP3 key
• Press to directly access the MP3 player home
screen.
Left Soft key
• Press to operate the function that is displayed on
the bottom left side of the lcd screen.
User Manual QS-150
4
Center key
FM radio
key
Right soft
key
Power/End
key
Camera key
Qwerty keys
Talk key
• Press to make or to receive a call.
• Press in standby mode to open the call lists.
Write message key
• Press to directly access the Write message home.
Center key
• Press in standby mode to access the phone home
menu.
• Press to confirm a function during options
programming.
FM Radio key
• Press to directly access the FM Radio home menu.
Right Soft key
• Press to operate the function that is displayed on
the bottom right side of the lcd screen.
Power/End key
• Press to end an active call.
• Press to exit and return to standby mode.
• Power On/Off: Press and hold for 3 seconds to turn
the phone On or Off.
Camera key
• Press to directly open the camera function in shoot
mode.
User Manual QS-150
5
Preparation before use
Installing the SIM card
Your phone will not work without the SIM
card. The Subscriber Identity Module (SIM)
card identifies you to the wireless network.
1 Remove the back cover by pulling the
tab upward.
2 Insert the SIM card into the slot, with
copper contacts facing down the pins
as shown.
Installing the Memory card
Your phone has a slot for a micro SD flash memory card.
Insert or remove the SD card:
• To insert an SD card, push the card
into the slot, copper contacts facing
down. Push the card gently in until
it locks into place.
• To remove an already-installed SD
card, pull out the card gently with
y our fingertip.
Installing the battery
1 Insert the battery and make sure that the terminals on the
battery aligns with the metal contacts on the phone.
2 Replace the back cover and push until the locking tabs clicks
into place.
User Manual QS-150
6
Charging the battery
1 Connect the AC adapter plug to an electrical outlet and
connect the other end to the USB port at the lower side
of the phone.
2 When the power comes on, “Charging…” will be displayed on
the LCD screen, and the charge indicator will start to scroll.
It will only stop after the battery comes to full charge. If a
battery is completely discharged, it may take a few minutes
before the charge indicator appears on the LCD screen.
3 To fully charge when the phone is discharged, keep charging
for at least three hours.
4 After the battery charge comes to full, disconnect the charger
from phone and the socket of the alternati ng current.
Warning!
Do not take out the battery when it is being charged.
To ensure the best performance, please use original
accessories. Using other accessories may affect the
performance of your mobile phone.
Personal data and settings in your phone and SIM card
might lost when you take out the battery.
Power ON/OFF
Press and hold Power key to turn on or power off your phone.
Security number
PIN1 PIN (Personal Identity Number), is usually provided to a SIM
card by the network operator. If you enter a wrong PIN three
times in a row, it will be locked. You need to enter your
PUK (Personal Unblocking Key) number to unlock. Please
contact your network operator for more details.
PIN2 PIN2 is provided to some SIM. If you enter a wrong PIN three
times in a row, it will be locked. You need to enter your PUK2
to unlock. Call your network operator for more details.
PUK PUK (Personal Unblocking Key) is used to unblock the PIN.
PUK is provided to a SIM card. If you lose or forget the
password, contact your network operator.
User Manual QS-150
7
Phone code
You can turn on the Phone code for your personal security
and protects your phone against unauthorized use.
Phone features
Make a call by dialing
You have several choices for placing a call.
Dial the In standby mode, enter a phone number,
number press Delete key to clear a wrong entry.
Press Talk key to dial out the number.
Dial from Find the number you want to call in your
contactsphone book and then press Talk key to
dial out the selected contact.
Dial fromPress Talk key in standby mode. The call
the call list lists will display starting from the most
recently called number. Press Talk key to automatically dial the
displayed record, or press Up or Down key to scroll the list. Press Talk key to dial
the selected record.
Answer a call
When a call comes in, phone will ring and/or vibrate according to
your phone profile setting. It will show the caller's name if the
network supports it. The caller’s name display depends on
whether you have saved it in your phonebook. Press Talk key, or
press Option>Accept to answer.
In call options:
Mute Press Mute/Unmute key to activate or
deactivate the microphone.
Turn on the Press Option>Handsfree to turn on the Speakerphone speakerphone . Press Option>Handsfree off to return to normal talk mode.
Hold a call Press Option>Hold to hold the call.
User Manual QS-150
8
Options when receiving an incoming call:
Turn off the Press Ringer off to turn off the ringer.
Ringer Reject a call Press End key or press Reject to reject
the call.
To end a call conversation
When you have finished talking, press End key to end a call. You
can also press End
dialed.
Emergency calls
You do not need to own a SIM card to make emergency calls.
Emergency calls may differ from different network operators,
please contact your network operator to get your local emergency
call number.
To make an international call
To make an international call, press U/+ key to input “+” on the
screen. Enter the country code, area code (without the first zero),
and the phone number:
For example; Enter 505 for Nicaragua, 44 for UK, 86 for China.
Enter +8613798297223, when making an international call to
China.
Call Voicemail
Before using this feature, first setup the Voice mailbox number
in Menu>Phonebook>Extra number>Voice mail
1 Select Listen to Voice Mail messages in the Menu>
Phonebook>Extra number>Voice mail
2 Your voicemail number is dialed.
3 When the call connects, follow the voice prompt to retrieve
your voice mail message.
key if you want to terminate a call after you
User Manual QS-150
9
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.