b mobile K340 User Manual
K340 User Guide
Dear customer,
Thank you for choosing this mobile phone. This mobile phone incorporates the
latest world advanced functions, enabling simple and convenient operation,
satisfying your special requirements.
The mobile phone supports T-FLASH (memory) card and Dual SIM standby. It
integrates the following available functions: SMS, MP3, MP4, Camera, FM radio,
Alarm, sound recorder and Calendar, enabling you arranging your work, study and
life freely; with long standby duration, as well as calculator, your communication will
be easier and smoother; powerful File manager allows you managing the files
conveniently. In addition, the chord ringtone allows you selecting music to set as
ringtone; the personalized appearance also can satisfy your selection.
Note: User’s Manual is just to guide the user about the functionality of the
phone. Some functions may vary due to modifications and upgrades of
software or due to print mistake.
1. SAFETY TIPS
Use of wireless hands-free system (headphone, headset) with a low power
Bluetooth emitter.
Keep your calls short or send a text message (SMS) (instead. This advice
applies especially to children, adolescents and pregnant women.
Use cell phone when the signal quality is good.
People having active medical implants should preferably keep the cell phone at
least 15 cm away from the implant.
- 1 -
Phonebook
Contacts saved in the mobile phone contain the following information: the
telephone name and number. You can add new contacts to phone or SIM1/SIM2.
You can perform the following operations in this mode:
2. Menu guide
View: View detailed information of the contact.
Send text message: Send a message from SIM1/SIM2.
Call: Make a call from SIM1/SIM2.
Edit: Edit name and number of the contact.
Delete: Delete the contact.
Copy: Copy the contact to phone or SIM1/SIM2.
Move: Move the contact to phone or SIM1/SIM2.
Add to blacklist: Add the contact to block list.
Add to SMS blacklist: Add the contact to SMS block list.
Mark several: Mark several or mark all to send messages or delete.
Groups: Add new group or edit existed groups.
Phonebook settings: You can perform the following operations in this mode.
Preferred storage: Add a new contact to the SIM1/SIM2, Phone or All.
- 2 -
Speed dial: Set on/off, you can edit and alter speed dial list.
My number: To set owner number.
Extra numbers: To set owner numbers and Fixed dial of SIM1/SIM2.
Memory status: To check phonebook memory status of SIM1/SIM2 and
phone.
Copy contacts: To copy contacts from SIM1/SIM2 and phone to other paths
respectively.
Move contacts: To copy contacts from SIM1/SIM2 and phone to other
paths respectively.
Delete all contacts: Delete all contacts from SIM1/SIM2 and phone.
Enter the Contacts interface to perform the following operations:
Quick search:
In the input area where the cursor locates, enter the first letter to locate the first
qualified entry in the contacts list. For example, to search for “Lisa”, enter letter “L”.
Search name:
Enter the desired name, and search the matched entry in the Contacts.
- 3 -
Messages
Enter this menu, you can view: Write message, Inbox, Drafts, Outbox, Sent
messages, Broadcast messages and SMS settings.
Write message
You can enter this function menu to write short messages.
Short message is a network service. To send or receive short messages, you
Each message may contain 160 characters. While editing the message,
Press # key to switch the input method.
Press the right soft key to delete one character before the cursor, or hold right
may need to subscribe for this service from your network operator. The short
messages are sent to the message center and then to the recipients (GSM
subscribers). The short messages are saved in the network if the mobile
phone of recipient isn’t switched on or can’t receive short messages (memory
is full). The validity depends on user’s settings and network operator. With
SMS, you can send and receive chain text messages, which may affect the
charge of messaging. Please contact your network operator for details.
select the “Input method” option.
soft key long to clear all characters; press the End key to return to standby
- 4 -
mode; When writing messages, you can insert number and name in editing
message.
When the editing message is finished, you can press direction up/down key to
option: enter recipient or select contacts from phonebook or call history to
send.
This mobile phone supports group messages with more than 600 characters
each (the characters limit of common text message). If the message contains
more than limited characters, the phone sends it in two or more messages.
If the memory is full, an icon will flash in the top line of the screen; since the
mobile phone supports dual SIM cards, the messages are saved in SIM1 and
SIM2 separately, and the prompts appear separately. To receive new
messages normally, delete the short messages in corresponding SIM cards. If
the recipient has received the message, the mobile phone sends an alert tone
of message report (report is enabled)
Note: When you send message via SMS service, the mobile phone may display
“Sent”. It indicates that the message has been sent to the SMS center. But it
doesn’t mean that the recipient has received the message. Contact your network
operator for more information.
Inbox
- 5 -
You can read the received short messages in the Inbox, including SIM1 messages
and SIM2 messages. Press left soft key of options in messages list interface, you
can perform the following operations:
View: View the info of the message.
Reply: Reply in text message by SIM1 or SIM2.
Call sender: Call the sender by SIM1 or SIM2.
Forward: Forward the message to another contact by SIM1 or SIM2.
Delete: Delete the message.
Delete same number: Delete same number the massage.
Delete all: Delete all the messages in the Inbox of corresponding SIM cards; if
SIM1 is selected.
Save to Phonebook: You can save this sender to SIM1,SIM2 or Phone.
Drafts
Save the edited text message and perform operations respectively. You can
perform the following operations to the short messages saved in Drafts: View, send,
Edit, Delete, Delete same number and Delete all.
Outbox
Turn on “Save sent message” in SMS settings, messages will be saved in Sent
messages; if the message isn’t sent successfully, the message will be saved in the
- 6 -
Outbox. You can perform the following operations to the short messages saved in
Outbox: View, Resend, Edit, Delete, Delete same number and Delete all.
Sent messages
Turn on “Save sent message” in SMS settings, messages will be saved in Sent
messages; you can perform the following operations to the short messages saved
in sent messages: View, Forward, Delete, Delete same number and Delete all.
Broadcast messages
This function refers to the network operators to send public information. Using
broadcast short message service; you can receive from network operators place on
various topics of information. This function converse SIM1 and SIM2 broadcast
messages, and you can operation:
Receive mode: Enable/disable message receiving.
Channels: Select, add, edit or delete the channel.
SMS templates
There are 10 templates for text messages.
SMS blacklist
Blacklist on/off: Set On/Off for blacklisted and add blacklist numbers.
- 7 -
SMS settings
You can set the SIM1/SIM2 SMS parameters in this menu.
SMSC address: Check and edit SMS center address.
Validity period: Set validity period as
1hour/6hours/12hours/1day/3days/1week/Maximum.
Message type: Set message type as Text/Fax group3/Fax group4/Page/Email.
Delivery report: The network notifies whether the recipient has received the
message or not.
Reply path: Transfer the replay path to the network and this function requires
the support of SMS center.
Voicemail server: Add and call the voice mail number saved in the list.
Memory status: You can check the memory status of SIM1/SIM2 and phone
Save sent message: Turn on/off save sent message.
Preferred storage: Set preferred storage as Phone/SIM.
Call center
Note: The number of SMS center is provided by the network operator.
in this menu.
- 8 -
Call history
This mobile phone can register the missed calls, received calls and dialed calls of
SIM1 and SIM2, as well as the time and expense of all calls. Enter this menu; you
can view call history and call settings.
Missed calls
This menu displays the recent received calls that you did not answer. In the missed
calls list, you can view detailed information like the date and time of the calls, call,
send text message, save the numbers to Phonebook of SIM1/SIM2 or phone, edit
before call and delete.
Note: When the mobile phone prompts missed call, you can press “View” to access
the list of missed calls. Select the desired number and press the call key or left soft
key to call this number by SIM1/SIM2.
Dialed calls
This menu displays the recent calls you have dialed. In the dialed calls list, you can
view detailed information like the date and time of the calls, call, send text message,
save the numbers to Phonebook of SIM1/SIM2 or phone, edit before call and
delete.
Received calls
This menu displays the calls you have received. In the dialed calls list, you can
view detailed information like the date and time of the calls, call, send text message,
- 9 -
save the numbers to Phonebook of SIM1/SIM2 or phone, edit before call and
Name
Description
Divert all
Divert all incoming calls
delete.
Delete call logs
You can delete Dialed calls, Missed calls, Received calls and All calls in this menu.
The phone will pop up “delete all” for confirmation.
Call timer
You can check call timer of all call logs.
Call settings
SIM1/SIM2 call settings
Call waiting: Set to activate or deactivate the call waiting and you can check
the status by pressing query status. For call holding and multi-party
conference, you need to activate this function first. It requires network
support.
Call divert: This function is a network service and you need to subscribe from
the network operator first. This function can divert the qualified calls to
specified telephone number.
- 10 -
Loading...