Page 1
Protected by
HUMIDITRAK™ USER GUIDE
SET UP AND USE
1. Download and launch the D’Addario Humiditrak app.
2. IMPORTANT!! – Before removing the ribbon from the battery case of your
new Humiditrak sensor, move to a location at least 30 feet away from any
other active Humiditrak sensors to ensure the best pairing experience!
3. Remove the ribbon from the battery housing and place the Humiditrak
sensor within six inches of your smart phone or tablet.
4. Follow the on screen instructions to begin pairing the sensor.
5. See http://www.blustream.com/humitrak-setup for detailed instructions,
video guide, and troubleshooting tips.
SAFETY AND HANDLING.
WARNING. Please read all safety and operating instructions before operating
this device.
BATTERY. Always use the recommended type of battery. Keep batteries away
from children. Keep batteries away from heat. Replace depleted batteries
before reaching 5% remaining power. If Humiditrak device is to be unused for
several months, remove battery.
SERVICE AND REPAIR. Your Humiditrak device should be returned to the
manufacturer in the event any of the following events occur which seem to
inhibit the device’s function or causes the device to deliver inaccurate, erratic,
or intermittent data. (1) The internal electronics are damaged; (2) the device
has been submerged or subjected to any introduction of liquids or other
significant moisture; (3) the device has obvious signs of damage from impact;
(4) any indication that the information relayed to the smart phone app
deviates significantly from the observed environmental conditions.
FCC AND IC STATEMENTS OF COMPLIANCE
FCC COMPLIANCE. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
WARNING. Changes or modifications not expressly approved by D’Addario
and Blustream could void the user’s authority to operate the equipment.
INTERFERENCE. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or
relocate the receiving antenna; (2) Increase the separation between the
equipment and receiver; (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected; (4) Consult the dealer
or an experienced radio/TV technician for help.
IC WARNING. This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
EXPOSURE TO RADIO ENERGY. This portable transmitter with its antenna
complies with FCC and Industry Canada RF exposure limits for general
population / uncontrolled exposure.
WARRANTY INFORMATION
ONE YEAR LIMITED WARRANTY. D’Addario and Company, Inc. (“D’Addario”)
warrants to the original purchaser (“Purchaser”) of this D’Addario product, for
the period of one (1) year following the date on which Purchaser purchases
the product, that the product shall be free of defects in design, assembly,
material, or workmanship. D’Addario will repair or replace, at its option, any
defective product free of charge. In order to qualify for this warranty, the
Purchaser must provide the defective product and a copy of the original
receipt of purchase, to D’Addario for inspection. The receipt of purchase must
indicate the product purchased, price paid, date of purchase, and name of
merchant. To request service under this warranty, contact D’Addario at 1-800XXX-XXX or at [email protected]. This warranty shall be null and void if
D’Addario determines that the product has been improperly installed, altered,
mishandled, submerged in liquid, or tampered with any way. This warranty
does not protect against normal use, wear and tear, or damage due to abuse.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF D’ADDARIO. THERE ARE
NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE
LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. IN NO EVENT SHALL
D’ADDARIO BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT OR
CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS
OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY D’ADDARIO PRODUCT,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some jurisdictions do not allow exclusions or limitations on implied warranties
or incidental, consequential or other damages, so the above exclusions and
limitations may not apply to you.
TRADEMARK AND COPYRIGHT
COPYRIGHT NOTICE. Copyright 2015 D’Addario and Company, Inc. No part of
this manual may be reproduced or modified without written consent from
D’Addario. D’Addario and Blustream Corporation are not liable or responsible
for any operational or technical errors or omissions made in this manual.
TRADEMARKS. Humiditrak is a trademark of D’Addario. Blustream and
Blustream Technology are registered trademarks of Blustream Corporation.
Loading...