Bluetooth Headset User Manual
(V2.0+EDR Version)
Bluetooth
Model No.:BT-ET007
Contents
1、Introduction.....................................................................................
Bluetooth Headset Technology.............................................................
2、Charging and Basic Operation..........................................................
Headset Structure Sketch....................................................................
Chargers and Batteries.......................................................................
Charging and the Using Time of Headset...............................................
Turning on & off the Headset................................................................
Pairing the Headset with a Compatible Device.......................................
Disconnecting the Headset.................................................................
Reconnecting the Headset..................................................................
3、Basic Use.........................................................................................
Wearing the Headset..........................................................................
Adjusting the Headset Ear hook...........................................................
Adjusting the Headset Volume.............................................................
Call handling......................................................................................
Using the Headset with Several Phones................................................
Resetting the Headset.........................................................................
Troubleshooting.................................................................................
4、Battery Information..........................................................................
5、Terms Interpretation.........................................................................
6、Appendix..........................................................................................
Headset Standard Accessories...........................................................
Specification.....................................................................................
Indicator LED Status..........................................................................
Operation Statement..........................................................................
1
1
2
2
3
3
5
5
6
6
7
7
8
8
8
10
10
10
11
12
13
13
14
15
16
1.Introduction
Bluetooth Headset BT-ET007 can be used with any phones that support
Bluetooth wireless technology. This allows you the freedom to make and receive
calls while on any time and any where.
Read this user manual carefully before using the headset. Read also the user
manual for your phone, which provides important safety and maintenance
information. Keep the headset away from children.
For the user manual, all rights reserved to manufacturer.
Bluetooth headset technology
Bluetooth wireless technology allows you to connect compatible communication
devices without cables. Bluetooth connection does not require that the phone
and the headset be in line of sight, but both devices should be within 10 meters
(30 feet) of each other. Connections may be subject to interference from
obstructions, such as walls, or other electronic devices. The headset is
compliant with the Bluetooth Specification 2.0 + EDR version supporting the
following profiles: Headset Profile V1.2 and Hands-free Profile V1.0.Check with
the manufacturers of other devices to determine their compatibility with this
device.
There may be restrictions on using Bluetooth technology in some location.
Check with your local authorities or service provider.
*Bluetooth is a registered trademark of Bluetooth SIG,Inc.
1
2.Charging and Basic Operation
Headset Structure Sketch
The headset contains the following parts.
2
1
2
3
4
5
6
7
8 9
10
1-- Multifunction Button(MFB)
2-- LED Indicator
3-- Microphone
4--Volume down key（VL-）
5-- Volume up key (VL+)
6--Ear Hook
7--Speaker
8--Charger socket
9--Rotation axes
10- Lanyard Hole
Before you can start to use the headset, you must charge the battery, and pair
the headset with a compatible phone.
【Note】 ：Parts of the headset are magnetic. Metallic materials may be
attracted to the headset. Do not place credit cards or other magnetic storage
media near the headset, because information stored on them may be erased.
Chargers and Batteries
Check the model number of any charger before using it with this device.
【Warning】：Use only batteries and chargers approved by the manufacturer
for use with this particular enhancement. The use of any other types may
invalidate any approval or warranty, any may be dangerous.
For availability of approval enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord.
Charging and the Using Time of Headset
The headset has an internal, non-removable, rechargeable battery. Do not
attempt to remove the battery from the device, as you may damage the device.
Connect the charger cable to the headset, as below picture.
3
Connect the charger to a wall outlet or the car charger (options) to the accessory
power outlet of your car. The red indicator light turns on during charging.(If you
do not use the headset for long periods, causing the battery out of power
completely,the red LED will not light, it’s normal).The red LED will turn off
automatically or appear to flash after being fully charged. The charging time as
below:
【Note】 ：To make sure the batteries to be fully charged drastically, please
continue to charge about one and half an hour after the red indicator light turned
off.So It takes about four and half an hour for fully charging when the battery is
running out off power completely.
Disconnect the charger from the wall outlet or the accessory power outlet and the
headset after charging. When you disconnect the power cord of the charger,
grasp and pull the plug, not the cord.
The longest continued standby time after the headset is fully charged:
The longest continued talking time after the headset is fully charged:
Time from charging to LED turn off
The longest standby time
280 hours
About 2 hours and 45 minutes
Model
Model
BT-ET007
BT-ET007
BT-ET007
The longest talking time
11 hours
Model
4
However, the talking and standby times may vary when used with different mobile
phones, products that use a Bluetooth connection, usage settings, usage styles,
and environments. When the battery is running out of power, the headset beeps,
and the red indicator light flashes every 2 seconds .Then please charge the
battery asap.
【Note】 ：If charging the headset when it is on, the headset will automatically
turn off when start charging. The headset can be turned on for using while in
charging status.
Turning on & off the headset
1. To turn on the headset, please press the Multifunction Button (MFB) about 2
seconds, until the headset beeps and the blue LED starts to flash for continued 4
times and red LED flashes 2 times(some headsets’red LED will not flash,it is also
normal).
2. The blue LED will flash every 2 or 5 seconds after turning on(before paired).
3. To turn off, please press the Multifunction Button ( MFB) about 5 seconds, until
the headset beeps, and the red LED flashes for continued 4 times.
Pairing the Headset with a Compatible Device
1. Turning on your phone and the headset.
2. Activate the Bluetooth function on the phone. (See the user guide of your
phone for instructions).
3. Press and hold the VL+ key for 2 seconds until the blue and red indicator
lights flashes in turn. When you release the VL+key, the headset is ready to be
paired (Note: If the headset paired already, you should cut the current
connection, then it can pair again)
5
4. Set the phone to search for Bluetooth devices. (See the user guide of your
phone for instructions).
5. Select the headset BT-ET007 from the phone list of found devices.
6. Enter the pass key 0000 to pair and connect the headset to your phone. For
some phones you may need to make the connection separately after pairing (See
the user guide of your phone for details). You only need to pair the headset with
your phone for one time.
When the headset is connected to the phone and ready for use, the headset
beeps, and the blue indicator light flashes every 10 seconds(some flash every 5
seconds). The headset model appears in the phone menu where you can view
the current paired Bluetooth devices.
【Note】If the headset can not connect any compliant mobiles or other devices
successfully within 20 minutes after it turns on, the headset will turn off
automatically.
Disconnecting the Headset
To disconnect the paired headset from your phone (for example, to connect the
phone or headset to another Bluetooth device), turn off the headset, or
disconnect the headset from the Bluetooth menu of your phone. You do not need
to delete the paired headset from the phone in order to disconnect it.
Reconnecting the Headset
To reconnect the paired headset to your phone:
6
3.Basic Use
Wearing the Headset
The headset is ready to wear on the right ear ( Pic. 1). If you want to use it on the
left ear, please softly lift up the earhook ( Pic 2 ) and rotate it ( Pic. 3), and push it
back to the suitable place , then wear to your ear( Pic. 4).
The status of paired headset and
phone
Reconnecting methods
Turn on the headset,it will connect
with phone automatically
Connect from phone’s Bluetooth
menu
Turn on the phone,press the headset
MFB button, it will connect
automatically or connect from
phone's Bluetooth menu.
The paired phone turns on,
headset turns off
The paired headset turns on,
phone turns off
If cutting the connection from phone's
Bluetooth menu, but headset is still on
Both paired headset and phone are on,
but out of connection
1 2 3
4
7
Adjusting the Headset Ear hook
The ear hook can be adjusted to suit the different ear size and make you feel
comfortable.
Warning: Make sure not to distort the ear hook always for a long time with large
extent while adjusting the hook, otherwise may damage the ear hook.
Adjusting the Headset Volume
Press the VL+key to increase or the VL-key to decrease the volume.
【Note】 ：There are 15 volume levels available for adjusting to high or low,
moreover high volume and low volume can be identified by different tone.
Whenever it reaches the maxi / mini volume, you will hear two beeps.
Call Handling
To Make a Call
To make a call, dial the number with your phone, and press the answer key on
your phone.
If your phone supports redialing function, please press the VL+ key of the
8
headset for 3 seconds, until it beeps then release the VL+key.
If your phone supports voice dialing function, press the VL-key of the headset
until it beeps , then please release the VL-key. And operate as described in the
user guide of your phone.
To Answer a Call
To answer a call, press the headset MFB or the answer key on your phone. If the
automatic answer function is set on in your phone, the phone automatically
answers the incoming call after one ring.
If you do not want to answer a call, press the headset MFB for 3 seconds until it
beeps.
To End a Call
To end the current active call, press the headset MFB or press the ending key on
your phone.
To Mute or Cancel Mute of Microphone
To mute the microphone during a call, press the headset MFB and VL+key
simultaneously until it beeps. Repeating this operation can cancel the mute
function.
Transferring a Call
To transfer the call from the headset to a compatible phone, press the headset
MFB and VL- key for 3 seconds simultaneously until it beeps. Or use the related
function in your phone.
9
Using the Headset with Several Phones
You can pair the headset with 8 phones, but connect only one phone at a time. If
the headset is switched on within 10 meters (30 feet) among several paired
phones, the headset tries to connect the last used phone. If the headset can not
connect the last used phone, you should set connection from the last used
phone or other phones' Bluetooth menu. If the headset still could not connect any
phones within 20 minutes, it will turn off automatically.
Resetting the Headset
Under following status you have to reset the headset:
Headset still does not work afer being fully charged.
Headset software needs reset.
Plug the charger to the headset and charge it for seconds to restart (Normally
such situation seldom happens).
Troubleshooting
If you can't connect the headset to your phone, do as following:
Ensure the headset is charged, turned on and paired and connect to your
phone.
Ensure the Bluetooth function is active on your phone.
Check the headset is within 10 meters (30 feet) from your phone and there are no
obstructions between the headset and the phone, such as walls or other
electronic devices.
10
If you don't use headset for long time, or maintain the battery well, thus will make
the battery invalid. If so, please contact supplier.
【Note】 ：If headset disconnects with phone due to the weak signal
(Distance between headset and phone is out of 10 meters), the paired headset
will connect with the phone automatically within 20 minutes in the available
distance.
4.Battery Information
This headset is powered by rechargeable battery. The new battery can achieve
the best function only after two or three times fully charged and discharged
cycles. But it eventually will be invalid after being charged and discharged for
hundreds of times.You only can charge the battery with our designated headset
charger.
Unplug the charger from the electrical plug and the device when you don’t use it.
Do not leave a fully charged battery to a charger, since overcharging may shorten
its lifetime. If left unused, a fully charged battery will loose its power over time.
【Note】 ：Please charge the battery every three months if you don't use the
headset for a long time.
Use the battery only for its intended purpose. Never use any damaged charger or
battery!
11
Leaving the device in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Please
always try to keep the battery between 15 ºC and 25 ºC (59 ºF and 77 ºF). A
Device with a hot or cold battery may not work temporarily, even when the battery
is fully charged.The battery performance will be particularly limited when the
temperature is below freezing. Do not dispose the batteries into a fire as they
may explode. Batteries may also explode if damaged. Dispose the battery
according to the local regulations. Please recycle the battery when possible. Do
not dispose the battery as the household waste.
5.Terms Interpretation
Pairing: Verify between the two devices (Bluetooth headset and mobile phone)
Connect: The two devices build up connection for communication after been
approved by each other.
【Note】 ：Normally, only need to make paring between the two devices once,
but connection will not only once (Unless only one device connect with the
headset, then it can connect to that device automatically); Unsuccessful pairing
not stand for available communication, only successful connection can make
communication. BT-ET007 stands for the name of the headset mentioned in this
manual ,the name will be showed on the discovered devices list of the mobile
phone when making pairing.
12
6. Appendix
Appendix 1: Headset Standard Accessories
Model No
Standard
Bluetooth
Headset
1 set
1 pc
1 pc
Ear Hook
Charger
BT-ET007
Image
Qty
Accessories
13
Appendix 2: Specification
Model No BT-ET007
Solution
CSR
(L)59mm,(W)24mm,(H)11mm
2 hours and 45 minutes
Up to 11hours
280 hours
13g
Dimension
Weight
Charging Time
Talking Time
Standby Time
BlueCore4-Audio ROM
V2.0 + EDR
2.4GHz~2.4835GHz ISM Band
45mW
0dBm
2Mbps ~ 3Mbps
0000
Up to 10 Meters(30 feet)
5mA~20mA
3.6V rechargeable Li-polymer battery
DC 5.0V~6.5V
-10℃~+45℃
Main Chip
Bluetooth Version
Frequency
Input Power
RF Output Power
Data Transfer Rate
Headset Passkey
Operation Range
Supply Current
Battery
Voltage
Operating Temperature
14
Appendix 3: Indicator LED status
15
LED
Blue
Red
Red
and
Blue
Status
Flashing continued 4 times and red LED
flashing 2 times(The red LED is not flashing
for some headsets,it’s normal)
Turning on mode
Standby mode before pairing
Standby after successful pairing
Data transferring mode or
on a call
Turning off mode
Charging Status
Indicating low battery
Pairing mode (last for about 5
minutes)
Finishing charging or charging
the headset which ran out of the
battery power or headset turned
off
Flashing 1 time for every 2 seconds
(or for every 5 seconds for some headsets)
Flashing 1 time for every 10 seconds
(or for every 5 seconds for some headsets)
Flashing continued 2 times for
every 8 seconds
Flashing continued 4 times
rapidly
Keeping on Lighting
Flashing(not in charging
status)
Flashing in turn rapidly
All indicator LED off
Note
Appendix 4: Operation Statement
Part 1
16
Operation
Turning on
Turning off
Pairing
Answering a call
Long press the MFB key
for 2 seconds
Long press the MFB key
for 5 seconds
With the headset on,
hold the volume VL+key
for 2 seconds
Press the MFB key
Red and blue LED
flash in turn
The blue LED flashes 4 times
and red LED flashes 2
times.(The red LED does not
flash for some headsets,it is
normal)and hear a beep
Red indicator flashes 4
times and hear a beep
Methods
Status
Communication available
after hearing a beep and
both red and blue LED flash 1
time each(some headsets
don’t flash,it is normal)
【Note】 ：Under some status of headsets,when you press the MFB/VL+/VLkey,the red LED and blue LED will flash 1 time(Some headsets will not flash,it is
normal).They are normal flashing since you have pressed the key.
Part 2
17
Methods Status
Decreasing the volume
Press VL-key
Ending a call
Press MFB key
Hearing a beep and both
red and blue LED flash 1
time each(some headsets
don’t flash,it is normal)
Redialing
Press VL+key for
3 seconds
Automatically redial
the last number you
called after hearing a beep
Operation
Hearing a beep and both
red and blue LED flash 1
time each(some headsets
don’t flash,it is normal)
Total 15 volume levels
available
Transferring a call from
mobile to headset or
headset to mobile
Press both the MFB key
and volume VL-key
simultaneously for 3
seconds
Hearing a beep
Increasing the volume
Press VL+key
Hearing a beep and both
red and blue LED flash 1
time each(some
headsets don’t flash,it is
normal) Total 15 volume
levels available
Loading...