Bluetrek MUSICALL User Manual

Stereo Bluetooth® headset

Music & Call Wirelessly

Thank you for purchasing a Bluetrek Bluetooth® headset.

Before using this product, please charge your headset for

1.5 hours and read the safety and quick start guide carefully.

GET ASSISTANCE

Consumer Care and Technical Support

US & Canada : [e-mail]

Toll free number for US only : 1-888-927-BLUE

WELCOME

(Operation hours : Central Time Zone 8:00am- 5.30pm)

Others : [e-mail]

About MusiCALL

Microphone

3.5mm audio jack /
Charging socket

LED Status indicator

Previous track

3.5mm

audio jack

Clip

Volume up

TALK button
Next track

Volume down

Noise isolating
stereo earphones
(exchangeable)

BLUETREK MUSICALL I 1

English

English

CHARGING

When you hear a low-tone beep in your headset at regular intervals, and the indicator light
flashes in red, your headset needs to be recharged.

1

Charging Socket
The indicator light turns red when the battery is charging. When fully charged, the

2

indicator light will turn off.

1

2

2 I BLUETREK MUSICALL

SWITCHING ON/OFF

ON

Press and hold the TALK button ( ) for about 3 seconds until the blue indicator light is on.
(A beep can be heard from the speaker)

OFF

Press and hold the TALK button ( ) for about 6 seconds until the red indicator light is on.
(A beep can be heard from the speaker)

BLUETREK MUSICALL I 3

English

English

PAIRING

1

Place the BLUETREK MusiCALL and your mobile phone within 0.3 meter (1 foot) from each other.

2

Switch on your phone and select its Bluetooth® discover mode (refer to your phone’s manual)

3

When the BLUETREK MusiCALL switch off, press and hold the TALK Button for approx. 8

seconds until blue and red light flashes alternately.

4

Once the mobile phone detects the headset, a “BLUETREK MusiCALL” message will be displayed.

5

Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000,
then press “yes” or “ok”.
*If your phone supports Secure Simple Pairing (SSP), you will not need to enter a PIN code.

6

For some phones, you may need to select “Connect”.
* If pairing was successful, the indicator light will switch to blue and flashes slowly.

2 4

3

BLUETREK MusiCALL

BLUETREK MusiCALL

5

BLUETREK MusiCALL

“0000”

4 I BLUETREK MUSICALL

6

BLUETREK X3 DSP

BLUETREK MusiCALL

onnec

Connect

onnec

Assign short name
Set as unauthorised
Delete

Cancel

CancelSelect

NOTE:

-If you haven’t paired with any device within 5 minutes, the headset will go to the idle
mode. You must then switch off your headset and star t the pairing again.

-When headset is disconnected under out of range situation (distance up to 10 meter),
the headset will keep searching and re-connect automatically within 10 minutes. After 10
minutes, the headset will be off automatically.

Re-connecting With a Bluetooth Device Manually

Connecting to mobile phone (support Hands-Free Profile, Headset Profile, A2DP and
AVRCP profile)

When the headset is in idle mode, simply press once on the TALK button ( ), it will
connect to the last paired device automatically.

Connecting to music player, for example Bluetooth enabled MP3 device (support
A2DP and AVRCP profile)

When the headset is in idle mode, simply press once the Previous Track button ( ), it will
connect to the last paired device automatically.

BLUETREK MUSICALL I 5

English

English

WEARING

Designed as a clothing clip. Just clip it on your shirt, jacket or whatever fit your needs.
Always be sure to place the headset so that the microphone is positioned as close to your
mouth as possible. This will ensure that your voice comes through loud and clear.

EXCHANGEABLE EARPHONE / HEADPHONE

At any time, you can use the provided noise isolating headphone or exchange to your
favorite earphone or headphone.
Usage of other than specified earphones or headphones, may exposure to excessive sound
pressures, it can cause hearing damage or even hearing loss. Always turn the volume low
before exchange to new headphone.

compatible with any 3.5mm jack
earphone / headphone

MAKING CALLS

Dial the number on the phone keypad or use voice recognition if your phone is equipped
with this function.

6 I BLUETREK MUSICALL

Voice Dial From BLUETREK MusiCALL

Make sure the voice recognition function on your mobile is activated and your voice tags
have been recorded with the phone (please refer to your phone’s manual). Then press
once on the TALK button ( ) and Previous track button ( ) together to call out the voice
recognition application on your phone.
*This function may not be available on some phones.

HEADSET CONTROL

Function Operation

Power On Press the TALK Button ( ) for 3 seconds

Power Off Press the TALK Button ( ) for 6 seconds

Answer Press once the TALK Button( )

End Call Press once the TALK Button ( )

Reject Call Press the TALK Button( ) for 3 seconds

Redial Press once the TALK Button( ) and Next Track Button ( ) together

Call Transfer Press the TALK Button( ) for 3 seconds

Volume Adjust

Mute/Unmute the

microphone

Press once the VOL + button for volume up and VOL – button for
volume down

Press once the VOL + and VOL - button together

BLUETREK MUSICALL I 7

English

English

LISTENING MUSIC

To listening music, your phone required to have A2DP profile.

If your mobile phone / music device supports the Audio/Video Remote Control Profile
(AVRCP), you can use the MuisCALL headset to control music. This feature may vary
depending upon your mobile phone.

Function Operation

Play/Pause Press once the TALK button( )

Stop Music Quick press 2 time the TALK button( )

Volume up/down Press once the VOL+ / VOL- button

To skip to another

music track

Fast forward/Rewind Press and hold the Next track ( ) or Previous track ( ) button

Press once the Next track( ) or Previous track ( ) button

RESET

If the headset fail to communicate or any abnormal behavior, you may need to reset your headset.
When the headset is switched off, press the TALK button ( ) together with VOL + button for
about 8 seconds until the red and blue light flashes alternately.
*Reset the headset will delete all pairing connection, you will need to pair the devices again.

8 I BLUETREK MUSICALL

MORE INFORMATION & SUPPORT

This manual is just to get you started.If you are having trouble, visit www.bluetrek.com for more
information. Please contact us at [e-mail] and we will help you through any
difficulty you may have.

Some features may vary depending upon your mobile phone. You can check the compatibility
on our website. You can also check with your phone manufacturer that your handset supports
either handsfree or headset Bluetooth profiles.

Thank you for choosing a BLUETREK® product

BLUETREK MUSICALL I 9

English

award winnin g wirel ess inn ovation

www.bluetrek.com