U s e r M a n u a l | S o u n d T R A X
™
8 0 0 . 9 3 5 . 1 1 6 5
www.bluetigerusa.com
Thank you for purchasing the SoundTRAX ™ by Blue Tiger.
Please read through this user manual before using your
headset to ensure your best experience .
Product Features
The SoundTRAX ™ by Blue Tiger has been designed to
provide you with a high quality music and calling
experience. Comfortable and fashionable, the
SoundTRAX™ will be your companion at home, the gym,
or anywhere you are when you want your music with you.
The SoundTRAX ™ is equipped with multiple connection
options including Bluetooth, microSD, and wired
connection. The SoundTRAX™ can last for up to 30 hours
of conitinuous use (up to 400 hours on standby) on a
single charge.
Getting Familiar with your SoundTRAX™
Bluetooth® Pa ir in g Ins tructions
1. Make certain your SoundTRAX™ is in the “Off” position.
2. Move the switch to Bluetooth and then hold down the multi-
function wheel for about 8-10 seconds to initiate pairing
mode. Upon activating pairing mode, the LED light will flash
to blue for a few seconds and then begin flashing blue/red.
3. Follow the operating instructions for your phone to allow
your device to search for a new Bluetooth connection.
4. Select the headset from your Bluetooth device list on your
phone and when asked, select “Yes” to confirm the
connection.
5. If a PIN, Passkey, or Passcode is required, enter “0000.”
If at any time you experience difficulty pairing your headset with
your device, Blue Tiger recommends that you turn off the
SoundTRAX™ and your phone and if possible, remove the
battery from your phone or device. Wait a few seconds and
then turn both devices back on and attempt pairing again from
step one.
Basic Operation in Bluetooth® Mode
All functions are based on the multi-function wheel
Call Control
Pairing Mode: Press and hold for 5-6 seconds
Voice-Dial: Press and hold for about 2 seconds and wait for
phone to respond
Redial: Press 2 times rapidly
Answer/End Call: Press once
Refuse call: Press and hold for 2-3 seconds
Music Playback Control
Volume+: Press and hold “vol+” for two seconds during a
conversation or during music playback to increase volume
Volume-: Press and hold “vol-” for two seconds during a
conversation or during music playback to decrease volume
Rewind to previous track: Press and release “vol-“ when playing
music
Skip to next track: Press and release “vol+” when playing music
Play/Pause: Press and release the multi-function wheel
Using the SoundTRAX™ In Wired/SD Mode
Your SoundTRAX™ headset also has the option to bypass
Bluetooth entirely and be used as a wired headset or to play
music directly from a microSD card. To do so, simply switch the
headset to the “mp3 “ position and plug the included stereo
headset cable into the headset and the music playback device or
place a microSD card with Mp3 files saved directly to the root
directory into the TF/SD card slot. Please note that while in
wired mode, the headset will no longer have the ability to
control playback functions from a tethered device. These
functions will need to be performed by the playback device
when the headset is in wired mode.
Understanding the LED Indicator
Red Solid: While charging, indicates that charging is taking place
Blue Intermittent: Flashes 3 times to indicate power on, then 2
times every two seconds indicating operation
Red/Blue Alternating: Indicates pairing mode
Blue Light Flashes 3 Times Rapidly: Indicates a.) Voice dial
activated, b.) Redial activated, c.) Volume adjusted, d.) Call
answered, e.) Call refused, f.) Call ended.
Battery Care and Best Practices
Please allow your headset to charge for a minimum of 2 hours
and a maximum of 4 hours. Leaving the headset on to charge
longer than the recommended time could have a negative
impact on the lifetime of the battery. If the headset is idle for
more than 20 minutes, it will automatically turn off in order to
conserve battery. If a phone call comes in and you wish to
connect through the headset, simply turn the headset back on
immediately when the phone rings, wait for the Bluetooth
connection to reestablish, and press the multi-function wheel
once to connect the call.
Do not expose your headset to extreme temperatures, drop the
headset, or expose your headset to moisture as doing so could
damage the headset.
Warranty
Your headset is covered by a 1 year manufacturer warranty
through Blue Tiger. This is a limited warranty covering electronic
parts failure due to manufacturer defects and does not include
failure due to normal wear or if the product has been used in any
way not advised by Blue Tiger as disclosed in this user manual.
Details can be found at www.bluetigerusa.com or by calling Blue
Tiger Support at 1-800-935-1165.
Loading...