Bluetake Technology BT430Tx, i-PHONO Plus BT430Tx Quick Start Manual

BLUETOOTH STEREO DONGLE–QUICK SETUP GUIDE

English

Bluetooth® Stereo Dongle

BT430Tx Quick Setup Guide

Index

English…………………………………………………...2

Francais ………………………………………..…..………4
Deutsch …………………………….……………..………6

Italiano ………………………….....….….……8

Espanol………………. .…………….………..……………........10

Pyccкий …………………………………………………...12

日本語 ……………………………………………………...14

繁體中文 ………………. .…………………………………...16

Trademarks

"Bluetake" name and logo are trademarks of Bluetak e Technology Co., Ltd. “Bluetooth” word mark and logos are
owned by the Bluetooth SIG, Inc. and any use of such marks by Bluetake Technology Co., Ltd. is under license.

Copyrights

© Copyright 2005 Bluetake Technology Co., Ltd.
All Rights Reserved.

Page

English

[Turn On / Off ]

[ Charging ]

Power Switch

Turn on / Active - Blinking Blue

Pairing mode Press and Hold for 3 sec. Red/Blue alternately

Low Battery - Blinding Red every 3 sec

BLUETOOTH STEREO DONGLE–QUICK SETUP GUIDE

< If this is the first time you use the i-PHO NO
PLUS Bluetooth Stereo Dongle (P/N: BT430Tx),
please refer to the next lesson to

3.5mm (1/8 in.)

Stereo Plug

Pairing Button

Status Indictor

Charge Socket

Function Pairing Button Status Indicator

Charging - Constant Red

Note: When the stereo dongle fully charged, the status indictor will switch off all light.

the device in advance. >

Turn On / Off:

Sliding the power switch to turn on / off the
i-PHONO PLUS Stereo Dongle.

Step-1: Please make sure the computer is on with
power supply in advance, and then plug the USB Power
Cable included in the BT430Tx retail package into the
USB socket of the laptop or desktop.

Step-2: Plug the pipe-shaped terminal of the USB
Power Cable into charge socket of the stereo dongle
directly.

FULLY

charge