Bluetake Technology BT450RX0508A User Manual

Bluetooth

®

Stereo Headphone

P/N: BT450Rx

User Manual

BLUETAKE

BLUETOOTH STEREO HEADPHONE KIT – USER MANUAL

English

Retail Box Contains

Please make sure you have received the following items:

n Bluetooth Stereo Headphone (BT450Rx)
o AC Power Adapter (Output: DC 5V / 500 mA)
p Y-splitter Power Cable
q Nonwoven Fabrics Pouch
r User Manual

BLUETOOTH STEREO HEADPHONE KIT – USER MANUAL

English

Bluetooth Stereo Headphone:

(A) Left Side Speaker (B) Right Side Speaker
(C) Ear Clip (D) Power/Call Button
(E) Foam Ear Pad (F) Status LED Indicator
(G) Charge Socket (H) Remote Control Roller
(I)

Microphone

BLUETOOTH STEREO HEADPHONE KIT – USER MANUAL

English

Status LED Indicator Chart

Bluetooth Stereo Headphone

Status LED Pattern Beep

Power on Blue 1 beep

Connected Blue 1 beep

Pairing Mode Red + Blue (alternate) 2 beeps

Incoming

Phone Call

Battery Low Red 2 beeps every

Red + Blue (alternate) 2 beeps every

2 seconds

60 seconds

BLUETOOTH STEREO HEADPHONE KIT – USER MANUAL

English

User Control Interface Chart (Headphone)

Power/Call Button

Action Function

Press & Hold 2 sec Power On

Press Once Answer/Make/End a Call, Voice Dial

Press & Hold 3 sec Power Off

Remote Control Roller

Action Function

Roll Up Volume Up

Roll Down Volume Down

Roll Up & Hold 2 sec Next Music Track

Roll Down & Hold 2 sec Previous Music Track

Press Once Play/Pause Music
Press & Hold 2 sec

Press & Hold 2 sec, together
with Power/Call Button

Reject a Call

Pairing Mode

BLUETOOTH STEREO HEADPHONE KIT – USER MANUAL

English

Power/Call Button

Remote Control Roller

BLUETOOTH STEREO HEADPHONE KIT – USER MANUAL

English

Power On/Off i-PHONO mini

< If this is the first time you use the i-PHONO mini headphone and stereo

transmitter, please refer to the next lesson to FULLY charge both the

devices in advance. >

Power On: Press the Power/Call Button and hold 3 seconds

and the Status LED Indicator will begin to flash blue light.

Power Off: Press the Power/Call Button and hold 2 seconds.

Status LED Indicator

Power/Call Button

Press and Hold 2 sec.

BLUETOOTH STEREO HEADPHONE KIT – USER MANUAL

English

Charging i-PHONO mini

Before you start to charge the i-PHONO mini headphone and

stereo transmitter, please POWER OFF the both two devices..

Step-1: Plug the AC power adapter in to the interior outlet.

Step-2: Connect the AC power adapter with the Y-splitter

power cable.

Step-4: Open the soft rubber cover which is attached to the
headphone’s left side speaker. Then, Plug the flat-squared
terminal of the Y-splitter Power Cable into the chare socket of
the headphone.

Please refer to the following chart to know the charging status:

Charging LED Indicator (Y-splitter Power Cable) for Headphone

Red Charging Mode

Green Fully Charged