Bluetake Technology BT400 GII Quick Start-up
BT400GII
Bluetooth Headset
Quick Start-Up
www.bluetake.com
2
- Overview of BT400GII -
DC POWER IN
Earhook
Speaker
Microphone
Open / Close the microphone
The microphone can be
closed when the headset
doesn’t use.
“Volume Up” button
“Volume Down” button
“Power/Talk/Pairing”
button
3
1.
2.
3.
- Changing the earhook -
The BT400GII Bluetooth headset
can be worn on either ear. Please
carry out the following steps to
shift the earhook for wearing it on
the other ear.
1. Carefully remove the earhook
from the headset
2. Change the direction of the
earhook as shown in diagram
2.
3. Carefully replace the earhook
on the headset.
4
- Turning the headset ON/OFF -
To turn your headset ON:
Press and hold the button for 3 seconds, and then the
speaker will emit two high tones. When the power is on, the
LED in the
button starts to flash blue.
(Note: The headset will go to pairing mode if you press and
hold the
button for 5 seconds from OFF status)
To turn your headset OFF:
Press and hold the button for 3 seconds, and then the
speaker will emit two high tones. When the power is off, the
LED in the button stops flashing.
Loading...