Bluestem NQFEB User Manual

DiDa pro 尺寸：110*80mm/128铜版纸/16P骑马钉/正反/彩色印刷 货前打样确认！

User’s Guide

NQFEB

User’s Guide EN

1. Introduction

Thank you for purchasing the NQFEB - WiFi speaker, the entirely new
concept. It is totally different with Bluetooth speaker and traditional speaker:
One or more pieces speaker can be connected with your smart device via
router to play same music or different music at the same time.

Specification

NQFEB

Output Power:
Frequency range:
Power supply:
Function Spec:
Supported Device:

Support Mode:

Rechargeable battery with charging option from USB cable

15W
80Hz-20KHz
Lithium battery or USB cable
WiFi, Bluetooth, Line-in
iPhone, iPad, iPod touch, Android Smartphone and Tablet,
Window PC etc.
Network Connection, Direct Connection,
Bluetooth Connection, Cable connection

- 1 - - 2 - - 3 - - 4 - - 5 -

2. Function Profile

Previous Previous(Long Press)

Volume Down

Play/Pause

Voice Control ModeMute

Next(Long Press)
Volume UP

ON/OFFLED Micro USB

Aux-in/Line-in

3. GETTING STARTED

Download the MUZO app in the App Store or Google Play store, then install
the app on your device.

CONNECTING TO WIFI

1. Ensure your device is connected to a wireless network,then open the
MUZO app.On the home screen, press”Wi-Fi Setup Wizard” button.You will
be prompted to choose your network. Choose”YOUR WIRELESS_2.4G”.­from the network list.
Please note:only 2.4GHz networks are supported.

2.Power on your NQFEB speaker by pressing and holding the power
Button for 3 seconds.The mode indicator Will flash white when ready to pair
to your network。

3. Long Press the W/M button about 2S
into network connection。

4. Then check your APP, find this page on your APP. Then “Add your device”.
When goes into next page, choose ”Add other MUZO compatible speakers”

5. Then goes into below page, click “BUSH”; then goes into SETUP page,
to click “Settings” to set your WIFI. It will jump to your WIFI setting, then
you just choose the “NQFEB_” to connect the speaker WIFI.

NQFEB

Open

6. Then open you APP, you will
find below page, choose your own
WIFI and connect. Then Click
“Continue”, then connected.

8.Add your local music service provider
to enjoy more music. Click the
"Add More Services" button.

7.To add more speakers, press+ on the
top right and repeat steps 2-6.

NQFEB

9.Increase the source service providers,
need to open the source service
providers behind the button.

LOGGING INTO YOUR AMAZON ACCOUNT

Once connected to your network, press the Login button to log in to your
Amazon account, or skip this step. Note:You cannot utilize Alexa Voice
Service if you are not logged in to an Amazon account.

Sign in to your Amazon account. If you do not already have an Amazon
account, choose "Create a new Amazon account." It may take a few
seconds for your account to load.Once logged in, the app will confirm your
login successful. Note:You will be prompted to agree to Amazon's terms
when logging in.

- 7 -- 6 - - 8 - - 9 -

NQFEB Setting WiFi Password

NQFEB

①

②

③

After connected with wifi, getting into the wifi connected page of

①

MUZO App.

②

Then click the "setting" button, select "speaker info" to get in the

next page.

③

Select the "personal hotspot", then click the" Wi-Fi password", and

you can set your own NQFEB Wi-Fi password.
Note: The NQFEB Wi-Fi password only can be set or changed under

the opening of the "personal hotspot".

To activate Alexa, tap the microphone button on the top of your
speaker or say ”alexa” to awake speaker. You will hear a short tone.
Next, ask Alexa a question, such as, " what is the weather today in
New York?" Or you can tell Alexa to do something like, "Alexa, add
milk to my Shopping list".

Note: After Network Connection, the password of speaker is always the
password of the last router you connect, which will be used when Direct
Connection.
If you forget the password of speaker, just use the router you have to
Network Connection, then password will be this router's.

Resetting your DiDa speaker

To reset the NQFEB, insert a toothpick, straightened paper or insulation
object clip into the AUX IN jack untill all touch button lights flash. You
are successful complete resetting after all light off.

4. Mode Switch

When turn on speaker, it will be WiFi Mode automatically
Long time press "W/M" turn to Bluetooth mode
Long time press "W/M" again, it will turn back to WiFi mode

5. Bluetooth Connection

Long Press mode switch key“W/M”to change the mode from WiFi to Bluetooth
. Then will see blue light“W/M” flash . The speaker is in Bluetooth mode and
waiting for connection.
Navigate the Bluetooth function of your device (Select “Set Up” Bluetooth or
turn “ON” Bluetooth)
Select “Search” or “Discover” devices
Select Bluetooth “NQFEB”
After completing the steps above, your device will remind you “connected”. In
case of unsuccessful pairing, turn off the speaker and restart it.

- 10 - - 11 -

Direct Connection

(This is used when there is no network, such as outdoor activity）

1. Turn on the speaker. The mode indicator will flash white .

2. Enter WLAN setting of your device and turn on WLAN

3. Search the WiFi name of speaker “NQFEB_”, connect.

4. Enter APP, play music or add more speakers
Remarks: The first speaker you connected just like the router, if you turn off
the speaker, other speakers will be disconnected. If you turn off other
speakers, the rest ones remain work.

The possible reasons of failure of adding devices:

1.The most possible reason is that your smartphone connect with the WiFi
router which is 5G, then device can't receive the request of connection sent
from smartphone.

2.If you have a dualband router (5G + 2.4G), please set the 2.4G
password same as the 5G, then maybe connectable, maybe not, depends
on the routers.

3.If the router set Enterprise WPA will fail to connect, as we don’t support
Enterprise WPA.

4.Below setting on router will also result in failing to add device:
a)If the IP address is assigned statically
b)If there is MAC address limitation, only specific MAC address could
connect
c)The router is hidden.

5.Some routers has maximum connection, when exceed the maximum, will
fail to add device.

6.Network is too bad, may be successful after trying many times.

6.Cable connection（Line-in)

Use provided audio cable as below to connect with speaker:

3.5mm stereo jack

The 3.5mm audio cable of NQFEB can be ef
hint tone.This 3.5mm audio cable does not work under the off state.

fective under the boot state,and which will have

7. Charging and LED Indicator Light

Built-in lithium battery
picture:

can be charged by Micro USB cable, see below

Charging by USB

ebook

Not

PC

8. Product Care 10. Things to try

Y

our device is designed to be durable, but as an electronic device, it must be
treated carefully. Putting unnecessary pressure on it or striking the device
against other objects may cause damage:

1.Do not drop, crush, bend or apply excessive force to the device.

2.Do not expose your device to moisture, extreme or prolonged heat, cold,
humidity, or other adverse conditions. Avoid storing it in damp, humid or wet
places. It is not waterproof.

3.Clean the unit with a soft cloth or damp chamois leather. Never use solvents.

4.The unit can only be opened by qualified person.

5.This device contains magnets. Keep magnetic field sensitive products such
as credit cards and video screen away from this device to avoid damage or
malfunction.

9.LED Instructions

Button/LED

Status-LED

Status-LED

Mic button

V

oice control

button

Color Action Significance

Red

White

Blue

Red

Blue

Flashes
Flashes

Shines

Flashes
Shines

Shines
Shines

Flashes

Slow Flashes

- 13 -- 12 - - 14 - - 15 -

Battery is charging

WLAN-Connection
direct Wi-Fi connection

Connected with router
Searches Bluetooth-

device
Connected With

Bluetooth Device

Alexa feature is of

recording
Processing
Replying

f

Listen to music

"Alexa, turn it up!" Ask Alexa...
"Stop the music" "Pause"
"Next song" "Repeat this song"

Reminders

"Alexa, set a reminder"
Alexa can remind you about things
Ask Alexa...
"Remind me on Saturday to take out the recycling" "What are my reminders this
weekend?"

Order from Amazon

Use your voice to stop 。
"Order light bulbs"
"Reorder toothpaste" "Add a drone to my cart"

Weather

"Alexa, how's the weather?"
Ask Alexa...。
"Will it rain tomorrow?"
"What's the weather in Honolulu?" "Is it sunny in Philadelphia?"

Learn and Be Curios
Ask Alexa all kinds of questions.

"Alexa, why is the sky blue?"
"When's Thanksgiving?"
"How many euros in a dollar?" "What's the capital of Costa Rica?" "How many
people live in Wyoming?"

Federal Communications Commission notice

This device complies with Part 15 of the FCC Rules. Operation of this product
is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.

Specific Absorption Rate (SAR) information

The SAR limit of USA (FCC) is 4 W/kg averaged over 10 gram of tissue. This
model (FCC ID: 2ANXWNQFEB) has also been tested against this SAR limited.
The highest Reported SAR for extremity(hand) exposure condition is 0.16W/kg.

Distributed by
Bluestem Brands Inc.,
7075 Flying Cloud Drive, Eden Prairie, MN 55344
Tel: [phone]
(Monday-Friday 8:00am-8:00pm Central time)