Bluestem M9 User Manual

GURUGEAR

User’s manual (NQFDV NQFEC)

Bluetooth Speaker

ITEM NO:NQFDV(RED)

ITEM CODE:4NQFDV0000010

ITEM NO:NQFEC(BLACK)

ITEM CODE:4NQFECNBL0010

Made In China

CONTENTS

Introduction
Features

Includes

Overview
Speaker Controls & Inputs

LED Operation

Start With NQFDV

Charging the Battery

Power on/off

Bluetooth Pairing

Playing Music

Hands-free For Calling

LED Indicator
Specifications
Warning

Troubleshooting
Contact Information
FCC Warnings

Thanks for your purchase of our Bluetooth Speaker!

Like all our products, great care has been taken in its design. A combination of advanced engineering and
state-of- the-art materials will provide you with years of listening pleasure.

Charging the Battery

⚫ Before using, fully charge the battery using the supplied USB cable. Connect the “DC5V“ USB charging slot

to any USB port supplying power (Laptop, Computer, AC Charger, Car Charger, etc.).

⚫ A solid red LED indicates that the speaker is charging, it will turn off when fully charged.
Power on/off

⚫ Long press Power button to power on/off the unit.

Bluetooth Pairing

⚫ With the speaker turned on, Short press the Bluetooth button, it comes to Bluetooth mode, and blue LED

indicator flashing, Short press the Power button to pair with another speaker as TWS.

⚫ Open the Bluetooth® settings of your phone, tablet or other Bluetooth enabled audio device and select

Pairing name “NQFDV NQFEC”. When prompted for the pairing code, enter 0000.
⚫ Once paired, blue LED will stop flashing. and display Blue.
Note: Shore press the Bluetooth button to disconnect with device or another speaker.

Playing Music

⚫ Select a song, artist, genre, or playlist on your phone, tablet or other Bluetooth enabled audio device.
⚫ Short press the “play/pause” button to start or pause the music.
⚫ Short press + / - button to go to next or previous song.

⚫ Long press + / - button to adjust volume.

Hands-free For Calling

⚫ Pick up or hang up a call by short pressing the “Phone” button.
⚫ Long press the “Phone” button to reject when a new call comes in.
⚫ Short Press the “Phone” button twice quickly to redial the last phone call

LED Indicator

Status of the speaker

Red LED light on

Battery is charging

Red LED light off while charging

Battery is full

Specifications

Bluetooth protocol

V5.0

Online distance of Bluetooth

Appro.10m

S/N

85dB

Power sources

Built-in Lithium-ion battery 600mah

Speaker power:

1*5W

Playing time

About 10hours at 50% volume

Dimensions

92x35x76mm

⚫ Package Contents:
⚫ USB Charging cable
⚫ 3.5mm Aux cable
⚫ This user manual

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.
Contact Information:
Distributed by Bluestem Brands Inc., 7075 Flying Cloud Drive,Eden Prairie, MN 55344 Tel:[phone]
(Monday-Friday 8:00am-8:00pm Central time)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.