Blue Ocean Innovation COMMPASS467, COMMPASS457 User Manual
Pager and Charger Guide
Part Number 321032B4
Premises Pager System®
CommPass® Pagers
GuestPass
MediPass™ Pagers
ShopperPass
™
Pagers
™
Pagers
3
4
1
3
4
7
8
3
4
3
4
1
Introduction:
Congratulations on your purchase of the JTECH Paging System. Please take a
few minutes to review this manual prior to installing and operating your system.
Please inspect the System upon receipt. If the contents appear to be damaged,
notify the shipper immediately to file a claim and notify JTECH Customer Care.
If any component is missing, please contact JTECH Customer Care.
If you have any questions or need assistance, please call JTECH Customer
Care at 800-321-6221 or 561-997-0772, option 6.
CommPass Pager System Components:
3
Charger with
Key Attached
CommPass
Pager with
Standard Insert
Pager Certifications:
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution:
Changes or modifications not expressly approved by the part responsible
for compliance could void the user's authority to operate the equipment.
RSS-Gen:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. Le présent
appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Pager Certifications Components Introduction
2
AC Power
Cord
Jumpers
2.4 A or
7.3A (Optional)
Power Adapter
Mounting
Pager Dimensions/Weight:
LxWxH 5.4x 2.3x 0.9” (137x58x23mm)
Weight 3.5oz (99gm)
Charger Dimensions/Weight:
H
W
3
L
W
LxWxH 7.3x 6.9x 13.1” (184x176x333mm)
Weight (Empty) 6.6lbs (3.0Kg)
Weight (With 20 Pagers) 11.0lbs (5.0Kg)
Multiple Chargers:
L
A single Charger can hold up to 20 Pagers.
Combine two or three Chargers using the optional Jumpers and 7.3A
Power Adapter.
Mounting Chargers:
Chargers can be wall or counter top mounted using the supplied Mounting
Plate.
Wood screws are include for table or shelf mounting.
If mounted to a shelf or table, the four rubber feet on the bottom of the
Charger must be removed.
Wall anchor hardware is user supplied.
H
Mounting Chargers Multiple Chargers Pager and Charger Dimensions/Weight
3
Connecting Power:
1. Insert the Power Adapter plug into the jack at the
bottom of the Charger.
Power
Adapter
Plug
2. Connect the Power Adapter to the Power Cord.
Power Cord
3. Plug the Power Cord into a 120VAC outlet.
4. The green LED on the Charger will light (ON).
Connecting Power to the Charger
Charger
Jack
Charging
Rack
Adapter
120VAC
Outlet
5. Once the Charger is ON, the Pagers can be inserted.
4
Loading...