BlueExpert BEH003
CONTENTS
1. Product Description...................................................................................................... - 1 -
2. Product General Specifications.................................................................................. - 1 -
2.1 General Specifications......................................................................................... - 1 -
2.2 Function button/ indicators.................................................................................. - 2 -
2.3 User Interface ....................................................................................................... - 4 -
3. Charging ........................................................................................................................- 5 -
4. INSTRUCTIONS........................................................................................................... - 6 -
4.1 Bluetooth Headset Fuction ................................................................................. - 6 -
4.1.1 Power On Bluetooth Headset Function............................................................ - 6 -
4.1.2 Power Off Bluetooth Headset Function............................................................ - 6 -
4.1.3 Pairing the BEH003 ............................................................................................. - 6 -
4.1.4 Answering incoming calls....................................................................................- 7 -
4.1.5 Transfer a call....................................................................................................... - 7 -
4.1.6 Earphone Volume Control...................................................................................- 7 -
4.1.7 Ending a call .......................................................................................................... - 7 -
4.1.8 Making a call......................................................................................................... - 7 -
4.2 Stereo Headset Fuction....................................................................................... - 9 -
4.2.1 Listen the music from audio device................................................................... - 9 -
1. Product Description
BEH003 is a wireless MP3 Bluetooth headset Adapter, which enables users to answer
incoming calls wirelessly from Bluetooth Audio Gateway devices when hear the music
form MP3 player.The Bluetooth headset Adapter support Headset and Hands Free Profile
2. Product General Specifications
2.1 General Specifications
Product Name BEH003
Product Category End-user portable product
Bluetooth specification Bluetooth 1.2 compliant
Support Profile Hands-Free, Headset (Headset role only)
Power Class Class 2
Support packet types HV1/HV2/HV3
Support hopping mode USA/EU (79 channel)
Interoperability All devices that support the Bluetooth Headset profile or
Audio Gateway role
Sensitivity <-80dBm@0.1%BER
Output Power -6 ~ +4dBM
Frequency range 2400-2483.5MHz
Size 32mmx32mmx6mm (without clip)
Total Weight To be confirmed
Base color Black
Talk Time 4hrs (To be confirmed)
Standby time 120hrs (To be confirmed)
Packaging To be confirmed
Rechargeable battery 150mA 3.7V
Power Adapter DC 5V adapter
BEH003 User Manual
- 1 -
2.2 Function button/ indicators
Earphone
Talk Button
LED
DC Jack
Volume Down
Power On/Off
Microphone
Volume Up
Audio Plug
BEH003 User Manual
- 2 -
Symbol Functions
TALK button Pairing; Answer a phone call from Bluetooth Audio
Gateway device; Power on/off; T ransfer calls to phone
Volume Up button (+) Adjust volume up
Volume Down button (-) Adjust volume down
Green LED Flash 5 times when Bluetooth headset is turned on;
Flash once every 3 seconds under Standby mode;
Flash twice every 3 seconds during Incoming-call
Mode;
Flash 4 times every 3 seconds during Connected
mode;
LED off during power off mode.
Red LED Flashes when battery is low, battery is charging;
Solid red light when charging is completed;
Flashes 5 times when Bluetooth headset is turned off.
Green and Red LED cross flash under Pairing mode
On Open Bluetooth Headset Fuction Power On/off
Switch Button
Off Close Bluetooth Headset Fuction
Stereo Earphone
Microphone
DC Jack (2.3ψ)
Audio Plug (3.5ψ)
BEH003 User Manual
- 3 -
2.3 User Interface
Below functions should be under Headset switch to power on mode.
The profile that is in use depends on the profile the Bluetooth device supports or is currently
operating. During each connection, there is only one profile is in use. Both profiles can not
exist at the same time in a connection. Please refer to the user’s manual of the Bluetooth
device.
Headset Profile:
Talk Volume Up or Down
Short Press Long Press Short Press Long Press
Off - Power ON - Waiting for a call Voice Dial Power OFF - -
Start Voice Dial
Power OFF - -
Voice Dial
Ringing Answer Power OFF - -
Adjust
Cancel
Call Active End call Power OFF
volume by
Mute
one step
Hands Free Profile:
Talk Volume Up or Down
Short Press Long Press Short Press Long Press
Power Off - Power ON - -
Adjust
Last
Initiate
Waiting for a call
Power OFF
volume by
Number
Voice Dial
one step
Redial
Cancel
Setting up Voice Dial
Power OFF - -
Voice Dial
Ringing Answer Reject - -
Adjust
Call Active (Audio in
End call
Bluetooth headset)
Transfer
Call
volume by
Mute
one step
BEH003 User Manual
- 4 -
3. Charging
The BEH003 is powered by a built-in rechargeable battery and the battery is not fully
charged when the BEH003 was packaged. Therefore, before using the BEH003 in the first
time, please charge the battery using the enclosed 5.0VDC power adapter.
To charge the BEH003, you need to:
1. Connect the lead from the charger to the charger connector and the charger to an AC
wall socket.
2. During charging, Red LED On. It takes 1 to 1.5 hours to fully recharge the battery.
3. When the battery is fully charged, Red LED will shut off.
If Red LED flashes in standby mode that means the battery is low and the battery needs to
be recharged.
BEH003 User Manual
- 5 -
4. INSTRUCTIONS
4.1 Bluetooth Headset Fuction
Below functions should be under Headset switch to power on mode.
4.1.1 Power On Bluetooth Headset Function
1. Press and hold the TALK button for at least 3 seconds until 2 beeps are heard
2. At the same time, Green LED flashes 5 times rapidly for a few times
3. The Bluetooth headset is now turned on. Green LED will flash once every 3
seconds.
4.1.2 Power Off Bluetooth Headset Function
1. Press and hold the TALK button for at least 3 seconds until 2 beeps are heard
2. At the same time, Red LED flashes 5 times rapidly for a few times
3. The Bluetooth headset is now turned off.
4.1.3 Pairing the BEH003
Before you can use the BEH003 Bluetooth headset function, you must pair it. To pair the
BEH003 Bluetooth headset function with the Audio Gateway device like as Cell Phone,
you need to:
1. Turning the BEH003 Bluetooth headset function power OFF
2. Press and hold the TALK button. 2 beeps would be heard after 3 seconds. After 4
more seconds, the two LEDs would cross-flash RED/GREEN. Release the TALK
button.
3. The BEH003 Bluetooth headset fuction is now in pairing mode and is ready to be
paired with a Bluetooth-enabled device.
4. Pair the BEH003 Bluetooth headset function with the device according to the
instructions provided by the device’s user guide. The default passkey is ‘0000’.
5. When pairing success, Green LED flashes every 3 seconds. If the LEDs still
cross-flashes RED/GREEN, it means the pairing was failed. You need to go back to
Step 1 and pair again.
BEH003 User Manual
- 6 -
4.1.4 Answering incoming calls
When BEH003 Headset switch to power on mode a call is forwarded from the paired
device to the BEH003, a ring tone will be heard at the earphone. Press TALK button to
answer the call. Green LED will then flashes 4 times for every 3 seconds periodically.
NOTE: If your BEH003 is paired with NOKIA cellular phone. The phone will control the
BEH003 to auto-accept incoming calls after 2 rings.
4.1.5 Transfer a call
During a phone call, to transfer the call from fixed-line phone to mobile phone, hold Talk
Button for 3 seconds. (Please refer to 2.3)
4.1.6 Rejeck a call
During a ring, to rejeck the call, hold Talk Button for 3 seconds. (Please refer to 2.3)
4.1.7 Earphone Volume Control
Change volume
z Press Volume Up button to turn the volume up.
z Press Volume Down button to turn the volume down.
Mute/Un-mute the microphone
z Press and hold either volume button for at least 2 seconds to mute. The BEH003
Bluetooth Headset Fuction Mode will make a periodic low-tone beep warning that
the microphone is muted.
z Press either volume button once to un-mute.
4.1.8 Ending a call
To finish a call, short-press TALK button on the phone.
4.1.9 Making a call
To make calls using the BEH003 Bluetooth headset fuction as below,
1. Voice Dialing
Needs to be used since there is no keyboard built on the BEH003. Please check if
your phone supports Voice Dialing and then follow the phone’s user guide to record
voice tags.
BEH003 User Manual
- 7 -
The steps of making a call from the BEH003 Bluetooth headset function are:
¾ Press TALK button
¾ Wait for a beep and then say the name of the person you want to call
¾ Please refer to the previous sections for the instructions of earphone volume
control and ending a call.
2. Using mobile phone to dial
The steps of making a call from the BEH003 Bluetooth headset function are:
¾ Just Input dial number form mobile phone and press the dial button
BEH003 User Manual
- 8 -
4.2 Stereo Headset Fuction
Below functions should be under Headset switch to power on mode.
4.2.1 Listen the music from audio device.
1. Plug the ‘audio plug’ into any kind of audio device’s audio jacklike as MP3
2. Then you can play the music form the MP3 player and you can listen the music
from our Headset Stereo Earphone directly.
MP3 Player
3. When you are listening the MP3 music and a phone call is incoming. The BEH003
will mute the MP3 music and switch to the phone ringing. If you wish to pick up the
phone call. You can press the Tlak Button (Please refer to 4.1)
Note: If you want to use the headst function you have to pair the BEH003 with Cell
Phnoe first. (Please refer to 4.1)
4. When you end of the call. The BEH003 will auto un-mute the MP3 music. So, you
can listen the music continue.
5. When the BEH003 battery use up. But you still wish to listen the MP3 music. You
can switch the power button to off mode. Then you can listen the music continue.
But at the same time, you can not accept the incoming call anymore.
6. After you charge the BEH003 battery fully. Please you have to remember to switch the
power button from off to on mode. Otherwise, you can’t accept any incoming call.
BEH003 User Manual
- 9 -
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter. Notice: Any changes or modification not
expressly approved by the party responsible could void the user’s authority to operate the device.
BEH003 User Manual
- 10 -
Loading...