User Instructions
Congratulations on your new inflatable product purchase! Please read all instructions carefully and use at your own risk.
A trained adult supervisor should be present whenever your inflatable is inflated, regardless if it is being played upon.
Precautions
Ensure electrical source is safe (GFCI-protected) and stable before operation.
Keep children away from blower. Do not insert fingers, toes, etc. into the blower, or it may cause injury. Do not
insert foreign objects into the blower, as this will cause damage.
Do not eat, drink, smoke, or have sharp objects, shoes, glasses or jewelry in play area. Keep hands away from
netting.
No tumbling, flipping, colliding, or rough play. Do not allow children that are not similarly sized to use the
bouncer at the same time. Do not exceed maximum number of players or suggested individual weight/height
limits. Participants should stay away from entrances, exits and walls while bouncing.
Keep product away from fire and heat. In case of blower malfunction, tighten blower vent and evacuate play
area immediately.
Do not use in rain, strong wind above 10 mph, or in other extreme weather conditions.
Observe precautions on product WARNING LABEL at all times.
Do not allow children under the age of 3, pregnant players, or anyone with a medical condition to play on your
inflatable product. Adults should also not be allowed to bounce.
Place soft surfaces or materials around all bounce entrances, exits and landings.
Setup/Inflation
Unroll product evenly across smooth, flat, debris-free surface. Connect blower(s) to inlet, and tie. Anchor the
inflatable product and the blower(s) to the ground using stakes, cabling, and/or sand bags.
Plug in and start blower (If your item uses multiple blowers, turn them on one at a time).
Once inflated, confirm the inflatable is properly secured to the ground.
Blower(s) must remain powered on and connected to bounce house at all times while in use.
Deflation/Storage
Ensure that all the players have left play area.
Remove any loose articles or debris from play area.
Turn off, and unplug blower(s).
Once product is fully deflated, fold and store in cool, dry area.
Maintenance and Repairs
Always keep products clean to protect the seams and surface.
Regularly inspect seams and play surface for any necessary repair. Slight damage caused by nature or man-made
factors can be repaired with the repair kit provided.
To repair, deflate the product thoroughly, and ensure surface is dry. Cut patches to sizes suitable for repair.
Apply glue on both the repair patch and the damaged surface. Allow the glue to air-dry for 30 seconds before
adhering the patch to the play surface. Then, allow adhesion to dry for at least 4 hours before use.
Loading...