BlueBuilt Swivel Wall bracket 32-55"" Black User manual

1
3
7
WALL MOUNT.
9
12
17
Brace yourself.
1 2
3
5
4
9
10 11
17
30 minutes 2 people 4 coffees
12
13
14
15
16
6
18
7 8
In the box
TV frames, 2 bag of screws, washers, spacers for the TV, and spirit level,
a mold, 4 bag of screws and plugs for the wall, 5 wall mount, 6 cover caps,
securing bar, 8 velcro for your cables.
Your own tools
Open-end or socket wrench 11mm, 10 cross-head screwdriver, 11 pipe locator,
5mm drill, 13 10mm drill, 14 pencil, 15 hammer, 16 tape measure,
impact or concrete dril 18 a lovely blanket to place everything on.
CHECKLIST.
You’re 50% there.
Suitable surface area:
Solid brick Solid concrete
1. PLACE THE FRAMES
2. INSTALL THE FRAMES 3. MARK DOWN THE WALL
Prior to drilling
Use the pipe locator to check if there aren’t any pipes or cables behind the wall.
Tilting the TV
Use the dials on the sides of the wall mount to tilt the TV when it’s hanging on the wall.
Need help?
Call 010 798 89 99 or visit
Coolblue.nl/en/customer-service
Coolblue isn’t liable for any damage, accidents,
or arguments with boy/girlfriends as a result of
incorrect installation. Not sure if you can do this
on your own? Ask a skilled installation expert
for advice.
Place your TV on a blanket and place the TV frames 1 on your TV as pictured.
Look in bags A through F 2 for the screw that fits your TV. You only need 1 set of screws.
4. DRILL
Drill with precision by first using the 5mm drill, and then the 10mm drill. Drill as deep as the screws 4 are in length.
Hammer de plugs 4 into the drill holes.
Secure 1 screw. Extra space? Place washer (G) or spacer (H or I) in between.
Now secure the other 3 screws in the same way.
Draw an X on the wall where the middle of the TV should align.
Place the mold 3 on the wall so you can see the X you’ve just drawn using the marker and draw the drill holes using the spirit level (J).
5. INSTALL THE WALL MOUNT 6. SECURE THE WALL MOUNT
Screw the wall mount 5 to the wall with the washers 4 in between.
Place the cover caps 6 on the wall mount.
Lift the TV with 2 people and attach it to the wall mount.
Place the securing bar 7 in the opening on the bottom of the frames.
Done! Pat yourself on the back, turn on the TV, and bask in the glory of your accomplishment.
CBL1163
Loading...