BlueBuilt Rotatable Wall mount 19-40"" Black User manual

1

7

WALL MOUNT.

8

12

16

Brace yourself.

1 2

3

4

8 9

15

30 minutes 2 people 4 coffees

10

11

12

13

14

5

76

16

In the box

Bag of screws and plugs for the wall, 2 bag of screws, washers, spacers for the TV,

spirit level, and securing bar 3 TV frame, 4 wall mount, 5 cover caps, 6 a mold,

velcro for your cables.

Your own tools

Cross-head screwdriver, 9 pipe locator, 10 5mm drill, 11 8mm drill,

pencil, 13 hammer, 14 tape measure, 15 impact or concrete drill

a lovely blanket to place everything on.

CHECKLIST.

You’re 50% there.

Suitable surface area:

Solid brick
Solid concrete

1. PLACE THE FRAME

Place your TV on a blanket and place the
TV frame 3 on your TV as pictured.

2. INSTALL THE FRAME 3. MARK DOWN THE WALL

Secure 1 screw. Extra space?
Place washer (G) or spacer (H) in between.

Draw an X on the wall where the middle of
the TV should align.

Prior to drilling

Use the pipe locator to check
if there aren’t any pipes or
cables behind the wall.

Need help?

Call 010 798 89 99 or visit
Coolblue.nl/en/customer-service

Coolblue isn’t liable for any damage, accidents,

or arguments with boy/girlfriends as a result of

incorrect installation. Not sure if you can do this

on your own? Ask a skilled installation expert

for advice.

CBL1162

Look in bags A through F 2 for the screw
that fits your TV. You only need 1 set of
screws.

4. DRILL

Drill with precision by first using the 5mm
drill, and then the 8mm drill. Drill as deep as
the screws 1 are in length.

Hammer the plugs 1 into the drill holes.

Now secure the other 3 screws in the same
way.

Place the mold 6 on the wall so you can
see the X you’ve just drawn using the
marker and draw the drill holes using
the spirit level (I).

5. INSTALL THE WALL MOUNT 6. SECURE THE WALL MOUNT

Drill the wall mount 4 onto the wall. Use
the spirit level for accuracy.

Place the cover caps 5 vast op de
muurbeugel.

Lift the TV with 2 people and attach it to the
wall mount.

Place the securing bar (J) in the groove and
attach it with the tie wrap (J).

Done! Pat yourself on the back, turn on
the TV, and bask in the glory of your
accomplishment.