1
6
10
15
PLACING A MONITOR ARM.
Arm wrestling.
1
2
3
5
4
25 minutes 1 person 1 cup of coffee
7
8
13
9
14
10
In the box:
6
Column, 2 Base, 3 Clamp, 4 Mounting plate monitor (2x), 5 Monitor arm,
Protective plate, 7 Adjustable screw (2x), 8 Adjustable nut (2x), 9 M6 x 20mm (3x),
M8 x 12mm (2x), 11 M4 x 12mm (8x), 12 M5 x 12mm (8x), 13 Screwdriver, 14 Hex key,
Cable binder.
11
15
12
Your own tools:
Desk, Monitor.
4
2
CHECK.
You’re 50%
there.
Suitable surface:
Desk
With the included
screwdriver, you can tighten
any included screw. Remove
the handle and turn over the
screwdriver if it doesn’t fit
Monitor:
Disconnected and without
base.
1.
MOUNT THE MONITOR
PLATE
Lay your monitor down flat and place the
mounting plate 4. Use M4 x 12mm 11
and M5 x 12mm 12 to secure the plate to
your monitor.
4.
PLACE THE COLUMN
ON THE DESK
2.
FASTEN THE BASE ONTO
THE COLUMN WITH SCREWS
Secure the column 1 to the base 2
with M6 x 20mm 9.
5.
PLACE THE ARMS ON THE
COLUMN
3.
ATTACH THE CLAMP TO
THE BASE
Attach the clamp 3 to the base 2
with M8 x 12mm 10 and the hex key 14.
ATTACH THE MONITOR
6.
TO THE ARMS
Need help?
Call us on 010 798 89 99
or visit Coolblue.nl/en/
customer-service
Coolblue isn’t liable for any damage, accidents,
or arguments with your significant other as
a result of incorrect installation. Not sure if
you can do this on your own? Ask a skilled
installation expert for advice.
Coolblue.nl/en/BlueBuilt
BBMA102
Stick the protective plate 6 under the base
and place the column on the desk.
Tighten the hand screws on the bottom of
the clamp 3 until the column is secured to
your desk.
Place the arm 5 on the column 1 and
tighten it using the handle.
Place the monitor with the mounting plate
on the arm 5 using the adjustable
screw 7 and the adjustable nut 8.
Loading...