BLUEBIRD BM300 User Manual

Before use, always read warning and safety information thoroughly and
always obey them.
Please note that this manual may be different according to the conditions such as the software version or mobile phone business partner, and changed without notice.
BM-300
1
This manual is protected by copyright laws.
This manual has been prepared sincerely by BluebirdSoft Inc., but may be different to the real due to edit error, information omission, and etc. But in no event shall we be liable for any problems occurred due to this.
The program provided with this product is copyrighted and its reproduction, deletion, movement, and etc. is prohibited without the permission of the manufacturer.
Some function of this product may lead to some problems in the operation according to the available conditions, usable program, peripheral equipments, and etc.
This wireless equipment has the possibility of radio interference and no service permitted in connection with human health and security.
Registered Trademark
PIDION is protected by copyright laws registered worldwide by Bluebirdsoft Inc., a global brand which presents the reliable, representative, and high tech images, as a leading brand of future mobile fields.
Users Instruction
Type
Class B
(A home information and
communication equipment)
This equipment has been tested and found to comply with the limits for a Class B
digital device. It can be used in any other places besides in a residential installation,
provided with reasonable protection against harmful interference.
Users Instruction
2
Safety Information
Do not use PDA at PDA restricted area and Potentially Explosive Area.
If PDA or battery contacted to the water, do not heat or dry the battery in an oven or micro wave.
If PDA or battery contacted to the water or liquid, the phones label color changes. (This time, it cant be repaired free of charge and be attention to use the PDA.)
All batteries can cause property damages, injury, or burns if a conductive material such as jewelry, keys or beaded chains touches
exposed terminals. To protect against such unwanted touch, exercise care in handling any charged battery.
In particular when placing the battery in very hot or cold area for long, it can cause the reduction of capacity or life.
Use only the designated and supplied batteries and adapters. They cant be used for other purposes, excepts for our companys
terminal.
If not used the battery for long, always store the charged battery at a room temperature.
Though charged sufficiently, the battery life changes due to its own feature.
Do not use any other type of battery in your equipment. Otherwise, it can cause the reduction of life in battery or PDA itself as well
as the risk of explosion.
Do not watch DMB during driving (bicycles, automobiles, auto bicycles, and etc.), walking, climbing the mountain, and etc.
If DMB receiving antenna touches exposed conductive areas such as power receptacle and etc., it can cause an electric shock.
If touched with antenna, it can cause human injury. Keep the child away from the antenna.
If a failure occurred, never revise, disassemble, or repair the product. Please contact the service center of our company.
If you are allergic to exposed paints, stop using the PDA and consult a doctor.
Do not apply the PDA with paint or dyes. Otherwise, it can cause damage in the appearance or screen or abnormal operation of
the product.
Make sure to protect DMB antenna, headphone, or earphone not caught or tight by other materials.
If used for long at hot/high humidity environments, it can cause a fault.
There can be Not serviceable area. Always check for terrestrial DMB reception area.
Terrestrial DMB broadcasting may be deteriorated in picture quality irrespective of reception.
With poor reception of broadcasting, point up the antenna and then change the direction to find the optimum conditions.
If you folded the antenna in a different direction, it can cause a breakdown.
If touched PDA with sharp objects such as pins, nails, ball pens, and etc. instead of the stylus, the screen may get scratche
Avoid vibration and shock. If not used, turn off the power and store it at a safe place.
Connect the adapter firmly. If smoke, smell, noise, and etc. occurred in the product, immediately power off the product and
disconnect the adapter. In thunder or lightning, always disconnect the adapter.
This wireless equipment has the possibility of radio wave interference so no service permitted in connection with human safety.
For your safety, please read the guidelines below carefully before you use the product .
d.
3
Product Information
Product Components
[Body]
[USB cable]
Thanks for your purchasing PIDION. Make sure that the package contains all of the above contents.
The picture or photo may differ from that illustrated in the users manual according to the model (If you want
additional accessories, contact Customer Information Service Center).
[Adapter] [Standard
[Stylus]
Battery]
[Ear phone]
[Users Manual, CD]
4
Product Information
Each Part Name and Button
[Battery Indicator LED]
[IrDA Port]
[24 pin terminal]
[Speaker]
[Wireless Indicator LED]
[Hand strap]
[DMB Antenna] [SD Card Slot]
[Reset Button]
[LCD]
[Speaker]
[2.5 pi Earphone Jack]
[Power Button]
[DMB Button]
[HOLD]
[Calend ar]
[Job]
[Omni­directional Function Key]
[Received Letter Box]
[Media Player]
[Battery Cover]
6
Product Information
Using Remote Controller
[Vol. +- Button]
Used for listening to the music, watching video or DMB, and etc. Vocal recording enabled through microphone and hands free through Internet Telephone.
Operable only in the approved program. HOLD button separated from the that of body. HOLD function enabled only in the Remote Controller.
[3.5 pi earphone jack]
[Send Button]
[Previous Button]
[Play/Stop Button]
[Next Button] [M
Button]
[Mic]
[HOLD]
Name
Send
se
M
Vol. +
Vol. -
General Control
Short – Memo Long – Vocal recording
Previous music of media player
Play/pause of media player
Next music of media player
Media player operation
Volume UP
Volume DOWN
DMB Control Button
Short – Memo Long – Vocal
recording
Previous channel Previous
Screen Toggle Play/Pau
Next channel Next
If you have no remote controller provided with the shipment of product, it may be impossible to operate. Always use only the remote
Hold
controller provided with the product. If installed or removed at the body by force, it can cause a failure to the equipment.
Hold
7
Product Information
Battery Installation and Removing
SD Memory Card
Battery Installation Grip Insertion Area
[Battery
Installation]
1. Slip the battery into the battery compartment top edge first.
2. Insert the Battery Cover.
[Removing the
Battery]
1. If pushing the center of battery cover slightly, the cover removes.
2. Using the stylus, remove the battery from the right groove.
After the metal terminal of memory faced toward the bottom of rear, push to the end. If slightly pressed the end of memory visible at SD Slot, it removes.
Frequent insertion/removal of
memory or excessive force can cause a failure on the equipment.
If removed the card and turned off
the power while using the memory card, it can cause a data loss or mis-operation of memory card and PDA.
Always backup the important data
at PC. Otherwise, the manufacturer assumes no liability for data loss.
If the memory card removed well,
do not remove the card forcedly and contact the AS center. If necessary, you can replace it with the applicable product or refund it.
Always charge the battery only using the supplied adapter.
It can be charged with 24 pin(The Standard specified by the Ministry of Information and Communication) charger for general mobile phones. (It may be discharged gradually after full charging due to the nature of the standard charger).
8
Product Information
Conditions by Battery Charging and LED Color
< Battery
Precautions >
< Charging and Usable Time >
Battery is consumables and its usable time may
be reduced over times.
2 and a half hours When charged with PC
Battery can cause a heat according to the
conditions.
When charged with adaptor
Max. Usable Time
< LED while battery charging >
2 hours
Normal : 12hours
Watching DMB : 4 hours
If batterys life reduced more than the half of the
first use, please change with new battery. (Guaranteed period; 6 months).
Batterys life may differ according to the
brightness of LCD, temperature, used time of battery, and etc.
Bluetooth, if remained for long at the area where
no wireless internet available, its usable time may
While Charging
Charging
Completed
be reduced rapidly due to enormous consumption of battery. (Bluetooth, always set the function to off if not
Green Orange Charging Lamp
< Wireless Indicator LED >
used wireless internet)
After a completion of charging, you can leave the battery installed at the charger. It cant cause
damage to the product.
DMB Bluetooth Wireless
Orange Blue Blue Wireless
lamp
If the product not fully charged, a warning message appears with a beep. The charging time of users manual varies according to the conditions. Besides, new batteries are shipped with partly charged. Always use the fully
charged battery.
If the lamp not illuminated at the body while
charging, it can be occurred due to misconnection of cables. Remove and then reconnect the cable.
If disconnected the battery while using, it can
cause the initialization of PDA and a data loss.
With a low battery, it may cause hard reset.
9
Basic
Information
Startup Using the Stylus
1. Press the power button of PDA.
2. Window mobile logo screen appears on the LCD.
3. Perform stylus point setup and setting as guided in PDA.
4. After a completion of setup, Today screen appears.
As the stylus to be attached at the hand strip or case, it can be used to run the program on the touch screen or enter the data directly.
Tab Touch the screen once with the stylus to open items or select options.
Drag Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to select multiple items. The same function as in field select on the desktop.
Tab and Hold Tap and hold the stylus on an item to see a list of actions available for that item. If tap and hold the item, a pop-up menu appears. The same function as in the Right Click of mouse on the desktop.
In Point Setup, press a cross-hair object exactly, or it appears repeatedly.
It can cause a scratch or a failure on the LCD screen.
Do not use sharp objects such as pin, nail, and etc. instead of the stylus with soft tip.
10
Loading...
+ 22 hidden pages