BLUEBIRD BIP5XX0 Users Manual
-Before starting, ensure that you read and follow the “Safety Warnings and Precautions” section of this manual.
Safety Warnings and PrecautionsSafety Warnings and Precautions
: Please follow the instructions to properly use the product and avoid accidents in advance.
1. Exercise precautions when using the battery
- If the batteries are damaged, severely shocked, heated, exposed to moisture or high temperatures, or
bored by a gimlet, it may explode.
- Keep batteries away from children and pets.
2. Do not use PDA phone in explosion areas.
3. Do not use PDA phone on an aircraft or inside a hospital.
4. Avoid using PDA phone or checking phone numbers while driving. Use hands free kit in unavoidable conditions
or use it after stopping the car
5. Product may deform or malfunction if exposed to direct sunlight
6. Prevent conductive objects such as necklaces and coins from making contact with the battery plug. Do not
shock battery with sharp objects or animals. Battery may explode.
7. Only use recommended batteries and do not use with other products. Do not use inferior quality battery as
doing so may shorten battery and PDA life span and cause explosion. (Warranty is void in this event)
8. Battery must be charged with the adapter or standard charger provided. Usage of unapproved adapter may
shorten battery life or cause explosion. (Warranty is void in this event)
9. If the PDA gets wet, never insert or place the terminal, battery, or charger into or near heating devices, such
as heaters or microwave ovens . This may cause production deformation, explosion or fire. (The label’s color
inside the PDA or battery will fade if immersed in water.) Please note that free repair service won’t be provided
in this condition.)
ContentsContents
I. Safety and precautions – Warning and cautions
II. Contents
1. Product composition
2. Get to know the product
1) Left, front, right side of product
2) Button introduction
3) Specifications
3. Getting started
1) Connecting and disconnecting the battery
2) Charging battery
3) Using PDA
4. Start connecting network
1) Scan
2) ear jack (Converter)
3) Reset PDA
4) Host PC connecting
5) IrDA 사용 Using IrDA
6) Bluetooth
7) How to Use Wireless Manager
8) Using memory card
5. ActiveSync
1) Installing ActiveSync
2) Precaution for using ActiveSync
6. Using PDA phone functions
7. Using Wireless LAN features
8. Precautions
9. Appendix
1) Q&A
2) Accessories
Product CompositionProduct Composition
The following illustrations may differ from actual products. Please contact our customer center to purchase
additional or optional products.
[BIP-5000 PDA 1 unit] [BIP-5000 Cradle 1 unit] [Battery (standard)] [Stylus]
BIP-5000
[Power cable] [Adapter] [USB cable] [User manual]
Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 2 >
Knowing the productKnowing the product
1. Front, left side, back, right side
Antenna
Power(LED)
GSM
(LED)
Function
key
Alpha key
Enter key
Speaker
Barcode/
Camera
Button
ear jack
IrDA
Power button
Call button
Microphone
Barcode
scanner
window
Reset
Camera
Flash
Barcode/
Camera
Button
Hand
Strap
Battery Case
Fixed screw
BIP-5000
[Front] [Right side] [Back] [Left side]
Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 3 >
Knowing the productKnowing the product
2. Button introduction
Use it to turn on/turn off the PDA
Laser(1D,2D) Barcode / Camera Type : Press left button to use barcode scanner
Press right button to use camera
CMOS Barcode Type : Use right and left button to activate barcode.
Execute after user input
Change character input mode. Default mode is numeric. Press once for lower case
English, press twice for capital English, press three times for special characters.
Execute program and make phone connection. Press once to execute phone program,
press twice to view recent calls, press three times to call the selected number.
BIP-5000
Delete a character by moving the cursor one space to the left.
Move one space to the right.
Press 3 seconds to enable/disable silent mode
Press 3 seconds to lock the PDA. Password must be inserted to use the PDA.
Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 4 >
Knowing the productKnowing the product
3. Specifications
DescriptionContents
CPU
OS
DISPLAY
INTERFACE
CAMERA
BATTERY
SIZE
WEIGHT
ADAPTER
Intel PXA270 520MHz
Window Mobile 5.0
3.5”, 240 x 320 / 260,000 color
1 x USB 1.1 Client / Host
1 x RS-232C
Mini-SD slot
IrDA 1.2 (Option: Bluetooth class )
2.0M pixel camera
2000mAH
79.5(width) x 150.3(length) x 34.9thickness) mm
314 g
5V 2.4A
BIP-5000
Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 5 >
Knowing the productKnowing the product
3. Specification
FCC Compliance Statement
FCC NOTICE: This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This devices may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generate, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
BIP-5000
Caution: Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user’s authority to operate the equipment.
Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 6 >
Knowing the productKnowing the product
3. Specification
European Union Notice
This product satisfies all the technical regulations applicable to the product within the scope of
Council Directives 1999/5/EC, 89/336/EEC and 73/23/EEC.
Radio : ETSI EN 301 511 / ETSI EN 300 328
EMC : ETSI EN 301 489-1/7/17, EN 55022, EN 55024, EN 61000-3-2/-3
Safety : EN 60950-1
Health : EN 50360 / EN 50361
BIP-5000
Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 7 >
Knowing the productKnowing the product
3. Specification
FCC RF EXPOSURE INFORMATION
WARNING! Read this information before using your phone
In August 1996 the Federal Communications Commission (FCC) of the United States with its action in
Report and Order FCC 96-326 adopted an updated safety st andard for human exposure to radio
frequency (RF) electromagnetic energy emitted by FCC regulated transmitters.
Those guidelines are consistent with the safety standard previously set by both U.S. and international
standards bodies. The design of this phone complies with the FCC guidelines and these international
standards.
CAYTION : Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or
attachments could impair call quality, damage the phone, or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin,
a minor burn may result. Please contact your local dealer for replacement antenna.
BIP-5000
Body-worn Operation
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. BIP-5000 Device (FCC ID:
SS4BIP5XX0) has also been tested against this SAR limit. The highest SAR value reported under this
standard during product certification for use at the ear is 0.573 W/kg and when properly worn on the
body is 0.956 W/kg.
Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 8 >
Getting startedGetting started
1. Connecting and disconnecting the battery
[Connecting the battery]
• Sit the battery to the groove,
Put the cover and swivel the screw
[Disconnecting the battery]
• Swivel the screw in arrow direction until
detached, take off battery
BIP-5000
* Battery must be taken off after turning off the PDA. Sudden power break may cause the PDA malfunction.
Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. < 9 >
Getting startedGetting started
2. Charging the battery
[While connecting the adapter to the table charging cradle]
[While connecting the adapter to PDA directly]
BIP-5000
*Connect the adapter with table charging cradle as showed
• Note: Using the provided/approved adapter is the most safely and effective way to use PDA.
* Connect the converter attached jack with PDA
Copyright © 2005 Bluebird Soft, Inc. All Rights Reserved. <10>
Loading...