BLUEBIRD BI300 User Manual

1. Laser Warning

BI-300 Series Manual

2

2

2. Battery-Related

Cordless Barcode Scanner

Battery Precautions

Do not subject the battery to shock such as dropping, and do not disassemble. (Doing so can result in malfunction, shortening of

battery life, and/or danger from overheating.)

Do not place the battery near any source of heat such as a heater, microwave oven, etc. (Doing so can result in explosion.)
Only use authentic authorized batteries and chargers. (Neglecting to do so can result in explosion and/or fire, as well as

shortening of battery life.)

Do not allow the battery terminal (metal portion) to come into contact with any electricity-conducting object such as necklaces,
coins, etc. (Doing so can result in overheating of the battery and object in contact, thus posing the risk of fire.)
Do not leave the battery on a car dashboard under direct sunlight or in a sealed high-temperature area. Store indoors under
room temperature. (Neglecting to follow this instruction can result in explosion.)
Store in a place away from children and/or pets to prevent placing in mouth and/or biting. (Neglecting to do so can result in

product damage and/or bodily injury.)

Due to the nature of the battery, usage time may shorten even after fully charged due to low voltage.

Battery Operation Temperature : 0°C to 40°C

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS

3

2

2. Battery-Related

Battery Replacement1

[Battery Removal]

Turn the BI-300 power off.
Turn the screw on the battery cover counter-clockwise to loosen, then remove.
Lift off the battery cover in the direction of the arrow.
Turn the screw clockwise to fasten firmly.

BI-300 Series Manual

4