Blueair 480i, 405 User Manual
Blueair Classic 400 series
User Manual| Benutzerhandbuch | Manual de
usuario | Guide d’utilisation | Instrukcja obsługi
English | Deutsch | Español | Français | Polski
3
Before using Blueair Classic 400 series, please read this user manual carefully.
Note:
There may be local variations of these models.
Contents
General 4
Overview of unit 5
Adjusting fan (air flow) speed 5
Safety information 6
Placing the unit 7
Getting started 7
Control panel and touch buttons
8
Blueair Friend mobile app settings 9
Filters 10
Changing the filters 11
Care and Maintenance 12
Classic 480i/405 technical specifications 13
54
1. Control panel
2. Blue LED
3. Front cover
4. Handle
5. Air inlet (right side)
6. Air outlet (left side)
7. Back cover
8. Particle filter, or
9. SmokestopTM filter
10. Kit box
- welcome card
- user manual
4
4
5
6
7
8 9
10
1
2
3
4
Adjusting fan (air ow) speed
Please refer to the table below to see the different options available for controlling your air purifier.
Overview of unit
Control options 480i 405
Manual control via touch buttons on control panel
Remotely via the Blueair Friend mobile app.
Automode based on air quality readings from the built in
sensors. This function may be activated either via the
touch button on the control panel or via the Blueair Friend
mobile app.
Automode based on air quality readings from the external
air quality monitor Blueair Aware. This function is activated
via the Blueair Friend mobile app.
Min
Speed 1 Speed 2
Max
Speed 3
Min
Speed 1 Speed 2
Max
Speed 3
Maximum speed is recommended for fast initial cleaning, during the day or when the air is heavily
polluted. Minimum speed is recommended for nighttime use.
General
Blueair 400 series
Blueair 400 series air purifiers are Wi-Fi enabled
and are available in two models. The 480i models have built-in sensors for PM2.5, VOC, temperature/humidity, and the 405 models with no
built-in sensors.
Adjustments to the air purifiers can be made
manually anywhere and at any time, either via
the touch buttons on the control panel located
under the flip-up lid, or remotely via the Blueair
FriendTM mobile app.
Wi-Fi
FILTER
Wi-FiFILTER AUTO PM 2.5VOC
The air purifier can also be automatically regulated based on the air quality readings from the
built-in sensors (480i), or the optional external air
quality monitor Blueair AwareTM (405)
For more information on how to use your air
purifier together with the Blueair Aware air
quality monitor, please see the Blueair Aware
owner’s manual and the support information.
405 model480i model
76
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
FCC ID: 2AEX3-4XXZ-CC
IC: 20267-405
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con nected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation
distance of at least 20 cm from all persons.
Safety information
The Blueair 405 and 480i air purifiers are electrical appliances. Please read the safety instructions
before use and take the necessary precautions to reduce the risk of fire, electric shock or injury. The
Blueair Limited Warranty applies only if the unit is used according to these instructions.
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or
moderate injury.
General
WARNING: To avoid a hazard, a damaged supply cable must always be replaced
by the manufacturer, service agent or similarly qualied person.
• Use the grounded power cable provided with your Blueair air purifier unit to plug
directly into an appropriate, grounded electrical outlet. (Refer to the rating label on
your unit)
• Do not alter the plug in any way.
Intended use
CAUTION: Supervise children to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
98
4 ins
10 cm
Place the unit in a location where air can cir-
culate freely in, out and around the unit.
Do not place the unit closer than 4” (10 cm)
from another object.
Do not place the unit directly on or against
soft furnishings such as bedding or linen.
Do not place the unit near sources of heat,
such as radiators, fireplaces or ovens.
Do not place the unit near wet areas, such
as bathrooms or laundry rooms where it
may come into contact with water.
Do not place the unit outdoors
Step 1
Plug the fixed power cable into a grounded
wall outlet. If you have a unit with a removable power cable, then plug the cable firmly
and completely into the recessed power
cable socket located at the bottom of the
unit before plugging the other end of the
power cable into a grounded wall outlet.
Step 2
Download the Blueair Friend mobile app to your smartphone from your app store (Apple App Store
or Google Play).
Step 3
Connect your unit to your Blueair Friend mobile app. Start the app and follow the instructions.
After connecting your air purifier to the Blueair Friend mobile app, you can use the app to control the
unit remotely and adjust settings.
Getting started
Connecting your air purier - 480i and 405
Follow the instructions below to connect your air purifier to your Blueair Friend mobile app. You can
then enable remote control.
Placing the unit
FILTER
Wi-Fi
Blinking
Blinking
AUTO
VOC
PM 2.5
Wi-Fi
FILTER
Open the flip-up lid and press the airflow speed touch button. When the Wi-Fi symbol starts to blink,
the air purifier can be paired with the Blueair Friend mobile app.
Control panel and touch buttons
The control panel and touch buttons are located under the flip-up lid (see Step 2 “Starting up the
unit”). A grey circle around a touch button indicates that it is inactive. When the unit is turned on, all
touch buttons on the control panel (except for airflow speed control); will dim down after 20 seconds.
Tap the control panel and the touch buttons will light up again.
Wi-Fi FILTER
Status “blinking” - no connection.
Wi-Fi ready to be connected.
Wi-Fi
Status grey - OFF (no Wi-Fi)
Air flow speed control
Status grey - OFF
Status blue and all bars are grey the power cable is plugged in.
Status grey and blue
Wi-Fi connected
Filter
Status grey and blue -no replacement
filter currently needed.
Status orange - replace filter and
reset by pressing down for 5 seconds.
Status 1 blue bar - minimum speed
Status 2 blue bars - medium speed
Status 3 blue bars - maximum speed
Classic 405 control panel touch buttons
1110
Auto speed
Status circle blue - unit is on
Status symbol grey - Auto speed OFF
Status symbol blue - Auto speed ON
PM2.5 indicator
Status blue - from excellent to moderate pollution levels.
Status orange - from slight to high pollution levels
VOC indicator
Status blue - from excellent to
moderate pollution levels
Status orange - from slight to high
pollution levels
Wi-Fi AUTOFILTER
PM 2.5
VOC
Classic 480i control panel touch buttons
Blueair Friend mobile app settings
Please note that you must first add your air purifier unit to the Blueair Friend mobile app before you can
control the following settings via the app:
Adjust airflow speed
Changes the fan speed between speed 1, 2 and 3.
Adjust LED intensity
Changes the LED intensity for those lamps that are visible.
Child lock
Regulates your ability to control the air purifier unit via the control panel on the unit.
Auto mode
Automatically controls the fan speed based on readings either from the built-in sensors (”i”
models only), or from the external air quality monitor Blueair Aware.
Night mode
Allows the activation/deactivation of certain settings at specific times.
See Blueair Friend mobile app for further information regarding pollution and threshold
levels
Filters
General information
The unit is delivered with one HEPASilent
TM
filter already installed.
Particle filters remove:
DustPM2.5 Pollen ParticlesPet dander Mold
Smokestop
TM
filters remove all the above pollutants, plus:
Smoke
VOC
Dust mites Bacteria
Chemicals
Cooking odors
IMPORTANT! Use only genuine Blueair filters to ensure proper function of your unit and to
qualify for full warranty coverage.
Blueair lter subscription program
This convenient service is available in some countries – contact your local Blueair retailer to find out if
you can join.
Model number
Serial number
Retailer’s name
Retailer’s address
Date of purchase Telephone number
Filter checklist
To make it easy to find the right filter in the future, please fill in the customer record below and keep
this user manual for reference. The model number and serial number of this product can be found on
the rating label on the bottom of the unit.
1312
Changing the lters
Step 2
Slide out the filter.
Step 1
Open the back door.
Step 4
Slide the replacement
Blueair filter back into
the unit.
Step 3
Vacuum inside the unit
with a soft brush attachment.
Step 5
Close the back door,
plug in the unit and
turn on.
The unit is now ready
for use.
IMPORTANT!
Always turn off and disconnect the unit from the supply mains before changing filters, cleaning or
carrying out maintenance procedures..
Status orange - replace filter and
reset by pressing down for 5 seconds.
Care and maintenance
We recommend routine cleaning in order to keep your unit in top condition.
When changing lters
1. Wipe clean the underside of the lid after removal.
2. Vacuum the air inlet grille from the inside using a soft brush and/or other suitable attachment.
3. Vacuum the small air inlets with a soft brush attachment.
General
1. Wipe the exterior of the unit with a soft, clean, damp cloth.
2. Never clean with gasoline, chemical solvents or corrosive material as these agents may damage
the surface.
3. Do not allow foreign objects to enter the ventilation or exhaust openings. This may cause electric shock or damage the unit.
4. Do not try to repair or adjust any of the electrical or mechanical functions on your Blueair unit
yourself. Contact your local dealer or Blueair for warranty information.
Help and support
If you have questions about Blueair Classic series, please visit www.blueair.com or contact your
local Blueair retailer.
Warranty information
The Blueair Limited Warranty applies only if the unit is used according to the instructions in this
manual.
1514
Classic 480i/405 technical specications*
CADR (cfm)**:
Room size 434 sq.ft. (40 m2)
Air Changes per Hour *** 5
Airow (Speed 1-2-3) 120-200-350 cfm
Size (HxWxD): 23 x 20 x 11 in. (590 x 500 x 275 mm)
Product weight: 33 lbs (15 kg)
Energy consumption
(Speed 1-2-3)****
15-25-90 W
Sound pressure levels
(Speed 1-2-3)
32-42-52 dB(A)
Filter replacement indicator Yes
Speed control options 1-2-3, non-touch, smartphone (Automode)
1-2-3, non-touch, smartphone
Air quality sensors Built-in sensors for VOC, PM2.5, temperature and humidity
No sensors - optional use with Blueair Aware
The entire unit can be recycled.
External network issues affecting the product performance are beyond the control of Blueair. Please contact your
Internet service provider for assistance.
480i
405
480i
405
Dust
300
Pollen
300
280
Smoke
*
**
***
****
Specifications based on U.S. models (120 VAC, 60 Hz with particle filter)
The CADR indicates how much filtered air is delivered (airflow) by the air purifier operating at the highest
setting, and how well the system removes tobacco smoke, dust and pollen pollutants from the air (efficiency).
Tests are performed in accordance with ANSI/AHAM AC-1. The maximum possible CADR ratings according
to this standard are: Tobacco Smoke: 450 cfm. / Dust: 400 cfm. / Pollen: 450 cfm.
Air changes per hour are calculated on the recommended room size, assuming 8-foot (2.4 m) ceilings. For
smaller rooms, the air changes per hour will increase.
The available electrical power voltage and frequency affects the power consumption of the unit. The power
consumption might therefore be different from the stated value.
Bitte lesen Sie diese Bedienungsanleitung vor der Anwendung des Blueair Classic der Serie 400 sorgfältig durch.
Hinweis:
Die Version dieser Modelle kann je nach Region in unterschiedlich sein.
Inhalt
Allgemeine Hinweise 4
Übersicht über das Gerät 5
Einstellen der Lüftergeschwindigkeit (Luftdurchsatz) 5
Sicherheitsinformationen 6
Aufstellungsort 7
Erste Schritte 7
Bedienfeld und Berührungsschalter
8
Einstellungen für die mobile App Blueair Friend 9
Filter 10
Wechseln der Filter 11
Pflege und Wartung 12
Technische Daten: Classic 480i/405 13
1716
Allgemeine Hinweise
Blueair Serie 400
Blueair Luftreiniger der Serie 400 sind WLANfähig und in zwei Modellen erhältlich. Die Modelle 480i sind mit eingebauten Sensoren für
PM2.5, VOC, Temperatur/Luftfeuchtigkeit ausgestattet. Die Modelle 405 verfügen über keine
eingebauten Sensoren.
Über die Berührungsschalter unter dem Klappdeckel auf dem Bedienfeld bzw. über die mobile App Blueair FriendTM lassen sich die Einstellungen der Luftreiniger jederzeit manuell bzw.
aus der Ferne ändern.
Wi-Fi
FILTER
Wi-FiFILTER AUTO PM 2.5VOC
Der Luftreiniger kann auf Basis der Luftgütemessungen der eingebauten Sensoren (480i)
oder über den optionalen externen Luftgütemesser Blueair AwareTM (405) auch automatisch
geregelt werden.
Das Handbuch und die Supportinformationen
für Blueair Aware enthalten weitere Informationen zur Anwendung des Luftreinigers in Kombination mit dem Luftgütemesser Blueair Aware.
Modelle 405Modelle 480i
1. Bedienfeld
2. Blaue LED-Anzeige
3. Abdeckung vorne
4. Griff
5. Lufteinlass (rechte Seite)
6. Luftaustritt (linke Seite)
7. Rückseitige Abdeckung
8. Partikelfilter oder
9. SmokestopTM Filter
10. Zubehör
- Begrüßungsmitteilung
- Bedienungsanleitung
4
4
5
6
7
8 9
10
1
2
3
4
Einstellen der Lüftergeschwindigkeit (Luftdurchsatz)
In der nachstehenden Tabelle sind die verschiedenen Steuerungsmöglichkeiten des Luftreinigers aufgeführt
Übersicht über das Gerät
Steuerungsmöglichkeiten 480i 405
Manuelle Steuerung über Berührungsschalter auf
Bedienfeld
Aus der Ferne über die mobile App Blueair Friend
Automatischer Modus auf Basis der Luftgütemessungen
der eingebauten Sensoren. Diese Funktion ist entweder
über die Berührungsschalter auf dem Bedienfeld oder
über die mobile App Blueair Friend zu aktivieren.
Automatischer Modus auf Basis der Luftgütemessungen
des externen Luftgütemessers Blueair Aware. Diese
Funktion ist über die mobile App Blueair Friend zu
aktivieren.
Min
Speed 1 Speed 2
Max
Speed 3
Min
Speed 1 Speed 2
Max
Speed 3
Zur ersten Reinigung, im Tagesbetrieb oder bei starker Luftverschmutzung wird die höchste Stufe
empfohlen. Die niedrigste Stufe wird für den Nachtbetrieb empfohlen.
1918
Sicherheitsbestimmungen
Bei den Luftreinigern Blueair 405 und 480i handelt es sich um Elektrogeräte. Bitte lesen Sie die
Sicherheitshinweise vor Inbetriebnahme durch und treffen Sie die notwendigen Vorkehrungen, um
Brandgefahr, elektrischen Schlag oder Verletzungen zu vermeiden. Die eingeschränkte Blueair-
Garantie gilt nur, wenn das Gerät entsprechend dieser Anweisungen verwendet wird.
WARNUNG: Weist auf eine gefährliche Situation hin, die bei Fortbestehen zum Tod oder
zu schweren Verletzungen führen kann.
ACHTUNG: Weist auf eine gefährliche Situation hin, die die bei Fortbestehen zu leichten
oder mittelschweren Verletzungen führen kann.
Allgemeine Hinweise
WARNUNG: Aus Sicherheitsgründen ist ein beschädigtes Netzkabel vom Hersteller, einer Servicestelle oder einer entsprechenden Fachkraft zu ersetzen.
• Schließen Sie den Blueair Luftreiniger mit dem mitgelieferten geerdeten Netzkabel
direkt an eine geeignete geerdete Steckdose an. (Beachten Sie die Angaben zur
Spannung auf Ihrem Gerät)
• Nehmen Sie keinerlei Änderungen am Netzstecker vor.
Vorgesehener Zweck
ACHTUNG: Kinder müssen beaufsichtigt werden, damit sie mit dem Gerät nicht
spielen.
• Dieses Gerät ist nicht bestimmt für die Verwendung durch Personen (einschließlich
Kinder) mit eingeschränkten physischen, sensorischen oder geistigen Fähigkeiten
bzw. denen es an Erfahrung und Wissen mangelt, es sei denn, dass diese Personen
angemessen beaufsichtigt werden oder eine entsprechende Einweisung in die Benutzung des Gerätes durch eine für ihre Sicherheit zuständige Person erhalten.
Geeignet zur Aufstellung: an einem Ort,
wo die Luft ungehindert angesogen und abgegeben und frei zirkulieren kann
Ungeeignet zur Aufstellung: in der Nähe
von Wärmequellen, z. B. Radiatoren, Herd
oder Ofen.
4 ins
10 cm
Ungeeignet zur Aufstellung: in einem Abstand von weniger als 10 cm von einem anderen Gegenstand.
Ungeeignet zur Aufstellung: in der Nähe
von Nassbereichen, z. B. Badezimmer oder
Waschküche, wo das Gerät mit Wasser in
Kontakt kommen kann.
Do not place the unit directly on or against
soft furnishings such as bedding or linen.
Ungeeignet zur Aufstellung: Außenbereiche.
Schritt 1
Klappen Sie den Deckel hoch und drücken Sie
den Berührungsschalter für die Luftdurchsatzgeschwindigkeit. Wenn das WLAN-Symbol
blinkt, kann der Luftreiniger mit der mobilen
App Blueair Friend gekoppelt werden.
Schritt 2
Laden Sie die mobile App Blueair Friend von Ihrem App-Store (Apple App Store oder Google Play)
auf Ihr Smartphone herunter.
Schritt 3
Verbinden Sie Ihr Gerät mit der mobilen App Blueair Friend. Starten Sie die App und führen Sie die
Anweisungen durch.
Nachdem Sie den Luftreiniger mit der mobilen App Blueair Friend verbunden haben, können Sie
mithilfe der App das Gerät aus der Ferne bedienen und Einstellungen verändern.
Vorbereitung
Luftreiniger verbinden – 480i und 405
Verbinden Sie den Luftreiniger gemäß der nachfolgenden Anleitung mit der mobilen App Blueair Friend.
Die Steuerung aus der Ferne ist nun möglich.
Aufstellungsort
FILTER
Wi-Fi
Blinking
Blinking
AUTO
VOC
PM 2.5
Wi-Fi
FILTER
Klappen Sie den Deckel hoch und drücken Sie den Berührungsschalter für die Luftdurchsatzgeschwindigkeit. Wenn das WLAN-Symbol blinkt, kann der Luftreiniger mit der mobilen App Blueair
Friend gekoppelt werden.
Loading...