Blueair 200 Series Instruction Manual
Blueair
200 Series
User Manual 2
Manual del usuario 8
Guide d’utilisation 14
Blueair 200 Series/Serie/Série
Contents
2 Welcome
3 Getting started
5 Getting the most from your Blueair system
6 Changing the filter
English English
Getting started
General safety instructions
The Blueair 200 Series air purier is an electrical appliance. Please read
the safety instructions before use and take the necessary precautions to
reduce the risk of re, electric shock or injury. The Blueair Limited
Warranty applies only if the unit is used according to these instructions.
7 Filters
Welcome
Thank you for choosing Blueair. Before you start using your Blueair air
purier, take a few minutes to become familiar with the basics.
Filter replacement
Be sure to change your Blueair lter according to the recommended
lter replacement schedule. This helps keep your Blueair air purier
running in top condition. See page 6.
Extend your warranty
Complete and send your warranty card to Blueair today to extend your
limited warranty.
Help keep the planet healthy, too
Blueair air puriers provide maximum improvement of indoor air quality
with minimum impact on the environment. The entire unit can be
recycled.
This appliance is not intended for use by children or other persons
whose physical, sensory or mental capabilities or lack of experience
and knowledge prevents them from using the appliance safely unless
properly supervised.
Children should not be allowed to tamper with the controls or play with
the appliance.
Placement
Place the unit in a location that allows air to circulate freely in, out and
around the unit. The minimum acceptable distance from another object
is 4˝ or 10 cm. Use only genuine Blueair lters. Do not place the unit:
Directly on or against soft furnishings, such as bedding or curtains.
Near sources of heat, such as radiators, fireplaces or ovens.
Near wet areas, such as bathrooms or laundry rooms, where it may come into
contact with water.
Outdoors.
2 Blueair 200 Series Blueair 200 Series 3
English English
Settings*
Plug the cable into a grounded wall outlet and turn on your Blueair unit.
The blue light-emitting diode indicates that the unit is working. Set the
control knob to maximum speed, which is recommended for fast initial
cleaning, daytime use, or very polluted air. After a few minutes, adjust the
control to the desired speed. Minimum speed is generally recommended
for nighttime use.
Care and maintenance
Blueair air puriers feature high quality design, materials and workmanship. To keep your unit in top condition, we recommend routine cleaning.
• Vacuum the air intake grille from the inside when you remove
the lter to replace it.
• Vacuum the small inlets with a soft brush attachment.
• Wipe the exterior of the unit with a soft, clean, damp cloth.
• Never clean with gasoline, chemical solvents or corrosive material
also as these agents may damage the surface.
• Do not allow foreign objects to enter the ventilation or exhaust
openings. This may cause electric shock or damage the unit.
• Do not try to repair or adjust any of the electrical or mechanical
functions on your Blueair unit yourself. Contact your local
dealer or Blueair for warranty information.
How it works
Filtered air leaving the unit from the
exhaust grille is charged with
negative ions. The ions collide with
and charge airborne particles in
the room. When air is drawn into
the unit again, the HEPASilent™
lter traps the charged particles.
Getting the most from
your Blueair system
The Blueair system is easy to use. Make sure your unit is the right size
for your room, and change the lters according to recommended lter
replacement schedule. Remember that, just as air conditioners and
heaters have limits to the volume of air they can cool or heat, every air
purication system has limits to the volume of air it can clean. Follow
these common-sense guidelines.
Close your windows
You wouldn’t throw open your windows on a hot summer day and
expect your air conditioner to work efciently, because you can feel the
hot air coming in and the cool air going out. Even though you can’t see
the contaminated air coming in and the clean air going out, the same
logic applies to your air purier.
Close your doors, too
Just as you might seal off part of your house on a cold winter night to
keep your heater working more efciently, seal off the room in which
your system is working for best results. This is especially important
for people using a Blueair system to ease nighttime asthma or allergy
attacks.
Run your system 24 hours per day
For best results, run your Blueair unit 24 hours a day, 7 days a week.
Round-the-clock operation ensures that a continuous supply of clean,
ltered air constantly circulates throughout the room. Blueair systems
are designed for phenomenally low power usage. In fact, it costs about
the same to power a Blueair air purier as it does to power a single light
bulb, depending on the unit and the operating speed.
* For Blueair E Series units (250E, 450E, 550E, 650E), please refer to the separate sheet included with your unit for instructions on settings.
Blueair 200 Series 54 Blueair 200 Series
English English
Changing the filter
Step 1
Unplug the unit.
Step 3
Slide out the old Blueair filter.
Step 2
Open the door.
Step 4
Vacuum inside the unit with a soft brush
attachment.
Filters
Patented HEPASilent™ technology makes the Blueair 200 Series
incredibly quiet. The unit comes with a HEPASilent™ lter already
installed.
Particle Filter. Includes a particle lter that removes dust, pollen, bacteria,
pet dander, mold spores and other airborne particles. The particle lter
is made of polypropylene, which help mechanically lter out airborne
particles. To maximize lter effectiveness, particles are negatively
charged by the Blueair unit before reaching the lter.
Optional carbon filter. Includes a lter with active carbon to remove
gaseous pollutants such as cigarette and cigar smoke or other VOCs
(volatile organic compounds, including household paints and other
chemicals). You may notice a slight odor from the active carbon when
the lter is rst used; this will quickly dissipate.
For optimal performance, Blueair recommends that you replace
filters every six (6) months.
We offer a convenient Filter Subscription Program in some countries.
Contact your local dealer or Blueair to nd out whether the program is
available to you.
Step 5
Slide in the new Blueair filter.
Step 6
Close the door, plug in the unit and turn
it back on.
IMPORTANT! Use only genuine Blueair lters to ensure proper function
of your unit and to qualify for full warranty coverage.
Customer’s record
The model number and serial number of this product can be found on the bottom of the unit.
Please note them in the space provided below and keep for future reference.
Model number Dealer’s name
Serial number Dealer’s address
Date of purchase Telephone number
6 Blueair 200 Series Blueair 200 Series 7
Loading...