NEO USER
MANUAL
Table of Contents
1 GET STARTED ............................................................. 2
1.1 SIM CARD INFORMATION ............................................... 2
1.2 INSTALL AND CHARGE THE PHONE .................................. 2
1.3 FOR YOUR SAFETY ........................................................ 2
2 FUNCTION MENU .......................................................... 4
2.1 FILE MANAGER .............................................................. 4
2.2 PHONEBOOK .................................................................. 4
2.3 USER PROFILES ............................................................. 4
2.4 SETTINGS ...................................................................... 4
2.5 CALL HISTORY ............................................................... 7
2.6 DAILER ......................................................................... 8
2.7 MESSAGES .................................................................... 8
2.8 CONNECTIVITY ............................................................ 10
2.9 MULTIMEDIA ............................................................... 10
2.10 TOOLS ....................................................................... 12
2.11 INTERNET SERVICE ..................................................... 13
2.12 BLUETOOTH .............................................................. 14
2.13 SERVICES .................................................................. 14
1
1 Get started
1.1 SIM card information
When you subscribe to a cellular network, you receive a
plug-in SIM (Subscriber Identity Module) card loaded with
your subscription details, such as your PIN, and available
optional services.
1.2 Install and charge the phone
Remove the battery cover and the battery
If the phone is already on, first turn it off by
pressing and holding on/off key.
Insert the SIM card.
Make sure that the gold-colored contacts on the
card are face down
Install the battery.
Replace the battery cover.
Plug the charger into the phone
Plug the charger into a standard AC wall outlet.
When the phone is completely charged (the battery
icon becomes still), unplug the charger from the
power outlet.
Remove the charger from the phone.
Switch the Phone On/Off.
Enter Your Pin (Access Codes is 1234) if it is
necessary.
Dial the Phone Number Required.
1.3 For Your Safety
Please read these safety guidelines before using your
mobile phone to assure the safe and proper use of the phone.
Switch off the phone when refueling.
2
3
Switch off in an aircraft.
Keep your phone dry.
Keep your phone away from small children and
pets.
Do not store the phone in hot areas.
Do not store the phone in cold areas.
Do not drop, knock or shake the phone.
Do not put the phone in or on heating devices, such
as a microwave oven, stove or radiator. The phone
may explode when overheated.
If your phone has a flash or light, do not use it too
close to the eyes.
Use only the supplied or an approved replacement
antenna.
Do not attempt to open the phone’s casing.
If the phone or any of its accessories are not
working properly, take them to your nearest
qualified service center.
Using the earpieces or stereo headset for extended
time can cause a serious damage to your hearing.
Do not use the phone while charging the phone.
Extreme heat or cold ：Avoid temperatures below
-10°C/14°F or above 40°C/104°F.
4
2 Function Menu
2.1 File manager
Use this menu to view the stored files in the phone or
the micro SD card. In the main menu interface, click “File
Manager” to enter this submenu, menu display Phone and
“Memory Card：\”( if the Memory card have insert into the
mobile-phone).
2.2 Phonebook
You can fast locate the number of the person you want
to contact. Please enter the initial letter of the person’s name,
and related records about it will display in the middle of the
screen. You can locate your records, and then you can view,
send SMS/MMS, call, edit, delete, copy, move and so on.
2.3 User Profiles
Your mobile phone provides many different user
profiles (General, Silent, Meeting, Outdoor, My style) for you
to set your mobile phone’s ring tone according to case and
environments.
Select the needful profile, and then press the “Option”:
Activate: to activate selecting profile.
Customize: to set the selected mode.
2.4 Settings
2.4.1 Dual SIM switch
You can select two kinds of mode to switch SIM:
Manually and Automatically.
5
2.4.2 Dual SIM settings
You can select three kinds of mode: Dual SIM open,
only SIM1 open, Only SIM2 open.
2.4.3 Pen calibration
You can click screen to calibrat the phone.
2.4.4 Phone Settings
You can configure the following options as desired:
Time and Date, Schedule power on/off, Language, Pref. input
method, Encoding, Wallpaper, Screen saver, Power on/off
display, Auto update of date and time, Flight mode, UART
settings, LCD backlight.
2.4.5 Network Setup
2.4.5.1 Network Selection
Set Network selection mode to Automatic or Manual.
2.4.6 Security Settings
This function provides you with related settings about
safety use.
2.4.6.1 SIM Lock
The PIN number can prevent the illegal use of your SIM
card.
2.4.6.2 Phone securuty
The Phone Lock can prevent the unauthorized use of
your mobile phone.
Attention: The default phone lock code is 1122.
6
2.4.6.3 Auto keypad lock
You can set auto keypad on or off.
2.4.7 Call Settings
◆ SIM1/SIM2 Call Setting
Call waiting: To enable call waiting function.
Call divert: To set the call condition by which calls are
diverted to another number.
Call Barring: Allows you to restrict incoming calls and
outgoing calls from your phone.
Line switch (Line1/ Line2): This is a network service to
select phone line 1 or 2, which is the subscriber
number for making calls within ALS Setting
submenu.
Group list
◆ Advance settings
Blacklist: To filter and block incoming calls.
Whitelist: Can add white list telephone number or IP
address, or dialogue list records do edit, delete action.
Auto redial: This option allow you set redial
automatically when the call receiver is busy.
IP dial: you can dial IP call.
Background sound: Set background sound when you
are calling.
Call time display: Set the phone to display the call time.
Call time reminder: You can set the call time reminder.
Auto quick end: Set to end the call automatically.
Reject by SMS: When you have incoming call you can
reject call and meanwhile send SMS by activate this
function.
7
Connect notice
Answer mode: you can select answer mode when
receive incoming call.
2.4.8 Restore Factory Settings
You can restore the relevant settings to the
manufacturer’s settings. The initial password is “1122”.
2.4.9 Sound Effects
You can change: Normal Bass Dance Classical Treble
Party Pop Rock Effect.
2.5 Call history
◆ SIM1/SIM2 call history
All calls: Displays all call logs.
Missed calls: Displays the most recent received calls
that you did not answer.
Dialed calls: Displays the most recent calls you have
dialed.
Received calls: Displays the most recent calls you have
received.
Delete call logs.
Call timers: Press the “Ok” to enter “Call Timers”
submenu, can look over call time record up to now.
Call cost: Press the “Ok” to enter “Call Cost” submenu,
can look over call cost record up to now.
Text msg. counter: To view the current SMS counter,
include the two options: “Sent” and “Received”. Press
“Reset” to clear.
GPRS counter: Enter this submenu to view the
quantity of data flow transmitted on the network via
8
GPRS. This includes viewing the Last Sent, Last
Received, All Sent or All Received data flow quantity.
You can also reset it to zero by the Reset Counter.
2.6 Dailer
Click the Dailer to dial the number and then press dial key
to make a telephone call to the people who you want to call.
2.7 Messages
2.7.1 Write message
Use this menu to create and send a message (SMS or
MMS). The SMS/MMS function is dependent on the network
service and your network may or may not support the service.
Please confirm in writing short message has been properly set
before the information center number.
2.7.2 Inbox
Inbox/Conversations deposit received all text messaging
and MMS.
2.7.3 Drafts
After editing of information, information will select
save to draft box location.
2.7.4 Outbox
In sending messages, select save and send when after
the failure, and transmit information will be stored in boxes.
2.7.5 Sent messages
In sending messages, select save and send and the news
will save to transmit information.
9
2.7.6 Achive
You can move the message from Inbox to Archive to
archive.
2.7.7 Delete messages
You can choose delete inbox, draft, out boxes, already
issued information, folders and all the information for the
corresponding delete action.
2.7.8 Broadcast message
This network service allows you to receive the
broadcast messages on various topics such as weather, traffic,
local district code, local hospitals, taxis or pharmacy in your
area. For more information about broadcast message topics,
please contact your service provider.
2.7.9 Templates
Information list that phrase for the selected edit, delete,
template create new short message from template operation.
2.7.10 Message settings
Text message setting
Within the message settings sub-menu, you can define
default values on common parameters for mobile-originated
messages.
Multimedia Message settings
Within the message settings sub-menu, you can define
default values on common parameters for mobile-originated
messages.
Service Message
Enable push: According to Enable choose accept all,
10
accept authenticated or trusted, Disable.
Enable service loading: According to Enable service
loading choose Prompt, Auto launch, Disable.
2.8 Connectivity
Data account
This menu allows you to change the settings for the
GSM and GPRS network services. For further details, contact
your service provider.
2.9 Multimedia
2.9.1 Camera
Camera Settings
Presses the “Option”, can select the operation as follows:
Album: You may view the photos in this menu.
Camera settings: To set some relative spec.
Image settings: You may set image size and quality.
White balance: You may set the balance of light.
Scene Mode: To take photos with different scene.
Effect Settings: To set special shot effect
Storage: To set the default storage path.
Restore default: To restore to the camera’s default
settings.
2.9.2 Image viwer
You can convenient look over the photos list.
2.9.3 Video recorder
In preview window of the video, press the “setting”,
you can put up operation as follows:
Video recorder settings: To set some spec of the video
11
recorder.
Video settings: You can set the video quality.
White balance: You may set the balance of light.
Effect Settings: To set special shot effect
Storage: To set the default storage path.
Restore default: To restore to the video player’s default
settings
2.9.4 Video Player
Press the “Option”, can select the operation as follows:
Play to play the current movies.
Forward to select To Phonebook, To
Screen Saver.
Rename to reedit the current movies name.
Delete to delete the current movies.
Delete All Files to delete the all movies.
Sort to array all movies.
Storage to select storage.
2.9.5 Audio Player
In the Audio Player menu interface, In the Audio
Player menu interface, press the “List” to display the play list
of music, press the “Option”, can Play the current music,
look over Detail message of music, Refresh List and
Settings the attribute about the Audio Player.
2.9.6 Sound recorder
You can record sound in AMR, WAV format and use it
as ring tone, MMS attachment and so on.
2.9.7 FM Radio
In the FM Radio menu interface, press “Option”
12
Channel list: to save and edit the auto-search result;
Manual input: manually enter the figure of the channel
you want to start exact search;
Auto search: auto search channels.
Settings: to set Background Play and Loud Speaker.
2.10 Tools
2. 10.1 Calendar
Enter Calendar submenu, screen will display the
current month, click date to change date.
You can enter “Add Event” menu to add and edit
routing, and then you can view, view all, add event, and jump
to date and so on.
2. 10.2 Tasks
This feature lists out all your tasks you have added. You
can also view, add, edit, delete, delete overdue, delete all,
jump to date, send Vcalendar and save as file as desired.
2. 10.3 Alarm
The mobile-phone can set five alarms at most, and hold
out the alarm when the phone is power off.
2. 10.4 World Clock
Enter World Clock submenu, display world time zone
map, move coordinate location by the left/right icon, the
interface will show the city time located by the coordinate.
2. 10.5 Notes
Enter Notes submenu, can add some contents should
be recorded, and can add the note content after being an editor,
13
delete operation.
2. 10.6 Calculator
Your mobile phone provides a calculator with 4 basic
functions to facilitate simple calculations.
2. 10.7 Unit converter
Enter Unit converter submenu, first choose conversion
unit, implement the length and the length, width and breadth
of the conversion between.
2. 10.8Currency converter
Enter Currency converter submenu, first input Rate,
and press the “OK” to enter. Press the “OK”, conversion
result will display in the other frame.
2. 10.9 Stopwatch
Start Split Timing, and then select “View record” to
see timing records.
2. 10.10 Ebook reader
Enter Ebook read submenu, cn read suffix expansion.
TXT electronic document called to document name can make
changes and display decoding way.
2.11 Internet service
Your mobile phone supports wireless application
protocol (WAP) service. You can access many different WAP
services such as news, weather reports, flight information, and
others. These services are especially designed for mobile
phones and maintained by WAP service providers.
14
2.12 Bluetooth
You may establish wireless connection with other
compatible devices with the Bluetooth technology; you may
send music files and etc. with the Bluetooth technology; and
you may establish wireless connection with compatible PC, in
addition to establish communication via the connected
compatible Bluetooth earphone.
2.13 Services
STK*
Press the left soft key to enter the “STK” main menu.
Here you can use the value-added services provided by your
network operator.
Loading...