Phone Specifications
Dimensions (W×D×H): 101mm*45mm*14mm
Lithium battery
Rated capacity: 3.7V 600mAh
Continuous standby duration: (Relates to network status) 160-200 hours
Continuous conversation duration: (Relates to network status) 3-4 hours
Please refer to their labels for other data related to the battery and the charger
-0-
1 Phone overview
-1-
2 Getting started
2.1 Installing the SIM Cards
An SIM card carries useful information, inc luding your m obile phone number, PIN (Personal Identif ication
Number), PUK (PIN Unlocking Key), IMSI (Inter national Mobile S ubscriber Identit y), network inform ation,
contacts data, and short messages data.
1) Remove the back cover.
2) Lift the battery away.
3) Insert the SI M card into the SIM card slot lightly with t h e c orner c ut tin g of th e c ar d ali gn ing to the notch
of the slot and the gold plate of the card facing download, till the SIM card cannot be further pushed in.
4) With the metallic contacts of the battery facing the metallic contacts in the battery slot, press the battery
down until it locks into place，then fix its back cover.
-2-
2.2 Linking to the Network
After the SIM card and the mobile phone are succ essfully unlocked, the mobile phone automatically
searches for an available network.
3 Input method
This mobile phone provides multip le inpu t methods, i ncludi ng Englis h input in both upp er and lo wer case ,
smart English input and numeric input method.
3.1 To Shift Entry Methods
Press # key to switch between input methods.
3.2 Numeric and English Input
Numeric input: You can input numbers with the numeric input method. Press a number key to input the
corresponding number.
English input: Each key is used to represent multiple characters. Quickly and continuously press a key till
the character you want appears. Input the next character after the cursor moves.
3.3 Inserting a Symbol
Press the * key to enter the Symbol interface and select a symbol you want.
4 Using the Menus
4.1 Contacts
The mobile phone can store up to 100 telephone numbers.
4.2 Multimedia
Camera: Use this function to capture pictures.
Audio player: Use this function to play audio files. I n aud io player interface, you can press * ke y and #
-3-
key to tune volume.
Video player: You can use this function to play video files.
Video recorder: This function enables you to record dynamic pictures. You can press OK key to
capture video clips; left soft key to access Options; right soft key to exit capture interface.
Sound recorder: You can record AMR & WAV format audio files through this function.
FM radio: You need to insert earphone into its corresponding jack before using this function.
4.3 File manager
The phone supports the memory card. You can use the file manager to convenientl y manage various
directories and files on the memory card.
4.4 Call logs
Through this function, you can view a list of missed calls, dialed calls and received calls etc.
4.5 Messages
If the short message memory is full, a blinking message icon appears on the top of the screen. To normally
receive short messages, you need to delete some of the existing short messages.
4.6 Games
A game named F1 Race is embedded in the phone. For specif ic operatio n, pleas e refer to ‘h elp’ option of
the game.
4.7 Organizer
Stopwatch: Stopwatch is simple applic ation for measuring time with possibility to register several
results and suspend/resume measurement.
Torch: You can use this function to tur n on/off the tor ch which s ituates a t the top of the phone. In id le
screen, you can long press OK key to turn on/off the torch.
Calendar: Once you enter this menu, ther e is a monthly-view calendar for you to keep trac k of
important appointments, etc.
To do list: This function enables you to create new memos.
Alarm: Through this function can you set Alarm status, time, alarm tone, etc.
World clock:
Calculator:
Access this menu to view time of main cities in various time zones.
The calculator can add, subtract, multiply and divide.
-4-
4.8 Profiles
The mobile phone provides multiple user profiles, including General, Meeting, Outdoor, Indoor and
Headset.
4.9 Settings
STK
STK service is the tool kit of SIM card. This phone supports the service f unction .The specific items are
depended by SIM card and network. Service m enu will be aut o add ed to t he phone menu when supported
by network and SIM card.
Date and time
You can set time and date through this function.
Display
Through this function，you can set wallpaper, LCD backlight, brightness, etc..
Phone settings
Language: Select the display language for the mobile phone.
Greeting text: Through this function, you can set greeting text content & status.
Home city: Select a city as home city.
Auto keypad lock: Once turned on, you m obile will be locked automatically if you per formed no
operations during a long period. Or you can press left soft key then * key to lock/unlock keypad.
Input method settings: Set writing language and input method through this function.
Call settings
Caller ID: You can select the ID set by the network, hide the ID, or send the ID. By default, the ID set by
the network is chosen.
Call waiting: Network dependent
Call divert: This network function enables you to forward i ncoming calls t o another num ber you have
previously specified.
Call barring: The call barring function enables you to bar ca lls as n eeded. W hen s etting th is functi on,
you need to use a network barring code, which can be obtained from the network operator.
-5-
Closed user group: This function requires network supp ort. For details, consult the local network
operator. Note: SIM on service is required.
Common call settings
Call time reminder: To set single or periodic tone in a call to make you know the time.
Auto re di al : Set it to On or Off to enable or disable auto redial. To end the auto redial process, press
the End key.
IP number: Activate/deactivate the IP dial function and add/edit IP numbers.
Black list: He or she can’t call you if you set the b lacklist status to on and add his or her number to
blacklist.
Answer mode: Once select any key; you can press any key except the end key to answer an incoming
call.
Network settings
Through this function, you can select network and set preferred network.
Network status
Through this function, you can check network status.
Security settings
This function provides you with related settings about safety use. The initial phone lock code is set to 1122
by the manufacturer.
Set UART
Select SIM1 or SIM2 as per your need.
Restore factory settings
Use this function to restore factory settings. Note: The initial phone lock code is 1122.
FCC Regulations:
This mobile phone has been tes ted and found to comply with the lim its for a Class B digital device,
pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonabl e protection
against harmful interference in a residential installation. This equipment gener ates, uses and can
radiated radio frequency energy an d, if not ins talled an d used in ac cord ance with t he ins tructi ons, m a y
cause harmful interference to rad io comm unications. Ho wever, there is no guarant ee that in terferenc e
-6-
will not occur in a particular installation If this equipment does cause harmful interference to rad io or
television reception, which can be determined by turning the equipment off and on, t he user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the part y responsible for compliance c ould void
the user‘s authority to operate the equipment.
4RF Exposure Information (SAR)
This mobile phone meets the government’s requirements for exposure to radio waves.
This phone is designed and manufactured n ot to exceed the emission limits for exposur e to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless mobile ph ones employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W /kg. *Tests for SAR are
conducted using standard operating positio ns accepted by the FCC with the phone transm itting at its
highest certified power level in all tested frequency bands. Although the SAR is d etermined at the
highest certified power level, the actual SAR l evel of the phone while o perating can be well below the
maximum value. This is because the phone is des igned to operate at multiple power levels so as to
use only the poser required to reach the network . In general, t he closer you are to a wireless bas e
station antenna, the lower the power output.
The highes t SAR value for the m odel phone as report ed to the FCC when teste d for use at the ear is
-7-
0.869 W/kg and when worn on the body, as described in this user guide, is 0.332 W/kg (Body-wor n
measurements differ among phone models, depending upon available accessories and FCC
requirements.)
While there may be differ ences between the SAR levels of various phones and at var ious positions,
they all meet the government requirement.
The FCC has granted an Equipment Authori zation for this model phon e with all reported S AR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR infor mation on this model
phone is on file with the FCC and can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on FCC ID: YHLBLUCLICKLITE.
For bod y worn operation, t his phone has been tested and m eets the FCC RF exposur e guidelines f or
use with an accessory that contains no m etal an d the posit ions the hands et a m inim um of 1.5 cm fr om
the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If
you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a
minimum of 1.5 cm from your body when the phone is switched on.
-8-
Loading...