BLOOMFIELD INDUSTRIES
2 ERIK CIRCLE, P. O. Box 280
Verdi, NV 89439
Customer Service (775) 345-0444 Ext.502
fax: (775) 345-0569
www.wellsbloomfield.com
®
SDS-5SB Satellite Docking Station
805
Shown with optional drip tray
part no. 3905
OWNERS MANUAL
Includes
OPERATING INSTRUCTIONS
EXPLODED VIEW & PARTS LIST
INSTALLATION INSTRUCTIONS
CLEANING INSTRUCTIONS
SPECIFICATIONS
AGENCY APPROVALS
p/n 75186 Rev. (-) Op 805 030701 cps
WARRANTY STATEMENT
All electrical equipment manufactured by BLOOMFIELD
INDUSTRIES is warranted against defects in material and
workmanship for a period of one year from original purchase
or eighteen months from the date of shipment from our
factory, whichever comes first, and is for the benefit of the
original purchaser, except that; airpots carry a 30 day
warranty only; dispensers i.e. tea and coffee carry a 90 day
warranty; and, decanters are excluded.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING, BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, AND/OR INDIRECT OR CONSEQUENTIAL
DAMAGES IN CONNECTION WITH BLOOMFIELD
PRODUCTS.
This warranty is void if it is determined upon inspection by an
Authorized Service Agency that the equipment has been
modified, misused, misapplied, improperly installed, or
damaged in transit or by fire, flood or act of God.
It also does not apply if the serial nameplate has been
removed or service is performed by unauthorized personnel.
SERVICE POLICY AND PROCEDURE GUIDE
ADDITIONAL WARRANTY EXCLUSIONS
1. Resetting of safety thermostats, circuit breakers,
overload protectors, or fuse replacements unless warranted
conditions are the cause.
2. All problems due to operation at voltages other than
specified on equipment nameplates—conversion to correct
voltage must be the customer’s responsibility.
3. All problems due to electrical connections not made in
accordance with electrical code requirements and wiring
diagrams supplied with the equipment.
4. Replacement of items subject to normal wear, to include
such items as knobs and light bulbs. Normal maintenance
functions including adjustment of thermostats, microswitches,
and replacement of fuses and indicating lights are not covered
under warranty.
5. All problems due to inadequate water supply, such as
fluctuating, or high or low water pressure.
6.
All problems due to mineral/calcium deposits, or contamination
from chlorides/chlorines. De-liming is considered a preventative
maintenance function and is not covered by warranty.
The prices charged by Bloomfield Industries for its products
are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to repair of defects without charge by a Bloomfield Industries Authorized Service
Agency or one of its sub-agencies. This service will be
provided on customer’s premises for non-portable models.
Portable models (a device with a cord and plug) must be
taken or shipped to the closest Authorized Service Agency,
transportation charges prepaid for service.
In addition to restrictions contained in this warranty, specific
limitations are detailed in the ADDITIONAL WARRANTY
EXCLUSIONS section. Bloomfield Industries Authorized
Service Agencies are located in principal cities.
This warranty is valid in the United States and void elsewhere.
Please consult your classified telephone directory, your food
service equipment dealer, or, for information and other details
concerning warranty write to:
Service Parts Department
Bloomfield Industries
P. O. Box 280
Verdi, Nevada 89439
(775) 345-0444 fax (775) 345-0569
7. Full use, care and maintenance instructions are supplied
with each machine. Those miscellaneous adjustments noted
are customer responsibility. Proper attention will prolong the
life of the machine.
8. Travel mileage is limited to sixty (60) miles from an
authorized Service Agency or one of its sub-agencies.
9. All labor shall be performed during normal working hours.
Overtime premium shall be charged to the customer.
10.
All genuine Bloomfield replacement parts are warranted for
ninety (90) days from date of purchase on non-warranted equipment.
Any use of non-genuine Bloomfield parts completely
voids any warranty.
11. Installation, labor and job check-out are not considered
warranty.
12. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technicians ability to perform
services are not covered by warranty. This includes institutional
and correctional facilities.
SHIPPING DAMAGE CLAIMS PROCEDURE
NOTE: For your protection, please note that equipment in
this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory. Upon acceptance of this shipment, the transportation company assumes
full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill
or express receipt, and that the note of loss or damage
is signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
must be done within fifteen (15) days from the date the
delivery was made to you. Be sure to retain the
container for inspection.
Bloomfield Industries cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
xi
TABLE OF CONTENTS
WARRANTY STATEMENT xi
Features & Operating Controls 2
General Information & Precautions 4
Specifications (General Layout Data) 5
Installation Instructions 6
Operating instructions 8
Cleaning Instructions 9
Wiring Diagram 10
Exploded View & Parts List 11
Ordering Information / Service Procedure 12
INTRODUCTION
Thank You for purchasing this Bloomfield Industries Satellite Docking Station. The designed-in
flexibility of this Satellite Docking Station will allow you to meet a wide spectrum of customer needs.
Proper installation, professional operation and consistent maintenance of this appliance will ensure
that it gives you the very best performance and a long, economical service life. You will achieve
maximum performance from this unit if you familiarize yourself with its many outstanding features.
Safe and satisfactory operation of this Satellite Docking Station depends to a large extent upon
proper installation. This Satellite Docking Station must be installed without alteration, and in
accordance with these printed instructions and with applicable electrical codes. The performance of
this Docking Station can be greatly impaired if it is altered in any way, or if the installation deviates
from the instructions given herein. Please be certain that electrical connections are compatible, as
connection to improper voltage could damage the unit and void the warranty.
If you have any difficulties with the Docking Station, contact your nearest Bloomfield Authorized
Distributor. They have the necessary expertise to provide advice and assistance. If the Bloomfield
Distributor is unable to help you, please contact the factory directly
This manual contains the information needed to properly install, use and care for the Docking Station
in a manner which will ensure its optimum performance.
1
FEATURES AND OPERATING CONTROLS
(
DOCKING STATION
INDICATOR LIGHT
CONNECTOR
POWER
CORD
OPTIONAL
SATELLITE
(in place)
ADJUSTABLE LEGS
OPTIONAL SATELLITE
HANDLES
CONNECTOR
Fig 1. Satellite Docking Station Features & Operating Controls
DRIP TRAY
optional)
2
FEATURES AND OPERATING CONTROLS (continued)
Docking Station
Adjustable Legs
Connector
Indicator Light
Nameplate
(on back - not shown)
Power Cord
(Optional) Satellite
Connector
Handles
(Optional) Drip Tray
Allows brewer to be leveled. Also allow clearance for cleaning
underneath brewer.
Connects to satellite. Allows satellite heater to be energized.
Allows brewer to sense that a satellite is in place.
Glows when a satellite is properly installed at that station.
Lists manufacturer, model and serial number.
Also lists voltage and wattage rating of brewer.
Allows docking station to be connected to electrical power.
Connects to docking station connector. Allows heater to be
energized. Allows docking station to sense that a satellite is in
place.
Allow the satellite to be safely carried.
Optional drip tray catches drips and spills from serving faucet.
Easily removed for cleaning.
Model SDS-5SB Satellite Docking Station manufactured by Bloomfield Industries, Inc. is designed to
hold coffee at a correct temperature for serving.
Operates on 120 volts, 2.0 Amps, 225 Watt service.
Safety features include the absence of any hot surfaces.
Ideal for self-service applications.
Automatic safety shut-off of electrical power to the satellite connector when a satellite is removed.
Adjustable legs with non-skid feet for easy leveling.
Teflon color coded wiring, keyed to color tabs at connection points.
V V listed under E9523. Meets N Standard 4.
Satellite brewer and satellites optional.
Optional drip trays.
3
GENERAL INFORMATION AND PRECAUTIONS
WARNING:
Electric
Shock hazard
All servicing requiring
access to non-insulated
electrical components
must be performed by a
factory authorized
technician.
DO NOT open any
access panel which
requires the use of tools.
Failure to follow this
warning can result in
severe electrical shock.
CAUTION:
Burn Hazard
Coffee is extremely hot.
Use care when installing
satellites to avoid spills
or splashing.
Hot coffee can cause
skin burns on contact.
This appliance is intended for use in commercial establishments
only.
This appliance is intended
beverage for human consumption, and to maintain said beverage at
serving temperature. No other use is
the manufacturer or its agents.
Operators of this appliance must be familiar with the appliance use,
limitations and associated restrictions. Operating instructions must be
read and understood by all persons using or installing this appliance.
Cleanliness of this appliance is essential to good sanitation. Read and
follow all included cleaning instructions and schedules to ensure the
safety of the food product.
Surfaces of satellites may be hot to the touch, and may cause burns on
contact.
Disconnect the docking station from electrical power before performing
any maintenance or servicing.
DO NOT submerge satellites in water.
DO NOT splash or pour
water over, onto or into any controls, control panel or wiring.
Any procedure which requires the use of tools must be performed by a
qualified technician.
This manual is considered to be a permanent part of the appliance.
This manual and all supplied instructions, diagrams, schematics, parts
breakdown illustrations, notices and labels must remain with the
appliance if it is sold or moved to another location.
This appliance is made in the USA. Unless otherwise noted, this
appliance has American sizes on all hardware.
to hold specific containers of hot
recommended or authorized by
4
GENERAL LAYOUT DATA
BLOOMFIELD SATELLITE DOCKING STATION
MODEL: SD S-5SB
SPECIFICATIONS
E9253
8 11/16
221 MM
E9253
STD 4
17 9/16
446 MM
OPTIONAL
SATELLITES
16 1/16
408 MM
LINE CORD
46 3/4
118 8 MM
OPTIONAL
DRIP TRAYS
11 7 / 8
302 MM
16 3/32
409 MM
ELECTRICAL SPECIFICATIONS
MODEL
SDS-5SB
WATTS
225 (wit h five Sat elli tes)
5 3/8
137 MM
6 7/16
164 MM
22 7/32
564 MM
VOLTS
120
AMPS
2.0
5
INSTALLATION
CAUTION: DO NOT connect or energize this appliance until all Installation
Instructions are read and followed. Damage to the dispenser will occur if these instructions
are not followed.
WARNING: All installation procedures must be performed by a qualified
technician with full knowledge of all applicable electrical and plumbing codes. Failure could
result in property damage and personal injury.
WARNING: All procedures requiring access to non-insulated components must
be performed by a qualified service technician.
NOTE:
To enable the installer to make
a quality installation and to minimize installation time, these
tests and suggestions should be
completed before the actual
installation is begun.
CAUTION: Hazard
from Unstable
Equipment
Rubber feet must be installed
on each leg of the brewer. Legs
must be adjusted so that all four
feet rest firmly on the counter.
Failure to properly install the
feet can result in movement of
the brewer, which can cause
personal injury and/or damage
to the brewer.
INSTALL LEGS
The brewer is provided with adjustable legs and rubber feet. Be
sure the legs are securely screwed into the base of the brewer,
and that the rubber feet are properly installed.
LEVEL THE UNIT
The adjustable legs allow the brewer to be leveled. Set the
brewer in its ultimate operating location and check for level with a
spirit level Adjust the brewer for level from front-to-rear, and from
side-to-side. Be sure all four feet rest firmly on the counter.
SCREW INTO
BREWER
FRAME
ADJUST
FOR
HEIGHT
Fig. 2 Adjustable Leg
6
ATTACH
RUBBER
FEET
INSTALLATION (continued)
ELECTRICAL INSTALLATION INSTRUCTIONS
This unit requires a power source capable of supplying
120 Volts AC, 50/60 Hz, 3-Wire 15 Amp.
The unit is shipped from the factory with a power cord.
The power cord must be plugged into a properly grounded
NEMA 5-15P receptacle.
INITIAL SET-UP INSTRUCTIONS
Remove all satellites from the docking station. Plug power cord
into an appropriate 120 volt receptacle.
Install a satellite in docking position #1. When properly installed,
the indicator light will glow.
NOTE: For units equipped with quality timers, there will be a
slight delay before the indicator light glows.
Repeat indicator check for positions #2 thru #5.
Docking station is ready for service.
CAUTION:
Electric Shock
Hazard
The ground prong of the
electrical plug is part of a
system designed to protect
you in the event of equipment
damage. Never cut off the
large prong of the plug, nor
twist a blade to fit an existing
receptacle. Contact an
electrician to install the
proper electrical circuit and
receptacle.
IMPORTANT:
Initial set-up must be performed
by a qualified installer or
qualified service technician.
Improper set-up will damage the
brewer and void the warranty.
IMPORTANT:
DO NOT CONNECT POWER
TO DOCKING STATION WITH
SATELLITES IN PLACE.
7
OPERATING INSTRUCTIONS
IMPORTANT:
HANDLES
GETTING STARTED
Check the docking station:
Check that the brewer is clean and the drip tray (if used)
is empty.
Check that the docking station is plugged into an appropriate
receptacle.
DAILY START-UP
Install satellites in any or all of the five positions of the docking
station. When the satellite is properly installed, the connector of
the satellite will be fully seated in the connector of the docking
station, and the indicator light for that docking position will glow.
Fig. 2 Satellite Handles
DO NOT remove the satellite
from the docking station by the
sight glass. Always manipulate
and carry the satellite by the
handles at the top of the
CONNECTOR
Fig. 3 Satellite Connector
8
CLEANING INSTRUCTIONS
PROCEDURE: Clean Satellite Docking Station
PRECAUTIONS: Unplug docking station
Remove satellites
FREQUENCY: Daily
TOOLS: Mild Detergent, Clean Soft Cloth or Sponge
1. Unplug docking station from electrical power.
2. Remove satellites.
3. Remove and drain the drip tray. Rinse in a sink under warm
running water. Allow to air dry, then reinstall on brewer.
4. Wipe exterior of docking station with a soft clean cloth
or sponge moistened with clean water.
5. Reinstall satellites.
Procedure is complete
CAUTION:
Burn Hazard
Serving temperatures of
coffee is extremely hot.
Hot coffee will cause
serious skin burns.
WARNING:
Electric
Shock
Hazard
DO NOT immerse or
submerge satellites. Fluid
may saturate the insulation
and short-circuit the receptacle connectors.
Electric shock may cause
injury and property
damage.
IMPORTANT:
DO NOT use steel wool sharp
objects, or caustic, abrasive or
chlorinated cleansers to clean
the docking station or satellites.
9
WIRING DIAGRAM
CONNECTO R WIRED
ASSY
CONNECTO R WIRED
ASSY
CONNECTO R WIRED
ASSY
WHITE
GREEN
BLACK
BLACK
BLACK
WHITE
GREEN
BLACK
BLACK
BLACK
WHITE
GREEN
BLACK
BLACK
BLACK
PILOT LIGHT
CONNECTOR
#5
#1#2#3
#4
1
RED
PILOT LIG HT
CONNECTOR
#4
#1#2#3
#4
1
RED
PILOT LIGHT
CONNECTOR
#3
#1#2#3
#4
1
RED
MODEL: VOLTS:
SDS-5SB
120
CONNECTO R WIRED
ASSY
3
4
BLACK
GREEN
CONNECTO R WIRED
ASSY
CORD ASSY
GROUND
WATTS:
220 W (USE WITH [5] SATELLITES)
10
WHITE
GREEN
BLACK
BLACK
BLACK
WHITE
GREEN
BLACK
BLACK
BLACK
PILOT LIGHT
CONNECTOR
#2
#1#2#3
#4
CONNECTOR
#1
#1#2#3
#4
1
RED
2
WHITE
2
WHITE
1
RED
EXPLODED VIEW & PARTS LIST
5
2
8
15
7
6
12
9
14
13
1
3
4
75177 WELD ASSY BODY
75176 ASSY TOP HOUSING
75180
75175
75182
75181
6407-15
35-210
83105
83107
83098
83077
83046
75185
84784
WELD A SSY BASE
WELD ASSY BOTTOM PLATE
LID
BACK PANEL
CORD ASSY
STRAIN RELIEF
SWITCH WITH SCREWS
FEET, RUBBER , BLACK
LEG, 4" BLACK, W/FLANGED FOOT
HANDLE GUIDE "L"
CONNECT OR ASSY
LABEL, BASE
ASSY LIGHT GREEN 250V
11
10
1
1
1
1
1
1
1
1
1
4
4
6
5
1
5
11
ACCESSORIES (not shown)
SERVICE # DESCRIPTION
3901 DRIP TRAY 1
3903 DRIP TRAY, SDS-5 1
EXPLODED VIEW & PARTS LIST
(MODEL: SDS-5SB)
QTY.
ORDERING / SERVICE PROCEDURES
t
Parts are available at your Authorized Bloomfield Service Agency. Locations and phone
follows:
1.
2.
11)& 9 (Pages
his in parts replacement Bloomfield genuine only Use
warranty.the voids Bloomfield by supplied those than other parts
equipment.all with provided Listing Agency the in listed are numbers
manual.this of function and identification parts the in
replacementof use The brewer.
needed.parts the identify to manual this in located views exploded the to Refer
followingthe record known, are needed parts the Once - Information Ordering
andUnit the of side the on Plate Name Identification the from information
Parts Identification Section on pages (10 & 12).
Model:
Serial Number:
Part No. Description Qty
How to order - For immediate shipment, call your local BLOOMFIELD INDUSTRIES
Authorized Service Agency.
asproceed brewer, coffee the to operation proper restore to required parts the find To
numberpart corresponding the locate to view exploded the from number item the Use
QtyDescriptionPart No.
Service Information - To obtain service assistance in addition to that contained in this
chapter, call BLOOMFIELD in the U.S. at (775) 345-0444 or email at
service@wellsbloofield.com.
Be prepared to give the model and serial numbers of your brewer, as well as the
problem and the troubleshooting steps already taken, to the service technician when
calling for assistance.
12
PARTS AND SERVICE
For best results, use only genuine Bloomfield paper
filters in this brewer.
IMPORTANT: Use only factory authorized service
parts.
For factory authorized service, or to order factory
authorized replacement parts, contact your Authorized
Bloomfield Distributor, or call:
Bloomfield Industries Co.
2 Erik Circle
P. O. Box 280
Verdi, NV 89439
phone: (775) 345-0444 fax: (888) 492-2783
(Service Parts Dept.)
Service Parts Department can supply you with the
name and telephone number of the AUTHORIZED
BLOOMFIELD DISTRIBUTOR nearest you.
11 13
Bloomfield Industries, Inc.
PO. Box 280 Verdi, NV. 89439
Ph. 775/345-0444 Fax 888/492-2783
Service: 1-888/492-2783
website: www.wellsbloomfield.com
Bloomfield Industries Canada Limited
5850 Keaton Cresent
Mississauga, Ontario, Canada L5R 3K2
Ph. 905/507-1700 Fax 905/507-1777
Toll Free 1-877-507-1700
website: www.bloomcan.com
e-mail: brewinfo@bloomcan.com
Loading...