Bloomfield 8851, 8872, 8852, 8708, 8871 User Manual

WELLS BLOOMFIELD, LLC

2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: [phone]

www.wellsbloomfield.com

fax: [phone]

763

OPERATION MANUAL

For

Hot Plate-Style

Model 8702

Model 8852

Decanter W armer

MODELS

8708 Dual In-Line Warmer

8851 Single Warmer

8852 Dual Warmer

8871 Single Warmer

8872 Dual Warmer

Includes:

Installation
Use & Care

Model 8871

NOTE: All warmers shown with optional 8900-Series
Glass Decanters (available separately).

PRINTED IN CHINA

p/n 77719 Rev. (-) ECN-13409 M763 080124 cps

WARRANTY STATEMENT

Carafe Warmer models 8708, 8851, 8852, 8871
and 8872 manufactured by Wells Bloomfield, LLC
are warranted against defects in material and
workmanship for a period of ninety (90) days from
original purchase
original purchaser.
THIS WARRANTY IS THE COMPLETE AND
ONLY WARRANTY, EXPRESSED OR IMPLIED
IN LAW OR IN FACT, INCLUDING, BUT NOT
LIMIT E D T O , WARRA N T I E S O F
MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE, AND/OR INDIRECT
OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH WELLS BLOOMFIELD
PRODUCTS.

,

and is for the benefit of the

This warranty is void if it is determined upon
inspection by the factory that the equipment has
been modified, misused, misapplied, improperly
installed, or damaged in transit or by fire, flood or
act of God.
It also does not apply if the serial nameplate has
been removed or service is performed by
unauthorized personnel.
This warranty is valid in the United States and
Canada and void elsewhere.
In addition to restrictions contained in this
warranty, specific limitations are detailed in the
ADDITIONAL WARRANTY EXCLUSIONS section.

Please contact:
Bloomfield Service Department for all warranty
claims:
Phone: [phone]
Fax: [phone]

SERVICE POLICY AND PROCEDURE GUIDE

1. All problems due to operation at voltages
other than specified on equipment name
plates-conversion to correct voltage must be
the customer's responsibility.

2. All problems due to electrical connections not
made in accordance with electrical code

Additional Warranty Exclusions

requirements and wiring diagrams supplied
with the equipment.

3. Replacement of items subject to normal wear.
Normal maintenance functions are not
covered under warranty.

4. Proper attention, full care and maintenance
will prolong the life of the machine.

SHIPPING DAMAGE CLAIMS PROCEDURE

SHIPPING DAMAGE CLAIMS PROCEDURE

Note: For your protection, please note that the
equipment in this shipment was carefully inspected
and packaged by skilled personnel before leaving
the factory. Upon acceptance of this shipment, the
transportation company assumes full responsibility
for its safe delivery.

If Shipment arrives damaged:

1. Visible loss or damage: Be certain that any
visible loss or damage is noted on the freight
bill or express receipt, and that the note of
loss or damage is signed by the delivery
person.

2. File claim for damage immediately:
Regardless of the extent of the damage.

3. Concealed loss or damage: if damage is
unnoticed until the merchandise is unpacked,
notify the transportation company or carrier
immediately, and file "Concealed Damage"
claim with them. This must be done within
fifteen (15) days from the date the delivery
was made to you. Be sure to retain the
container for inspection.

Bloomfield Industries cannot assume liability for
damage or loss incurred in transit. We will,
however, at your request, supply you with the
necessary documents to support your claim.

xi

763 p/n 77719 OpManual Decanter Warmers

TABLE OF CONTENTS

WARRANTY STATEMENT xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION INSTRUCTIONS 4
OPERATION 6
BREWING COFFEE 8
CLEANING INSTRUCTIONS 9
TROUBLESHOOTING SUGGESTIONS 10
SERVICING INSTRUCTIONS 11
Deliming Instructions 16
EXPLODED VIEWS & PARTS LISTS 18
SERVICE KITS 22
WIRING DIAGRAMS 23

Thank You for purchasing this
Wells Bloomfield appliance.

Proper installation, professional
operation and consistent
maintenance of this appliance will
ensure that it gives you the very
best performance and a long,
economical service life.

This manual contains the
information needed to properly
install this appliance, and to use,
care for the appliance in a manner
which will ensure its optimum
performance.

SPECIFICATIONS

MODEL STYLE VOLTS 1ø WATTS AMPS POWER SUPPLY CORD

8708
8851

Dual Step-Up 200 1.7 NEMA-5-15P

Single 100 0.8

120 VAC
120 VAC

NEMA-5-15P

8852
8871
8872

Dual 200 1.7

Single 100 0.8

Dual 200 1.7

120 VAC
120 VAC
120 VAC

NEMA-5-15P
NEMA-5-15P
NEMA-5-15P

Decanter warmers operate at a warming temperature of approximately 185ºF ± 10ºF (85 ºC ± 6ºC).

763 p/n 77719 OpManual Decanter Warmers

1