Bloomfield 1883 User Manual

Item No. Project Quantity
E.B.C Lo-Profile Airpot / Thermal Server Coffee Brewer (with Hot Water Faucet)
MODEL 1883
APPLICATION
The new E.B.C. LP is a versatile Lo-Prole® brewer that, at less than 18” tall, is small in stature but big on capacity. Easily tting under standard cabinets, it can brew into a 2.2 liter airpot or 2.5 liter thermal server (no taller than 12” when open). This E.B.C. system uses the standard Electronic Brew Control technology, with a touch keypad and lights, plus an audible signal. The lights and signal guide the user through the different brewer operations.
FEATURES
• Lo-prole coffee brewer is less than 18” tall, easily tting under any standard cabinet.
• Brews into a standard size airpot (no taller than 12” when open) or thermal server that is easily transportable to remote serving areas. Coffee will remain preserved for optimal temperature and taste.
Model: o1883
• Precise brewing temperature is established and maintained throughout the brew cycle, providing cold brew lockout and ensuring full avored coffee and faster brew recovery.
• Countdown Quality Timer™ will signal the end of preset coffee holding time.
• After Hours™ mode will automatically reduce water temperature when not in use, saving energy and increasing component life.
• Brew Cycle Timer alerts user when a brew is complete, and eliminates the risk of double brewing.
• A high level of commonality of parts with other Bloomeld models will signicantly reduce the inventory of spare parts required to service.
• Exclusive design provides easy access to components for quick service.
• Water volume adjustments can be made with ease, no panels to remove or tools required.
• Electronic sensor monitors water temperature with extreme accuracy for more consistent product.
• Superior sprayhead design spreads water over the entire bed of grounds, creating agitation and a oating action that completely saturates the coffee to capture its full, rich essence.
• Unique water valve with built-in ow control and strainer assures consistent operation at supply water pressures from 20 - 90 psi.
• One-piece drawn stainless steel water tank has a superior design for extended life.
• Rugged base rails provide stability and strength, while minimizing brewer height, and provide positive location of the thermal server.
• High quality easy to clean stainless steel construction.
OPTIONS/ACCESSORIES
o Full line of airpots
o Thermal servers
PRODUCT WARRANTY
Limited two year parts & one year labor
Bloomeld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone: (314) 678-6336 · Fax (314) 781-3636
www.wellsbloomeld.com · Printed in the U.S.A.
Sheet No. BLM1883-01/14
E.B.C Lo-Profile Airpot / Thermal Server Coffee Brewer (with Hot Water Faucet)
Model: o1883
Model
Number
1883-120 10 x 19-1/2 x 29
W x D x H
Inches
(MM)
Voltage Watts AMPS
Single Phase
Phase Power Supply
Cord
Approx.
Weight
Installed
LBS (KG)
Approx.
Weight Shipping LBS (KG)
120V 1800 15 Single NEMA 5-15P N/A N/A
(254 x 495 x 737)
height includes
legs
Due to periodic changes in designs, methods, procedures, policies and regulations, the specications contained in this sheet are subject to change without notice. While Wells
exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the
Bloomeld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A. Phone : (314) 678-6336 · Fax (314) 781-5445
www.wellsbloomeld.com · Printed in the U.S.A.
specications. By using the information provided, the user assumes all risks in connection with such use.
NOTE: Specications are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Loading...