Bloomfield 1223EX, 1226EX Owner's Manual

WELLS BLOOMFIELD, LLC

2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: [phone]

www.wellsbloomfield.com

fax: [phone]

713

OWNERS MANUAL

for

HOT WATER

DISPENSER

FOR EXPORT

2 GALLON MODELS:

1223EX

5 GALLON MODELS:

1226EX

Includes:

Installation

Operation

Use & Care

Servicing Instructions

Model 1223EX Dispenser

p/n 77729 Rev. G ECN-13496 M713 080805 cps

PRINTED IN UNITED STATES OF AMERICA

WARRANTY STATEMENT

All electrical equipment manufactured by WELLS
BLOOMFIELD, LLC is warranted against defects in materials
and workmanship for a period of one year from the date of
original installation or eighteen (18) months from the date of
shipment from our factory, whichever comes first, and is for
the benefit of the original purchaser, except that:
a. Obligation for export units is limited to providing parts

only.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN
LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, WHICH ARE HEREBY EXCLUDED.

SERVICE POLICY AND PROCEDURE GUIDE

ADDITIONAL WARRANTY EXCLUSIONS

1. Resetting of safety thermostats, circuit breakers,
overload protectors, or fuse replacements unless
warranted conditions are the cause.

2. All problems due to operation at voltages other than
specified on equipment nameplates; conversion to
correct voltage must be the customer’s responsibility.

3. All problems due to electrical connections not made in
accordance with electrical code requirements and
wiring diagrams supplied with the equipment.

4. Replacement of items subject to normal wear, to include
such items as knobs and light bulbs. Normal maintenance

functions including adjustment of thermostats, microswitches,

and replacement of fuses and indicating lights are not

covered under warranty.

5. All problems due to inadequate water supply, such as

fluctuating, or high or low water pressure.

WELLS BLOOMFIELD, LLC
FOR INDIRECT, INCIDENTAL OR
DAMAGES OR LOSSES FROM ANY CAUSE
WHATSOEVER.

Please consult your classified telephone directory or your food
service equipment dealer; or, for information and other details
concerning warranty, write to:

Phone: [phone] Fax: [phone]

6. All problems due to mineral/calcium deposits, or
contamination from chlorides/chlorines. De-liming is
considered a preventative maintenance function and is
not covered by warranty.

7. Full use, care and maintenance instructions are supplied
with each machine. Those miscellaneous adjustments
noted are customer responsibility. Proper attention will
prolong the life of the machine.

8. Any use of non-genuine Wells Bloomfield parts
completely voids any warranty.

9. Installation, labor and job check-out are not considered
warranty.

10. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technicians ability
to perform services are not covered by warranty.
This includes institutional and correctional facilities.

Service Parts Department

Wells Bloomfield, LLC

Verdi, NV 89439

SHALL

P.O. Box 280

NOT BE LIABLE

CONSEQUENTIAL

713 77729 Owners Manual Hot Water Dispenser for Export

SHIPPING DAMAGE CLAIMS PROCEDURE

NOTE: For your protection, please note that equipment in

this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory.
Upon acceptance of this shipment, the transportation
company assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill
or express receipt, and that the note of loss or damage
is signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
must be done within fifteen (15) days from the date the
delivery was made to you. Be sure to retain the
container for inspection.

Wells Bloomfield cannot assume liability for damage or loss
incurred in transit. We will, however, at your request, supply
you with the necessary documents to support your claim.

xi

TABLE OF CONTENTS

WARRANTY STATEMENT xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
INSTALLATION INSTRUCTIONS 4
OPERATION 6
CLEANING INSTRUCTIONS 7
TROUBLESHOOTING SUGGESTIONS 8
SERVICING INSTRUCTIONS 9
Deliming Instructions 12
EXPLODED VIEW & PARTS LIST 13
WIRING DIAGRAMS 16

Thank You for purchasing this
Wells Bloomfield appliance.

Proper installation, professional
operation and consistent
maintenance of this appliance will
ensure that it gives you the very
best performance and a long,
economical service life.

This manual contains the
information needed to properly
install this appliance, and to use,
care for and maintain or repair the
appliance in a manner which will
ensure its optimum performance.

SPECIFICATIONS

MODEL

1223EX

VOLTS

1ø 50/60Hz

240 1800 7.5

WATTS

AMPS

1ø

POWER SUPPLY

CORD

Supplied

IEC 1800W Minimum

1226EX

240 4000 16.5

APPLICABILITY

This manual applies to the following Wells Bloomfield products:
1223EX 2-Gallon Hot Water Dispenser

1226EX 5-Gallon Hot Water Dispenser

713 77729 Owners Manual Hot Water Dispenser for Export

Not Provided

1

FEATURES AND OPERATING CONTROLS

FRONT VIEW

READY LITE

POWER LITE

DISPENSE
FAUCET

HOT WATER

REAR COVER

THERMOSTAT
ACCESS

DRAIN LINE
TUBING CLAMP

REAR VIEW

FLEXIBLE
DRAIN LINE

WATER SUPPLY
CONNECTION

TANK HEATER SWITCH

713 77729 Owners Manual Hot Water Dispenser for Export

RUBBER
GRIP FEET

POWER CORD
(WHEN SUPPLIED)

2

PRECAUTIONS AND GENERAL INFORMATION

WARNING: ELECTRIC SHOCK HAZARD

All servicing requiring access to non-insulated components must be performed by qualified
service personnel. Do not open any access panels which require the use of tools.

Failure to heed this warning can result in electrical shock.

WARNING: INJURY HAZARD

All installation procedures must be performed by qualified personnel with full knowledge of all
applicable electrical and plumbing codes. Failure could result in property damage and
personal injury.

WARNING: ELECTRIC SHOCK HAZARD

Hot Water Dispenser must be properly grounded to prevent possible shock hazard.
DO NOT assume a plumbing line will provide such a ground. Electrical shock will cause death
or serious Injury.

WARNING: BURN HAZARD

This appliance dispenses very hot liquid. Serious bodily injury from scalding can occur from
contact with dispensed liquids.

This appliance is intended for commercial use only.
This appliance is intended for use to dispense heated water.

No other use is recommended or authorized by the
manufacturer or its agents.

This appliance is intended for use in commercial establishments,
where all operators are familiar with the appliance use,
limitations and associated hazards. Operating instructions and
warnings must be read and understood by all operators and
users.

Except as noted, this piece of equipment is made in the USA
and has American sizes on hardware. All metric conversions
are approximate and can vary in size.

The following trouble shooting, component views and parts lists
are included for general reference, and are intended for use by
qualified service personnel.

This manual should be considered a permanent part of this
appliance. The manual must remain with the appliance if it is
sold or moved to another location.

CAUTION:

EQUIPMENT DAMAGE

DO NOT plug in or energize this
appliance until all Installation
Instructions are read and followed.
Damage to the dispenser will
occur if these instructions are not
followed.

CAUTION:

BURN HAZARD

Dispensed liquid is VERY HOT
and can cause burns.

CAUTION:

BURN HAZARD

Exposed surfaces of the
appliance may be HOT to the
touch and can cause burns.

713 77729 Owners Manual Hot Water Dispenser for Export

3

INSTALLATION

READ THIS CAREFULLY BEFORE STARTING THE INSTALLATION

IMPORTANT:

To enable the installer to make
a quality installation and to
minimize installation time, the
following suggestions and tests
should be done before the
actual unit installation is started:

CAUTION:

EQUIPMENT DAMAGE

DO NOT plug in or energize this
appliance until all Installation
Instructions are read and
followed. Damage to the
dispenser will occur if these
instructions are not followed.

CAUTION:

UNSTABLE
EQUIPMENT HAZARD

It is very important for safety
and for proper operation that the
dispenser is level and stable
when standing in its final
operating position. Provided
adjustable, non-skid legs must
be installed at each corner of
the unit. Failure to do so will
result in movement of the
dispenser which can cause
personal Injury and/or damage
to appliance.

NOTE: Water supply inlet line
must meet certain minimum
criteria to insure successful
operation of the dispenser.
Bloomfield recommends 1/4"
copper tubing for installation of
less than 12 feet and 3/8" for
more than 12 feet from a 1/2"
water supply line.

REFER TO EXPLODED VIEWS PAGE 14 FOR COMPONENT
NAMES/NUMBERS.

Unpack the unit. Inspect all components for completeness and
condition. Ensure that all packing materials have been removed
from the unit.

LEVELING THE UNIT

Two Gallon Dispenser is NOT provided with adjustable legs. Be
sure dispenser is placed on a solid level surface with all four feet
touching the surface.

Five Gallon Dispenser is provided with adjustable legs. Verify
that an adjustable leg is installed at each corner of the brewer.
Set Brewer in its operating location. Level the Brewer. A spirit
level should be placed on the top of the unit, at the edge, as a
guide when making level adjustments. Level the unit from left to
right and front to back by turning the adjustable feet. Be sure all
four feet touch the counter to prevent tipping.

PLUMBER’S INSTALLATION INSTRUCTIONS
Dispenser should be connected to a POTABLE WATER, COLD

WATER line. Flush water line before connecting to appliance.

DO NOT use a saddle valve with a self-piercing tap for the water
line connection. Such a tap can become restricted by waterline
debris. For systems that must use a saddle tap, shut off the main
water supply and drill a 3/16” (minimum) tap for the saddle
connection, in order to insure an ample water supply. Remember
to flush the line prior to installing the saddle.

The dispenser must be installed on a water line with average
pressure between 20 PSI and 90 PSI. If your water pressure
exceeds 90 PSI at anytime, a pressure regulator must be
installed in the water supply line to limit the pressure to not more
than 90 PSI in order to avoid damage to lines and solenoid.

A water shut-off valve should be installed on the incoming water
line in a convenient location (Use a low restriction type valve,
such as a 1/4-turn ball valve, to avoid loss of water flow thru the
valve.

713 77729 Owners Manual Hot Water Dispenser for Export

4