Blomberg GKS 3134 X, GKS 3204 X, MMS 3201 X, MKS 3201 X, MGS 3101 X Instruction Manual
Instructions Booklet
built-in cooktops
Gebrauchsanweisungen
kochmulden, Einbauversion
GKS 3134 X GKS 3204 X
MMS 3201 X MKS 3201 X
MGS 3101 X
Important warnings and tips for use
♦ IMPORTANT! This manual constitutes an integral part of the appliance. It must be kept intact
and within easy reach during the entire life of the cooktop. Please carefully read this manual
and all the instructions contained herein before using the appliance. Keep any spare parts
supplied with the appliance. Installation must be carried out by a qualified technician and in
compliance with current regulations. This appliance is intended solely for domestic use and is
designed for the following functions: cooking and reheating food. Any other use is
considered as improper.
The manufacturer declines all liability resulting from poor installation, tampering,
inexpert use and use for purposes other than those specifically stated.
♦ Check that the appliance has not been damaged during transport.
♦ Keep all packaging materials (plastic bags, polystyrene foam, nylon, etc.) away from children,
as they are potentially dangerous.
♦ The packaging material is recyclable, and marked with the recycling symbol
the appliance responsibly.
♦ This appliance must be used by adults only. Make sure children do not touch the controls
or play with the appliance.
♦ Installation and gas/electrical connections must be carried out by a qualified technician in
accordance with the manufacturer's instructions and in full compliance with current laws and
safety regulations.
♦ Electrical safety can only be guaranteed if the product is connected to a suitable earth
connection.
♦ It is dangerous to modify or attempt to modify the appliance. In the event of a malfunction, do
not attempt to repair the appliance yourself, but contact a qualified technician.
♦ After using the cooktop, ensure the indicator on the knob is turned to the "off" position and
close the mains gas delivery tap or the gas cylinder tap.
♦ Should you decide not to use the appliance any longer, before scrapping it make it unusable in
accordance with current environmental health and safety laws, ensuring any parts which might
constitute a danger to children are rendered harmless.
♦ The appliance data plate, with technical specifications, is positioned at a visible point under the
safety cover and is also enclosed with this manual. The data plate below the safety cover
must under no circumstances be removed.
♦ Illustrations for the use of the appliance are grouped together at the end of this manual.
. Dispose of
Declaration of Conformity
This appliance conforms to the following EC directives:
− 90/396/EEC “Gas safety requirements”
− 73/23/EEC “Low voltage”
− 89/336/EEC “Electromagnetic compatibility”
− 93/68/EEC “General Standards”
− 89/109/EEC “Materials or objects destined to come into contact with foodstuffs”
These instructions are valid only for those countries whose ID
initials appear on the data plate found on the instructions
handbook and on the appliance.
1
COOKTOP SPECIFICATIONS
Warnings:
This appliance is designed to be built into a housing unit.
♦ The installation class is type 3 for gas and type Y for electric parts.
♦ Housing units must be designed to withstand temperatures of up to 90°C or over.
♦ For correct installation, refer to the relevant paragraph and reference drawings.
♦ The use of a gas cooking appliance produces heat and humidity in the room in which it is
installed. Ensure the kitchen is well ventilated: keep natural ventilation openings open, or install
a mechanical ventilation device (extractor hood with exhaust duct). In the case of intensive or
prolonged use of the appliance it may be necessary to provide additional ventilation, for
example, by opening a window, or more efficient ventilation, for example by increasing the
hood speed.
This handbook is valid for several types of cooktop. Refer to the data plate on the back in order to
identify the model (Mod. Tc) that corresponds to your appliance. These initials, together with the
instructions in the following paragraphs and the illustrations at the back of the manual (Fig1-33) will
show the particular composition of your appliance.
2
USING THE COOKTOP
Gas burners
The delivery of gas to the burners is controlled by the knobs shown in fig. 36 that in turn control the
taps. The symbols, depending on the various versions, may be printed on the knobs or on the
control panel. By moving the indicator to coincide with the printed symbols, the following
adjustments can be made:
OTap closed, no gas delivery
Maximum capacity, maximum gas delivery
Minimum capacity, minimum gas delivery
Burner ignition
- Burners with electric ignition
Models with ignition incorporated in the control knobs
These models are identified by the symbol ( (Maximum delivery).
To light one of the burners, press the knob down and turn it to the maximum delivery position,
holding down until the burner lights. Next adjust the flame by turning the knob to obtain the desired
intensity.
3
Note:
If the particular nature of the local gas supply makes it difficult to ignite the burners with the knob
turned to the maximum setting, repeat the operation without a pan in position and with the knob
turned to the minimum setting.
- Burners with safety valves
Some models are equipped with safety valves which automatically shut off the gas delivery in the
event the burner should, for any reason, go out.
To relight the burner, turn the knob to position O and repeat the ignition procedure explained in the
following paragraphs.
Using the burners
Depending on the type of electric ignition fitted, proceed as follows:
)For models fitted with ignition incorporated in the knobs, turn the gas tap knob to the maximum
delivery position, then press and hold down for about 4÷5 seconds. Release the knob and
adjust the flame by turning the knob to the desired intensity.
)'Warning':
The ignition device must not be used for more than 15 seconds.
If after this length of time the burner does not light, or if it goes out again accidentally,
wait 1 minute before trying to ignite the burner again.
)For models fitted with ignition switch, turn the gas tap knob to the maximum delivery position,
then press the ignition switch and the knob, holding down for about 4÷5 seconds. Then release
the knob and adjust the flame by turning the knob to the desired intensity.
Using the grids
The panstand grids are designed to make the appliance easy and safe to use. Always check the
panstand grids are properly positioned before using the appliance. Furthermore, always check the
protective rubber feet are all present and correctly positioned.
Special “WOK” support grid (Fig. 35 optional)
This is placed on top of the triple crown burner when using a “WOK” (concave bottom pan). In
order to prevent serious malfunction of the burner,
and never use the wok grid for flat bottomed pans
Choosing the right burner
The symbols stamped on the control panel (fig.36) next to the knobs indicate which knob
corresponds to which burner. To choose the most suitable burner, take into account the diameter of
the pan as well as the pan capacity (see table).
The diameter of the pan must be proportionate to the burner power in order to ensure high yield.
never use a wok without this special grid
Pan diameter
Burner
Auxiliary
Rapid 200 mm 240 mm
Triple crown 240 mm 260 mm
Fish kettle Maximum dimensions: 140X350 mm
Minimum diameter
60 mm
reducer)
(with
Maximum diameter
140 mm
4
Loading...