Blodgett BP-100 User Manual

BLODGETT OVEN COMPANY

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401

Toll Free: [phone] • Phone: [phone] • Fax: [phone]

EXTERIOR CONSTRUCTION

 Stainless steel front, top, sides, and back
 Angle iron construction
 Single pane tempered glass window in stainless steel door
 Single chrome plated door handle
 Slide-out modular front control panel
 Pan storage area adjacent to control panel

INTERIOR CONSTRUCTION

 Stainless steel interior with removable top and bottom air diverters.
 Stainless steel removable water reservoir with integral immersion type

heater and liquid sensing mechanism.

 Stainless steel pan supports, eight positions with a minimum of 3" (76mm)

spacing

OPERATION

 One tubular immersion type heater rated at 750 watts.
 One tubular type air heater rated at 800 watts.
 Direct snap acting thermostat with temperature control range of 80°F (27°C) to

125°F (52°C)

 6.5 quart (6.15 liter) water reservoir with perforated bottom liner for

manual filling.

 1/50 horsepower tangential blower with ducted delivery system
 Independent humidity control

STANDARD FEATURES

 Solid state thermostat and mechanical humidistat
 Two year parts and labor warranty*

* For all international markets, contact your local distributor.

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)

 Legs/casters:

 4" (102mm) Low profile casters
 6" (152mm) stainless steel legs

 25" (635mm) stainless steel legs
 Solid state humidistat
 Euronorm pan racks available on export models

MODEL BP-100

Proofing Cabinet

BP-100

Project

Item No.

Quantity

The BP-100 is utilized as a free standing unit or may be combined with the
Blodgett Mark V or DFG-100 Ovens.

All data is shown per oven section, unless otherwise indicated.

BLODGETT OVEN COMPANY

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401

Toll Free: [phone] • Phone: [phone] • Fax: [phone]

MODEL BP-100

SHORT FORM SPECIFICATIONS

Provide Blodgett proofing cabinet model BP-100 (single/double) compartment. Each compartment shall have (stainless) steel liner and (stainless) steel pan supports, eight positions
with a minimum of 3" (76mm) spacing. Door shall (be solid stainless steel have single pane tempered glass window) with single chrome plated door handle. Unit shall have one tubu­lar immersion rated at 500 watts and one tubular type air heater rated at 800 watts.

Unit shall have 1/50 horsepower tangential blower with ducted delivery system and independent humidity control. Slide-out modular control panel shall have direct snap acting thermo­stat with temperature control range of 80°F (27°C) to 125°F (52°C) and independent humidity control. Provide options and accessories as indicated.

DIMENSIONS:

Floor space 38-1/8" (968mm) W x 36-7/8" (937mm) D

MAXIMUM INPUT:

BP-100 1675 Watts (per section)

POWER SUPPLY:

120 VAC, 60 Hz., 1 phase, 1675W, 14 Amperes,
240 VAC, 50 Hz., 1 phase, 1675W, 7 Amperes,
220 VAC, 50 Hz., 1 phase, 1675W, 7.6 Amperes,

1/50 H.P. motor, 2600 RPM

MINIMUM ENTRY CLEARANCE:

Uncrated 38" (965mm)
Crated 43-1/8" (1095mm)

SHIPPING INFORMATION:

Weight: BP-100 Single 400 lbs. (181 kg)
Crate size:
43-1/8" (1095mm) x 43-1/2" (1105mm) x 48-1/4" (1219mm)

Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY

NOTE: The company reserves the right to make substitutions of components without prior notice

TOP VIEW

APPROVAL/STAMP

P/N 35045 Rev D (8/01)

66” (1675)
POWER CORD

63” (1600)

56” (1422)

36-7/8”

(937)

23”

(584)

38-1/8” (958)

2-7/8”

(73)

42-1/8” (1070)

35-1/8” (892)

14-1/8” (359)

4-1/4” (105)

35” (889)

25” (635)

0”

SINGLE ON CASTERS

0”

SINGLE ON 25 LEGS