Blodgett 6DS-KTT User Manual
Project
Item No.
Quantity
Model 6DS-KTT - 6 gallon (23 litres) direct steam table top tilting kettle
CONSTRUCTION
304 stainless steel, one-piece welded construction
2/3 jacketed kettle
All exposed surfaces shall be stainless steel
Sturdy cast, chrome plated stainless steel arms for sturdy support
No exposed steam piping.
Rim shall be reinforced with a welded butterfly shaped pouring lip, for
pouring control and durability. Kettle can be emptied into an 8” high pan
on a flat table.
Handle for controlled pouring of kettle content. Two operating handle lugs
so that the handle can be attached on right or left side
Rear leg stops the kettle in the upright position
ASME shop-inspected, stamped and registered with the National Board
for operation up to a maximum working pressure of 55 PSI
STANDARD FEATURES
One year parts and labor warranty*
* For all international markets, contact your local distributor.
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Basket inserts
Lift off cover
Steam trap assemblies
316 stainless steel interior
Steam regulator
6DS-KTT
Direct Steam Tabletop Tilting Kettle
6DS-KTT TABLETOP TILTING KETTLE
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
6DS-KTT TABLETOP TILTING KETTLE
SHORT FORM SPECIFICATIONS
Provide Blodgett model 6DS-KTT (6 gallon) direct steam tabletop tilting kettle.Unit shall have full bottom hemisphere steam jacket with one piece welded construction of Type 304 stainless steel, and sturdy tubular support arms. Reinforced bar rim, with butterfly shaped pouring lip standard. Lugs provided for use of handles on either side of unit. NSF listed, ASME code
constructed and National Board registered. Operates dependably from 5 up to 55 PSI maximum. Steam and condensate connections required. Provide options and accessories as indicated.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice.
TOP VIEW
8 (203)
15.25
(387
14.87 (378)
9
(229)
12 (305)
2 (51)
4 (101) dia.
12
(304)
(2) 1-3/8 dia. holes req.
for mounting
4
(101)
FRONT VIEW
8.87
(225)
18.63
(473)
13.5
(343)
4
(101)
3/8" I.P.S.
condensate outlet
3/8" I.P.S.
steam inlet
NOTES:
1. Extended stem. globe vlave and collared sleeve
furnished at extra cost.
2. Dimensions are in inches (mm).
SIDE VIEW
Kettle in
tilted position
Wall
16.13 (409)
8.5
(216)
Handle can be mounted
on either side of kettle
8.63
(219)
14.13
(359)
7
(178)
6
(152)
APPROVAL/STAMP
P/N S00125 Rev C (5/11)
MAXIMUM PRESSURE:
55 PSI (379 kPa) (optional higher working pressure is available)
SHIPPING INFORMATION:
Approx. Weight:
6DS-KTT 45 lbs. (20 kg)
Loading...