Blodgett 40G-KLT, 60G-KLT General Manual
Project
Item No.
Quantity
Model 20G-KLT - 20 gallon (76 litres) gas tilting floor kettle
Model 40G-KLT - 40 gallon (151 litres) gas tilting floor kettle
Model 60G-KLT - 60 gallon (227 litres) gas tilting floor kettle
CONSTRUCTION
316 stainless steel, one-piece welded construction
2/3 jacketed kettle
All exposed surfaces shall be stainless steel
Kettle body is sheathed in stainless steel and air gap insulated.
ASME shop inspected, stamped and registered with the National Board
for operation up to a maximum working pressure of 50 PSI.
Outer sheathing and air insulating gap retains heat and keeps kettle
exterior cooler to the touch.
Heavy-duty stainless steel combination kettle support tilt trunnion on an
enclosed base.
Stainless steel tubular legs with adjustable bullet feet
Heavy reinforced bar rim with a welded-in butterfly shaped pouring lip for
pouring control and durability
OPERATION
Gas-heated (natural, butane, propane) self-contained steam source to
provide kettle temperatures of 150 to approximately 295°F
Patented fin tube burner assembly delivers 62-65% efficient combustion,
depending on kettle size
Thermostatically controlled to shut off automatically when desired tem-
perature is reached or on when temperature falls below desired setting
Factory charged with chemically-pure water and rust inhibitors to ensure
long life and minimum maintenance
Smooth operating, self-locking tilt mechanism
Thermostat
Pressure gauge
Safety valve
Pressure limit control
Water sight glass
Lower water cut off
Gas regulator valve
Electronic ignition to standing pilot
Power on switch
Power on, heating, and low water indicator lights
Gas supply shuts off automatically when the unit is tilted
STANDARD FEATURES
Faucet bracket
Removable 1/4” perforated stainless steel strainer
One year parts and labor warranty*
* For all international markets, contact your local distributor.
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Etched markings
Gallons
Litres
Strainers
1/8” perforated disc strainer
1/4” perforated disk strainer
Solid disc strainer
Lip strainers
Faucets
Single pantry faucet
Double pantry faucet
Covers
Lift off cover
Hinged cover kit
2” tangent drawoff with 1/8” perforated disc strainer
Basket inserts
Pan carrier for 40 and 60 gallon kettles
Kettle brush kit
Contour measuring strip
G-KLT
Gas Floor Model Tilting Kettle
G-KLT TILTING FLOOR KETTLE
Shown with optional cover
BLODGETT
www.blodgett.com 44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
G-KLT TILTING FLOOR KETTLE
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of
components without prior notice.
6-1/2"
(165)
4-5/8" (117)
12-5/8"
(321)
6-1/8" (156)
1-13/16"
(46) Typ.
A
I.D.
3-1/2" (89)
29"
(737)
E
P
N
2" (51)
D
Gas Inlet
½”NPT
Optional
Faucet
2" (51)
Typ.
C
TOP VIEW
NOTES:
1. Dimensions are in inches (mm).
6.HEATLIGHTISONWHENMAINBURNER IS ON.6.HEATLIGHTISONWHENMAINBURNER IS ON.
1-2LOWHEAT(SIMMER),8-9HIGHHEAT (BOIL)1-2LOWHEAT(SIMMER), 8-9 HIGH HEAT (BOIL)
TOSTOPTOSTOP
2.SETPOWERSWITCHTO"OFF".2.SETPOWERSWITCHTO"OFF".
1.SETTHERMOSTATTO"OFF".1.
SETTHERMOSTATTO"OFF".
2.CHECKFORWATERINKETTLE.LEVELMUST BE ABOVE "MINIMUM".2.CHECKFORWATERINKETTLE.LEVEL MUST BE ABOVE "MINIMUM".
b.LIFTSAFETYVALVELEVERTOVENTKETTLE.b.
LIFTSAFETYVALVELEVERTOVENTKETTLE.
1.READANDUNDERSTANDOPERATORSMANUAL.1.
READANDUNDERSTANDOPERATORSMANUAL.
5.ROTATETHERMOSTATUNTILHEATLIGHTISON.5.ROTATETHERMOSTATUNTILHEATLIGHTISON.
*
*
*
W
A
R
N
I
N
G
*
*
*
E
S
C
A
P
I
N
G
S
T
E
A
M
C
A
N
C
A
U
S
E
S
E
V
E
R
E
B
U
R
N
S
!
!
*
*
*
W
A
R
N
I
N
G
*
*
*
E
S
C
A
P
I
N
G
S
T
E
A
M
C
A
N
C
A
U
S
E
S
E
V
E
R
E
B
U
R
N
S
!
!
a.HEATKETTLEUNTILPRESSUREGAUGESHOWS5 PSI.a.HEATKETTLEUNTILPRESSUREGAUGESHOWS5 PSI.
BETWEEN20"Hgto30"HgWHEN KETTLE IS COLD.BETWEEN
20"Hgto30"HgWHENKETTLE IS COLD.
3.CHECKFORVACUUMINKETTLE.PRESSURE GAUGE SHOULD READ3.
CHECKFORVACUUMINKETTLE.PRESSUREGAUGE SHOULD READ
TOSTARTTOSTART
4.SETPOWERSWITCHTO"ON",4.SETPOWERSWITCHTO"ON",
3.OPENGASSUPPLYVALVE.3.
OPENGASSUPPLYVALVE.
2.SETTHERMOSTATTO"OFF".2.
SETTHERMOSTATTO"OFF".
4.IFREQUIRED,ESTABLISHVACUUM.4.IFREQUIRED,ESTABLISHVACUUM.
BEFOREOPERATIONBEFORE OPERATION
1.SETPOWERSWITCHTO"OFF".1.SETPOWERSWITCHTO"OFF".
c.ALLOWLEVERTOSNAPCLOSED.c.ALLOWLEVER TO SNAP CLOSED.
LOWWATERLOWWATER
HEAT
OFF
ON
POWER
30
30
40
50
60
G
F
Electrical Connection
7/8” dia. hole
B
6" Min.
7-1/2” (191) Max.
(152)
2-3/16" (56)
6" (152)
H
Adjustable Feet
6"
(152)
Optional Cover
#51 Shown
Kettle
Tilt
Handle
Wall
6" (152) Min.
Left Side
Clearance
FRONT VIEW
J
Kettle in Full
Tilt Position
Pour Path Min.
M
L
K
Optional
2” (51)
Tangent
Drawoff
Faucet Bracket
Furnished as
Standard
10" (254
Min. Rear
Clearance
9-1/2"
(241)
Wall
Pour Path Max.
RIGHT SIDE VIEW
APPROVAL/STAMP
P/N S00119 Rev A (4/11)
20G-KLT 40G-KLT 60G-KLT
A
19.88 (505) 25.75 (654) 30 (762)
B
35 (889) 47 (1194) 47 (1194)
C
25.75 (654) 29.5 (749) 30.88 (784)
D
31 (787) 26.5 (673) 35.5 (902)
E
32.75 (832) 34.63 (879) 42.88 (1089)
F
18 (457) 18.25 (463) 19 (483)
G
39.38 (1000) 43.13 (1095) 46.25 (1175)
H
26 (660) 28 (711) 28 (711)
J
15.63 (397) 13.75 (349) 12.38 (314)
K
27 (686) 29.25 (743) 35 (889)
L
30.25 (768) 31 (787) 31.75 (806)
M
51 (1295) 60.5 (1537) 61.5 (1562)
N
37.25 (946) 36.13 (918) 43.13 (1095)
P
2 (51) 5.44 (138) 7.5 (191)
SHORT FORM SPECIFICATIONS
Provide Blodgett model 20G-KLT (20 gallon), 40G-KLT (40 gallon) and 60G-KLT (60 gallon) gas fired, stainless steel, steam jacketed kettle. Unit shall be all stainless steel construction
with reinforced bar rim, butterfly shaped pouring lip and smooth action mechanical tilt. Patented fin tube burner assembly is 62-65% efficient, with electronic ignition standard. NSF listed,
A.S.M.E. code constructed for 50 PSI and A.G.A. design certified (Natural & Propane gas only). Requires 1/2” IPS gas line and 115 volt electric service. Provide options and accessories
as indicated.
MAXIMUM INPUT:
20G-KLT 72,000 BTU
40G-KLT 100,000 BTU
60G-KLT 150,000 BTU
GAS SUPPLY:
1/2" NPT connection required. A gas shut-off valve must be installed in supply
piping convenient and adjacent to unit.
Inlet Pressure:
Natural 3.5" W.C. min, 14” W.C. max
Propane 10" W.C. min, 14” W.C. max
ELECTRICAL CONNECTION:
Requires one 115 Volt, single-phase, 60 HZ, 5 AMP supply.
SHIPPING INFORMATION:
Approx. Weight:
20G-KLS 530 lbs. (240 kg)
40G-KLS 640 lbs. (290 kg)
60G-KLS 770 lbs. (349 kg)
Loading...