Blodgett 40DS-KPT, 60DS-KPT Operation Manual
Project
Item No.
Quantity
Model 20DS-KPT - 20 gallon (76 litres) direct steam pedestal tilting kettle
Model 40DS-KPT - 40 gallon (151 litres) direct steam pedestal tilting kettle
Model 60DS-KPT - 60 gallon (227 litres) direct steam pedestal tilting kettle
CONSTRUCTION
316 stainless steel, one-piece welded construction
2/3 jacketed kettle
All exposed surfaces shall be stainless steel
Heavy, durable bar rim with a continuous seal weld on the underside to
ensure maximum durability and sanitation.
Trunnion-mounted to stainless steel yoke stand with pedestal base.
Pedestal is flanged down vertically to ensure proper sealing and easy
mounting to floor or deck
Self-locking gear tilt mechanism and rotary steam joint are completely
enclosed in stainless steel housing, mounted on the right kettle support
arm
Large hand crank provides easy operator tilting and precise pouring con-
trol
Heavy-duty, butterfly-shaped pouring lip welded to the top rim of kettle to
ensure proper pouring control at all times
ASME shop-inspected, stamped and registered with the National Board
for operation up to a maximum working pressure of 25 PSI
STANDARD FEATURES
Faucet bracket
One year parts and labor warranty*
* For all international markets, contact your local distributor.
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401
Phone: (802) 658-6600 • Fax: (802) 864-0183
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Etched markings
Gallons
Litres
Strainers
1/8” perforated disc strainer
1/4” perforated disk strainer
Solid disc strainer
Lip strainer
Faucets
Single pantry
Double pantry
Tangent Draw Off
2” draw off valve
3” draw off valve
Lift-off cover
Basket inserts
Cold water cooling
Steam trap assemblies
Kettle brush kit
Pan carrier for 40 and 60 gallon kettles
Steam regulator
Contour measuring strip
DS-KPT
Direct Steam Pedestal Base Tilting Kettle
DS-KPT PEDESTAL BASE TILTING KETTLE
BLODGETT
www.blodgett.com • 44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
DS-KPT PEDESTAL BASE TILTING KETTLE
SHORT FORM SPECIFICATIONS
Provide Blodgett model 20DS-KPT (20 gallon), 40DS-KPT (40 gallon) or 60DS-KPT (60 gallon) direct
steam pedestal base tilting kettle. Unit shall solid one-piece welded construction of type 316 stainless
steel liner and 304 stainless steel jacket with heavy reinforced bar rim and pouring lip welded to top
rim of kettle, mounted on pedestal and yoke stand. Quick-action self-locking worm gear tilt mechanism standard. NSFlisted. ASME code- constructed and National Board registered for operation up
to 25 PSI. Provide options and accessories as indicated.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components
without prior notice.
A
ID
Faucet Mounting
Bracket is standard
& furnished
(Faucet is optional)
‘T’ NPT steam inlet
Self locking
worm & gear
tilting mechanism
TOP VIEW
'T' NPT
Steam
Outlet
C
B
3"
Min. Side
Clearance
(Both Sides)
F
D
E
ASME Approved
Safety Valve
9/16" dia.
(4) holes
S
R
SECTION A-A
Floor Mounting Layout
of kettle
L
C
J
See
note 2
A
A
G
Condensate
drain tube
H
See
note 2
Jacket
drain
petcock
FRONT VIEW
M
L
Fully
tilted
position
Pour
Path
N
min. rear
clearance
Wall
K see
note 2
Tilt
radius
of kettle
L
C
Pour path max.
Pour path min.
SIDE VIEW
Q
4.5”
(114)
P
6.25”
(159)
when open
Optional
tangent
drawoff
of kettle
L
C
NOTES:
1. 2” tangent drawoff and valve
furnished with specified at extra cost.
2. For kettles with 2” tangent drawoff,
add 5” (20 gal.) and 7” (40 gal.) to
dimensions H, J and K.
3. Approx. 5 PSI required to push
consensate up drain tube.
4. Pedestal must be securely anchored
and sealed to the floor.
5. If tangent drawoff is required on 60
gal kettle, order trileg kettle.
6. Dimension are in inches (mm).
APPROVAL/STAMP
P/N S00122 Rev A (4/11)
MAXIMUM PRESSURE (all models):
25 PSI (173 kPa) (optional higher working pressure is available)
SHIPPING INFORMATION:
Approx. Weight:
20DS-KPT 235 lbs. (107 kg)
40DS-KPT 275 lbs. (125 kg)
60DS-KPT 309 lbs. (140 kg)
20DS-KPS 40DS-KPS 60DS-KPS
A
20 (508) 26 (660) 30 (762)
B
16.13 (410) 19.25 (489) 21.25 (540)
C
20.13 (511) 23.75 (603) 25.75 (654)
D
36.25 (921) 43 (1092) 47 (1194)
E
23 (584) 30 (762) 34 (864)
F
13 (330) 17 (432) 19 (483)
G
18.5 (470) 22 (559) 25 (635)
H
36 (914) 38.5 (978) 43 (1054)
J
24.5 (622) 26 (660) 28.5 (679)
K
10.63 (270) 9 (229) 7.75 (197)
L
36 (914) 38 (965) 42 (1067)
M
11.5 (292) 12.5 (318) 14.5 (368)
N
12 (305) 15 (381) 16 (406)
P
14.75 (375) 13.75 (349 N/A
Q
11.5 (292) 12.5 (318) N/A
R
16 (406) 16 (406) 18 (457)
S
14.5 (368) 14.5 (368) 16.5 (419)
T
0.5 (13) 0.75 (19) 0.75 (19)
Loading...