Blodgett 40DS-KLT, 60DS-KLT, 80DS-KLT General Manual

Project
Item No.
Quantity
Model 20DS-KLT - 20 gallon (76 litres) direct steam tri-leg tilting kettleModel 40DS-KLT - 40 gallon (151 litres) direct steam tri-leg tilting kettleModel 60DS-KLT - 60 gallon (227 litres) direct steam tri-leg tilting kettleModel 80DS-KLT - 80 gallon (303 litres) direct steam tri-leg tilting kettle
CONSTRUCTION
316 stainless steel, one-piece welded construction2/3 jacketed kettleAll exposed surfaces shall be stainless steelHeavy, durable bar rim with a continuous seal weld on the underside to
ensure maximum durability and sanitation.
Trunnion-mounted to stainless steel yoke stand with tubular leg supportsSelf-locking gear tilt mechanism and rotary steam joint are completely
enclosed in stainless steel housing, mounted on the right kettle support arm
Large hand crank provides easy operator tilting and precise pouring con-
trol
Heavy-duty, butterfly-shaped pouring lip welded to the top rim of kettle to
ensure proper pouring control at all times
ASME shop-inspected, stamped and registered with the National Board
for operation up to a maximum working pressure of 25 PSI
STANDARD FEATURES
Faucet bracket One piece dome cover with spring assisted cover actuator2” sanitary tangent drawoffOne year parts and labor warranty*
* For all international markets, contact your local distributor.
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401
Phone: (802) 658-6600 • Fax: (802) 864-0183
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Etched markings
GallonsLitres
Strainers
1/8” perforated disc strainer1/4” perforated disk strainerSolid disc strainerLip strainer
Covers
Lift-off cover available for 20 to 80-gallon modelsCounter-balanced cover available on 40 to 80-
gallon models
Faucets
Single pantryDouble pantry
Tangent Draw Offs
2” draw off
3” draw offBasket insertsCold water coolingSteam trap assembliesKettle brush kitPan carrier for 40 and 60 gallon kettlesContour measuring strip
DS-KLT
Direct Steam Tri-Leg Tilting Kettle
DS-KLT TRI-LEG TILTING KETTLE
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
DS-KLT TRI-LEG TILTING KETTLE
SHORT FORM SPECIFICATIONS
Provide Blodgett model 20DS-KLT (20 gallon), 40DS-KLT (40 gallon), 60DS-KLT (60 gallon), 80DS­KLT (80 gallon) or 100DS-KLT (100 gallon) direct steam tri-leg tilting kettle. Unit shall be stainless steel, 2/3 jacketed, direct steam stationary kettle. Solid one-piece welded construction of type 316 stainless steel liner and 304 stainless steel jacket with heavy-duty reinforced bar rim and extra heavy, wide pouring lip welded to top rim of kettle. Quick-action self locking worm gear tilt mechanism stan­dard. Kettle mounted on heavy stainless steel tubular stand with adjustable flanged feet. NSF-listed. ASME codeconstructed and National Board registered for operation up to 25 PSI. Provide options and accessories as indicated.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice.
30-5/8
15
21 7/16
R13
LEG LOCATION
5
3-3/4 B.C.
7/16 DIA. (3 HOLES)
(TYPICAL FLOOR FLANGE)
A
V
U
F
E
D
J - I.P.S.
Steam
Outlet
Faucet Mounting Bracket with 1-3/8” dia hole is standard and furnished
Self Locking Worm & Gear Tilting Mechanism
H - I.P.S. Steam Inlet
TOP VIEW
Condensate Drain Tube
Jacket Drain Petcock
C
B
M
M
G
FRONT VIEW
Adjustable Leg Flanges (5/8”)
NOTES:
1. Approximately 5 PSI required to push condensation up drain tube.
2. Leg flanges must be securely anchored t the floor.
3. Dimensions refer to kettles with 2” drawoff valve.
W
N
K
Pour Path
L
Max. Pour Path
Approximate
SIDE VIEW
A.S.M.E. Approved Safety Valve
Open
S/T
4 or 5-1/2
P/R
6or
7.5
OPTIONAL
2” or 3” compression disk type
sanitary drawoff valve
APPROVAL/STAMP
P/N S00117 Rev A (4/11)
MAXIMUM PRESSURE (all models):
25 PSI (173 kPa) (optional higher working pressure is available)
SHIPPING INFORMATION:
Approx. Weight:
20DS-KLT 235 lbs. (107 kg) 40DS-KLT 275 lbs. (125 kg) 60DS-KLT 309 lbs. (140 kg) 80DS-KLT 440 lbs. (200 kg)
20DS-KLS 40DS-KLS 60DS-KLS 80DS-KLS
A
20 (508) 26 (660) 30 (762) 32 (813)
B
18.5 (470) 22 (559) 25 (635) 29 (737)
C
36 (914) 36 (914) 44 (1118) 48 (1219)
D
13 (330) 17 (432) 19 (483) 20 (508)
E
20.13 (511) 23.75 (603) 25.75 (654) 26.75 (680)
F
16.13 (410) 19.25 (489) 21.25 (540) 22.25 (565)
G
23.63 (600) 23.5 (597) 29.25 (743) 31.25 (794)
H
0.75 (19) 0.75 (19) 0.75 (19) 0.75 (19)
J
0.75 (19) 0.75 (19) 0.75 (19) 0.75 (19)
K
10.63 (270) 6.5 (165) 10.25 (260) 11.25 (286)
L
21 (533) 32 (813) 31 (787) 31 (787)
M
12.31 (313) 15.31 (389) 17.31 (440) 18.75 (476)
N
13.38 (340) 15 (381) 16.75 (426) 16.75 (426)
P
9.5 (241) 12.5 (317) 12 (305) 13 (330)
R
12.5 (317) 13.5 (343) 14.5 (368) 13.75 (349)
S
15 (381) 11.5 (292) 16.5 (419) 16.5 (419)
T
14.75 (375) 11.25 (286) 16.25 (413) 16.25 (413)
U
36.25 (921) 43 (1092) 47 (1194) 49 (1245)
V
28.88 (733) 34.5 (876) 38.25 (972) 39.25 (997)
W
12.38 (314) 12.5 (318) 14.75 (375) 16.75 (426)
Loading...