Blodgett 30G-BLT User Manual

Project

Item No.

Quantity

 Model 30G-BLT (30 gallon, narrow width, gas braising pan with manual

tilt)

 Model 40G-BLT (40 gallon, narrow width, gas braising pan with manu-

altilt)

CONSTRUCTION

 304 stainless steel
 Pan is heavy duty, 10” deep, one piece welded construction
 5/8” thick stainless steel cooking surface prevents warping or distortion
 Specially designed welded heat transfer fins are heated by the gas

burner/combustion chamber. This combination delivers more uniform
heat transfer over the entire cooking surface.

 Control and tilt mechanism are mounted in stainless steel housings on

the pan body sides

 100 grit interior finish is coarse enough to retain butter, shortening or oil

during the cooking process, minimizing food sticking and burning

 A heavy-gauge, fully adjustable one-piece cover is standard with tor-

sion bar type counterbalance designed to maintain selected cover posi­tion.

 True rounded leg tubular stand design and 3” radius pan interiors make

cleaning easier.

OPERATION

 Electronic intermittent pilot ignition system
 Smooth-action, quick-tilting body with manual crank tilt mechanism,

which provides precise control during pouring of pan contents for easy
operation

 Pan tilts past vertical for easy cleaning
 Controls allow operation at a 7 degree angle to facilitate griddling.
 Thermostatically controlled for automatic shut-off when desired temper-

ature is reached or heating when temperature falls below desired set­ting

 High limit thermostat for safety
 Console mounted power switch with indicator light
 Control includes a heat indicator light and temperature control switch
 A vent in the cover top regulates condensate buildup and a rear con-

densate drip shield is located under the cover to prevent condensate
from dripping on floor when cover is opened.

STANDARD FEATURES

 Mounting bracket for either right, left or rear faucet mounting
 Etched markings (specify)

 Gallons
 Litres

 One year parts and labor warranty*

* For all international markets, contact your local distributor.

BLODGETT

44 Lakeside Avenue, Burlington, VT 05401

Toll Free: [phone] • Phone: [phone] • Fax: [phone]

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)

 Faucets

 Single pantry faucet
 Double pantry faucet

 Spray hose assembly for panty faucets

 48” (1219 mm)

 60” (1524 mm)
 Standing pilot
 Steam pan insert
 Steam pan carrier
 2” tangent drawoff (must be ordered with unit)
 Strainer for tangent drawoff valve
 Pouring lip strainer
 Flanged feet
 Casters

G-BLT

Gas Floor Model Braising Pan with Manual

Tilt

G-BLT BRAISING PAN WITH MANUAL TILT

BLODGETT

44 Lakeside Avenue, Burlington, VT 05401 Toll Free: [phone] • Phone: [phone] • Fax: [phone]

G-BLT GAS BRAISING PAN

WITH MANUAL TILT

SHORT FORM SPECIFICATIONS

Provide Blodgett model 30G-BLT, 30 gallon (114 litre) or 40G-BLT (152 litre) gas braising pan. Unit shall be stainless steel gas-heated and thermostatically controlled on a rounded tubu­lar leg stand. Heavy 5/8” thick stainless steel clad pan bottom shall have a gas burner/combustion chamber and specially-designed welded heat transfer fins. Electronic ignition is stan­dard; 30 gallon pan is 39” wide and 40 gallon pan is 48” wide both with a 10” deep pan. Smooth- action quick tilting pan body with manual crank tilt mechanism, heavy-duty fully adjustable
counter balanced cover with condensate drip shield and cover vent. NSF listed and CSA design-certified. 1/2” NPT gas connection required and standard electric spark ignition requires
115 Volt, single-phase, 60 Hertz, 5 AMP supply. Specify Natural Gas or LP Gas. Made in U S A. One year parts and labor warranty. Provide options and accessories as indicated.

Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY

NOTE: The company reserves the right to make substitutions of
components without prior notice.

Pour
Path

Full Tilt

Position

Cover Open

Access Panel

RIGHT SIDE VIEW

3

Pour Path Max.

46.0 [660]

Pour Path Min.

25.0 [635]

34.38 [873]

.75 [19] Min.

2.0 [51] Max.

1.8 [46]

70.3

[1786]

31.90
[810]

9.9

[250]

28.25
Pan I.D.

[718]

25.7 [653]
Electric

Connection

25.0 [635]
Gas

Connection

ADJUSTABLE

Finished
Floor

FEET

FRONT VIEW

C

L

C

L

10.00 [254]

Inside Pan Depth

26.28
[668]

43.3

[1100]

37

[940]

B

5.42

[138]

NOTES:

1. Dimensions are in Inches [mm]

2. Casters or flanged feet available at an extra cost.

3. Electrical Connection: 0.875" dia. [22] hole

4. Electrical power not required on optional standing pilot models.

5. Faucet bracket may be installed on left or right side.

6. Faucet may be installed on faucet bracket or on rear as shown.

TOP VIEW BRAISING PAN

Pouring

Lip

Location of Optional
2" Tangent Drawoff

11

[279]

8 [203]

D

C

L

5

Faucet

Cover

Vent

TOP VIEW

3

21.5

[546]

39.75

[1010]

5.25 [133]

Electric Connections

2.00 [51]
Gas Connections

3.00[76] Min
Rear Wall Clearance

3.4 [86]

3.4 [86]

C

A

Pan I.D.

Faucet
Optional Location
(2 Places)

Faucet

(Optional Location)

APPROVAL/STAMP

P/N S00111 Rev B (4/11)

MODEL A B C D

30G-BLT 26.25 (667) 32 (813) 38.5 (984) 8.75 (222)

40G-BLT 35.75 (908) 41.5 (1054) 48 (1226) 13.5 (343)

MAXIMUM INPUT:

30G-BLT 104,000 BTU
40G-BLT 144,000 BTU

GAS SUPPLY:

1/2" NPT connection required. A gas shut-off valve must be
installed in supply piping convenient and adjacent to unit.

Inlet Pressure:

Natural 4.5" W.C. min, 14” W.C. max
Propane 11" W.C. min, 14” W.C. max

ELECTRICAL CONNECTION:

Requires one 115 Volt, single-phase, 60 HZ, 5 AMP supply.

SHIPPING INFORMATION:

Approx. Weight:

30G-BLP 495 lbs. (225 kg)
40G-BLP 591 lbs. (268 kg)