Blizzard Lighting wiCICLE Skywire User Manual
Man, you are one cool customer. You just bought the slickest
little wireless DMX system out there, brother. We tip our cap to
you.
Scarcely bigger than the end of a
microphone cord but so, so much
cooler... the wiCICLE™ Wire-
less DMX system. 2.4Ghz, 512
autoselecting channels, shiny,
and works like a dream.
If this were a playground, it
would be the fi rst kid picked for
kickball, and now it’s yours. In a
word... Booyah. There, we said
it. Now read these instructions
quick so you can start playin’!
· 7 Channel Groups with autoselecting channels (512 Channels total)
· 2.4Ghz ISM Band Operation for dropout-free performance
· Max. Operating Range: 300FT line-of-sight
· Max. Transmitter Power: 20dBm
· Receiver Sensitivity: -94 dBm
· Power Requirements: 5VDC, 1A.
· Signal Connector: 3-pin “XLR” Male/Female connector
· Warrant: Sweet Cherry Pie.
· Warranty: 2 Years (See Flipside for Details.)
PRODUCT FEATURES / SPECS
Man, you are one cool customer. You just bought the slickest
little wireless DMX system out there, brother. We tip our cap to
you.
Scarcely bigger than the end of a
microphone cord but so, so much
cooler... the wiCICLE™ Wire-
less DMX system. 2.4Ghz, 512
autoselecting channels, shiny,
and works like a dream.
If this were a playground, it
would be the fi rst kid picked for
kickball, and now it’s yours. In a
word... Booyah. There, we said
it. Now read these instructions
quick so you can start playin’!
· 7 Channel Groups with autoselecting channels (512 Channels total)
· 2.4Ghz ISM Band Operation for dropout-free performance
· Max. Operating Range: 300FT line-of-sight
· Max. Transmitter Power: 20dBm
· Receiver Sensitivity: -94 dBm
· Power Requirements: 5VDC, 1A.
· Signal Connector: 3-pin “XLR” Male/Female connector
· Warrant: Sweet Cherry Pie.
· Warranty: 2 Years (See Flipside for Details.)
PRODUCT FEATURES / SPECS
HOW TO WORK IT:
1. Power on the wiCICLE™ Transmitter and Receiver.
2. Press the button on the Transmitter to select the operating channel group.
The 7-Color Status LED will change color to indicate the current channel
group:
· GROUP 1: RED
· GROUP 2: GREEN
· GROUP 3: YELLOW
· GROUP 4: BLUE
· GROUP 5: VIOLET
· GROUP 6: CYAN
· GROUP 7: WHITE
3. Follow the same procedure on the Receiver to select the channel group.
4. Once both the transmitter and receiver(s) are both set to the same channel group, connect the transmitter to the DMX controller or the DMX out
of a fi xture on your DMX chain. Connect the receiver to the fi xture you
wish to control.
5. Once a DMX signal is provided to the transmitter, the status LED will
blink red slowly until communication is established with the receiver. The
status LED on the receiver(s) will fl ash green slowly until communication
is established.
6. Once the clearest channel is auto-selected, both the transmitter and
receiver status LEDs will blink quickly.
7. That’s It!
CAUTION!
· There are no user servicable parts inside. Do not open the unit. Doing so
will void your warranty and subject you to all sorts of bad karma.
· This unit is designed for indoor use only. Keep it dry and out of the sun.
(Like a chocolate bar.)
· Operating environment: 0-104 degrees F. <90% RH.
· If you have a problem, just call or email! We’re here to help!
THANK YOU FOR YOUR PURCHASE, WE REALLY APPRECIATE IT!
BLIZZARD LIGHTING, LLC. · PO BOX 1874 · BROOKFIELD, WI 53008 USA
-- THE TEAM @ BLIZZARD LIGHTING
HAVE A PROBLEM? NEED HELP? WANNA LEARN MORE?
CALL 414.979.5781/ WEBSITE: WWW.BLIZZARDLIGHTING.COM
EMAIL: SUPPORT@BLIZZARDLIGHTING.COM
HOW TO WORK IT:
1. Power on the wiCICLE™ Transmitter and Receiver.
2. Press the button on the Transmitter to select the operating channel group.
The 7-Color Status LED will change color to indicate the current channel
group:
· GROUP 1: RED
· GROUP 2: GREEN
· GROUP 3: YELLOW
· GROUP 4: BLUE
· GROUP 5: VIOLET
· GROUP 6: CYAN
· GROUP 7: WHITE
3. Follow the same procedure on the Receiver to select the channel group.
4. Once both the transmitter and receiver(s) are both set to the same channel group, connect the transmitter to the DMX controller or the DMX out
of a fi xture on your DMX chain. Connect the receiver to the fi xture you
wish to control.
5. Once a DMX signal is provided to the transmitter, the status LED will
blink red slowly until communication is established with the receiver. The
status LED on the receiver(s) will fl ash green slowly until communication
is established.
6. Once the clearest channel is auto-selected, both the transmitter and
receiver status LEDs will blink quickly.
7. That’s It!
CAUTION!
· There are no user servicable parts inside. Do not open the unit. Doing so
will void your warranty and subject you to all sorts of bad karma.
· This unit is designed for indoor use only. Keep it dry and out of the sun.
(Like a chocolate bar.)
· Operating environment: 0-104 degrees F. <90% RH.
· If you have a problem, just call or email! We’re here to help!
THANK YOU FOR YOUR PURCHASE, WE REALLY APPRECIATE IT!
BLIZZARD LIGHTING, LLC. · PO BOX 1874 · BROOKFIELD, WI 53008 USA
-- THE TEAM @ BLIZZARD LIGHTING
HAVE A PROBLEM? NEED HELP? WANNA LEARN MORE?
CALL 414.979.5781/ WEBSITE: WWW.BLIZZARDLIGHTING.COM
EMAIL: SUPPORT@BLIZZARDLIGHTING.COM
PRODUCT LIMITED WARRANTY
We hope you NEVER have a problem with your products, and we work very,
very hard to make sure each of our products is up to the challenges of life
as “an entertainer.” With that said, being an entertainer is hard work, and
sometimes even with our best laid plans, something goes awry. We are
proud to offer an industry-leading warranty program for all of our products.
We stand behind them and will do whatever we can to keep your products
working for you for a lifetime!
--Blizzard Lighting, LLC hereby warrants that its products shall be free of
manufacturing defects in material and workmanship for a prescribed period
from the date of purchase (see specifi c warranty period below). This war-
ranty shall be valid only if the product is purchased within the United States
of America, including possessions and territories. This warranty shall be valid
only if the product is purchased from an authorized dealer appointed by Blizzard Lighting, LLC. It is the owner’s responsibility to establish the date and
place of purchase by acceptable evidence.
For warranty service you must obtain a Return Authorization number (RA#)
before sending back the product. Contact Blizzard Lighting, LLC’s Service
Department at support@blizzardlighting.com. Send the product only to
the Blizzard Lighting, LLC factory. All shipping charges must be prepaid. If
the requested repairs or service (including parts replacement) are within
the terms of this warranty, Blizzard Lighting, LLC will pay return shipping
charges only to a designated point within the United States. If the entire
instrument is sent, it must be shipped in its original package. No accessories
should be shipped with the product. If any accessories are shipped with the
product, Blizzard Lighting, LLC shall have no liability whatsoever for loss of
or damage to any such accessories, nor for the safe return thereof.
PRODUCT LIMITED WARRANTY
We hope you NEVER have a problem with your products, and we work very,
very hard to make sure each of our products is up to the challenges of life
as “an entertainer.” With that said, being an entertainer is hard work, and
sometimes even with our best laid plans, something goes awry. We are
proud to offer an industry-leading warranty program for all of our products.
We stand behind them and will do whatever we can to keep your products
working for you for a lifetime!
---
Blizzard Lighting, LLC hereby warrants that its products shall be free of
manufacturing defects in material and workmanship for a prescribed period
from the date of purchase (see specifi c warranty period below). This war-
ranty shall be valid only if the product is purchased within the United States
of America, including possessions and territories. This warranty shall be valid
only if the product is purchased from an authorized dealer appointed by Blizzard Lighting, LLC. It is the owner’s responsibility to establish the date and
place of purchase by acceptable evidence.
For warranty service you must obtain a Return Authorization number (RA#)
before sending back the product. Contact Blizzard Lighting, LLC’s Service
Department at support@blizzardlighting.com. Send the product only to
the Blizzard Lighting, LLC factory. All shipping charges must be prepaid. If
the requested repairs or service (including parts replacement) are within
the terms of this warranty, Blizzard Lighting, LLC will pay return shipping
charges only to a designated point within the United States. If the entire
instrument is sent, it must be shipped in its original package. No accessories
should be shipped with the product. If any accessories are shipped with the
product, Blizzard Lighting, LLC shall have no liability whatsoever for loss of
or damage to any such accessories, nor for the safe return thereof.
...CONTINUED BELOW...
This warranty is void if the serial number has been altered or removed; if the
product is modifi ed in any manner which Blizzard Lighting, LLC concludes,
after inspection, affects the reliability of the product; if the product has been
repaired or serviced by anyone other than the Blizzard Lighting, LLC factory
unless prior written authorization was issued to purchaser by Blizzard Lighting, LLC; if the product is damaged because not properly maintained as set
forth in the instruction manual.
This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specifi ed above,
Blizzard Lighting, LLC will replace defective parts at its expense with new
or refurbished parts, and will absorb all expenses for warranty service and
repair labor by reason of defects in material or workmanship. The sole
responsibility of Blizzard Lighting, LLC under this warranty shall be limited to
the repair of the product, or replacement thereof, including parts, at the sole
discretion of Blizzard Lighting.
Blizzard Lighting, LLC reserves the right to make changes in design and/
or improvements upon its products without any obligation to include these
changes in any products theretofore manufactured.
No warranty, whether expressed or implied, is given or made with respect to
any accessory supplied with products described above. Except to the extent
prohibited by applicable law, all implied warranties made by Blizzard Lighting, LLC in connection with this product, including warranties of merchantability or fi tness, are limited in duration to the warranty period set forth
above. And no warranties, whether expressed or implied, including warranties of merchantability or fi tness, shall apply to this product after said period
has expired. The consumer’s and/or Dealer’s sole remedy shall be such
repair or replacement as is expressly provided above; and under no circumstances shall Blizzard Lighting, LLC be liable for any loss or damage, direct
or consequential, arising out of the use of, or inability to use, this product.
This warranty is the only written warranty applicable to Blizzard Lighting
Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
LIMITED WARRANTY PERIODS:
All LED Products: 2 years (does not include damage to LEDs caused
by mishandling)
All Controller Products: 2 years
All Fog/Atmospheric Products (Non-DMX): 90 days, (DMX): 2 years
Lasers: 2 years
Other Products not listed here: 90 days
...CONTINUED BELOW...
This warranty is void if the serial number has been altered or removed; if the
product is modifi ed in any manner which Blizzard Lighting, LLC concludes,
after inspection, affects the reliability of the product; if the product has been
repaired or serviced by anyone other than the Blizzard Lighting, LLC factory
unless prior written authorization was issued to purchaser by Blizzard Lighting, LLC; if the product is damaged because not properly maintained as set
forth in the instruction manual.
This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the period specifi ed above,
Blizzard Lighting, LLC will replace defective parts at its expense with new
or refurbished parts, and will absorb all expenses for warranty service and
repair labor by reason of defects in material or workmanship. The sole
responsibility of Blizzard Lighting, LLC under this warranty shall be limited to
the repair of the product, or replacement thereof, including parts, at the sole
discretion of Blizzard Lighting.
Blizzard Lighting, LLC reserves the right to make changes in design and/
or improvements upon its products without any obligation to include these
changes in any products theretofore manufactured.
No warranty, whether expressed or implied, is given or made with respect to
any accessory supplied with products described above. Except to the extent
prohibited by applicable law, all implied warranties made by Blizzard Lighting, LLC in connection with this product, including warranties of merchantability or fi tness, are limited in duration to the warranty period set forth
above. And no warranties, whether expressed or implied, including warranties of merchantability or fi tness, shall apply to this product after said period
has expired. The consumer’s and/or Dealer’s sole remedy shall be such
repair or replacement as is expressly provided above; and under no circumstances shall Blizzard Lighting, LLC be liable for any loss or damage, direct
or consequential, arising out of the use of, or inability to use, this product.
This warranty is the only written warranty applicable to Blizzard Lighting
Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
LIMITED WARRANTY PERIODS:
All LED Products: 2 years (does not include damage to LEDs caused
by mishandling)
All Controller Products: 2 years
All Fog/Atmospheric Products (Non-DMX): 90 days, (DMX): 2 years
Lasers: 2 years
Other Products not listed here: 90 days
Loading...