Blizzard Lighting, LLC
www.blizzardlighting.com
Waukesha, WI USA
Copyright (c) 2016
Page 2
ProPar™ Z19 RGBW Manual Rev. A © 2016 Blizzard Lighting, LLC
TABLE OF CONTENTS
ProPar™ Z19 RGBW LED Par Fixture 1
1. Getting Started 3
What’s In The Box? 3
Optional Accessories (sold separately) 3
Getting It Out Of The Box 3
Powering Up! 3
Getting A Hold Of Us 3
Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4
2. Meet The ProPar™ Z19 5
Main Features 5
Additional Features 5
DMX Quick Reference 5
The ProPar™ Z19 Pin-up Picture 6
3. Setup 7
Fuse Replacement 7
Connecting A Bunch Of ProPar™ Z19 Fixtures 7
Data/DMX Cables 7
Cable Connectors 8
3-Pin??? 5-Pin??? Huh? 8
Take It To The Next Level: Setting up DMX Control 8
Fixture Linking (Master/Slave Mode) 9
Mounting/Rigging 9
4. Operating Adjustments 10
The Control Panel 10
Control Panel Menu Structure 11
DMX Mode 12
Select The Channel Mode 12
Select The DMX Starting Address 12
Slave Mode 12
Auto, Stand-Alone, Sound Active Modes 12
Auto Mode 12
Sound Active Mode 12
Zoom Adjustment 12
Enable/Disable Manual Adjustments 12
Manual Adjustments 12
DMX Channel Values In-Depth 13
Troubleshooting 14
5. Appendix 15
A Quick DMX Lesson 15
Keeping Your ProPar™ Z19 As Good As New 16
Returns (Gasp!) 16
Shipping Issues 16
Tech Specs 17
Dimensional Drawings 18
Page 3
ProPar™ Z19 RGBW Manual Rev. A © 2016 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x ProPar™ Z19 RGBW LED Par Fixture
• An Ever-So-Handy Power Cord
• This Lovely User Manual
Optional Accessories (sold separately)
The following accessories are available for this xture. But the lone wolves that they are, they must
be purchased separately. Contact your authorized Blizzard Lighting dealer for pricing!
• BARNDOOR PROPAR Z19 (B): Barndoor attachment (Black)
• BARNDOOR PROPAR Z19 (W): Barndoor attachment (White)
Getting It Out Of The Box
Congratulations on purchasing the totally awesome ProPar™ Z19 LED par xture. It’s so cool your
friends are going to be like, BRUH, and then you’ll be like yeah BRUH! Now that you’ve got your
ProPar™ Z19 (or hopefully, Z19s!), you should carefully unpack the box and check the contents to
ensure that all parts are present and in good condition. If anything looks as if it has been damaged
in transit, notify the shipper immediately and keep the packing material for inspection. Again,
please save the carton and all packing materials. If a xture must be returned to the factory, it is
important that the xture be returned in the original factory box and packing.
Powering Up!
All xtures must be powered directly off a switched circuit and cannot be run off a rheostat
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used
solely for a 0% to 100% switch.
AC Voltage Switch - Not all xtures have a voltage select switch, so please verify that the xture
you receive is suitable for your local power supply. See the label on the xture or refer to the
xture’s specications chart for more information. A xture’s listed current rating is its average
current draw under normal conditions. Check the xture or device carefully to make sure that if a
voltage selection switch exists that it is set to the correct line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the line voltage
applied. Damage to your xture may result if the line voltage applied does not match the
voltage indicated on the voltage selector switch. All xtures must be connected to circuits
with a suitable Ground (Earthing).
Getting A Hold Of Us
If something happens goes wrong, please visit www.blizzardlighting.com/support and
open a support ticket. We’ll be happy to help, honest.
Blizzard Lighting
N24 W23750 Watertown Rd. Suite B
Waukesha, WI 53188 USA
www.blizzardlighting.com
Disclaimer: The information and specications contained in this document are subject to change
without notice. Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions
that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing
document or to create a new document to correct any errors or omissions at any time. You can
download the latest version of this document from www.blizzardlighting.com.
Author: Date: Last Edited: Date:
J. Thomas 12/21/2015 J. Thomas 12/23/2015
Page 4
ProPar™ Z19 RGBW Manual Rev. A © 2016 Blizzard Lighting, LLC
SAFETY INSTRUCTIONS
• Please keep this User Guide for future use. If you sell the unit to someone
else, be sure that they also receive this User Guide.
• ALWAYS make sure that you are connecting to the proper voltage, and that
the line voltage you are connecting to is not higher than that stated on the de-
cal or rear panel of the xture.
• This product is intended for indoor use only.
• To prevent risk of re or shock, do not expose xture to rain or moisture.
• Make sure there are no ammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least
20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are
blocked.
• ALWAYS disconnect from the power source before servicing or replacing fuse
and be sure to replace with same fuse size and type.
• ALWAYS secure xture using a safety chain. NEVER carry the xture by its
cord. Use its carrying handles.
• DO NOT operate at ambient temperatures higher than 104°F (40°C).
• In the event of a serious operating problem, stop using the unit immediately.
NEVER try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.
• NEVER connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
Caution! There are no user serviceable parts inside the unit. Do not
open the housing or attempt any repairs yourself. In the unlikely event
your unit may require service, please contact Blizzard Lighting at www.
blizzardlighting.com/support.
Page 5
ProPar™ Z19 RGBW Manual Rev. A © 2016 Blizzard Lighting, LLC
2. MEET THE PROPAR™ Z19 LED PAR CAN
MAIN FEATURES
• RGBW color mixing via 19x 15W 4-in-1 OSRAM LEDs
• 5°-60° degree zoomable beam angle
• Variable electronic dimming & strobe
• Built-in color & chase + zoom macros via DMX
• Built-in automated programs via master/slave
• Built-in sound active programs
• RGBW color mixing ability in standalone mode
• 5/7 or 9-channel DMX control modes
ADDITIONAL FEATURES
• Easy-to-use 4-button LED control panel menu display
• Dual mounting brackets for positioning exibility
• Rugged and well-built (It hits the gym regularly)
• 3-pin male & female DMX input/output
• PowerCon™ compatible AC power In/Out connectors
DMX Quick Reference: 9/7-Channel Mode
Channel 9-Channel 7-Channel
1 Dimmer Dimmer
2 Red Intensity Red Intensity
3 Green Intensity Green Intensity
4 Blue Intensity Blue Intensity
5 White Intensity White Intensity
6 Strobe Strobe
7 Zoom Zoom
8 Built-in Programs ---
9 Program Speed ---
DMX Quick Reference: 5-Channel Mode
Channel 5-Channel
1 Red Intensity
2 Green Intensity
3 Blue Intensity
4 White Intensity
5 Zoom
Page 6
ProPar™ Z19 RGBW Manual Rev. A © 2016 Blizzard Lighting, LLC
Figure 1: The ProPar™ Z19 Pin-Up Picture
19x 15W OSRAM
4-in-1 RGBW LEDs
Dual Mounting
Brackets with
Locking Knobs
Figure 2: The Rear Connections
DMX Input
DMX Output
Control
Panel
Menu
Buttons
Durable Black or
White Housing with
Optional Barndoors
(sold separately)
Power Out
Power In
LED Display
Fuse Holder
Loading...