Blizzard Lighting LED ProPar User Manual
TABLE OF CONTENTS
ProPar™ LED 136/336 1
1. Getting Started 3
What’s In The Box? 3
Getting It Out Of The Box 3
Powering Up! 3
Getting A Hold Of Us 3
Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4
2. Meet The ProPar™ LED 136/336 5
Features 5
DMX Quick Reference 5
The ProPar
3. Setup 7
Fuse Replacement 7
Connecting A Bunch Of ProPar™ LED 136/336’s 7
Data/DMX Cables 7
Cable Connectors 8
3-Pin??? 5-Pin??? Huh? 8
Take It To The Next Level: Setting up DMX Control 8
Fixture Linking (Master/Slave Mode) 9
Mounting/Rigging 9
4. Operating Adjustments 10
Navigating The Control Panel 10
Control Panel Menu Structure 11
DMX Mode 12
Master/Slave Mode 12
Sound Active Mode 12
Standalone (Program) Mode 12
Manual (Color Preset) Mode 12
DMX Channel Values In-Depth 13
Troubleshooting 14
5. Appendix 15
A Quick DMX Lesson 15
Keeping Your ProPar™ LED As Good As New 16
Returns (Gasp!) 16
Shipping Issues 16
Tech Specs 17
™ Pin-up Picture 6
Blizzard Lighting, LLC
www.blizzardlighting.com
Brookfi eld, WI USA
Copyright (c) 2010
ProPar LED Manual Rev. B Copyright (c) 2010 Blizzard Lighting, LLC
Page 2
1. GETTING STARTED
What’s In The Box?
• 1 x ProPar™ Professional LED PAR Fixture
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on purchasing one of the brightest, best-built PAR
fi xtures anywhere! Now that you’ve got your ProPar™ (or hopefully,
ProPars!), you should carefully unpack the box and check the contents
to ensure that all parts are present and in good condition. If anything
looks as if it has been damaged in transit, notify the shipper immediately and keep the packing material for inspection. Again, please save
the carton and all packing materials. If a fi xture must be returned to
the factory, it is important that the fi xture be returned in the original
factory box and packing.
SAFETY INSTRUCTIONS
• Please keep this User Guide for future use. If you sell the unit to someone
else, be sure that they also receive this User Guide.
• ALWAYS make sure that you are connecting to the proper voltage, and that
the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fi xture.
• This product is intended for indoor use only.
• To prevent risk of fi re or shock, do not expose fi xture to rain or moisture.
Powering Up!
All fi xtures must be powered directly off a switched circuit and cannot
be run off a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel is used solely for a 0% to
100% switch.
AC Voltage Switch - Not all fi xtures have a voltage select switch, so
please verify that the fi xture you receive is suitable for your local pow-
er supply. See the label on the fi xture or refer to the fi xture’s specifi -
cations chart for more information. A fi xture’s listed current rating is
its average current draw under normal conditions. Check the fi xture or
device carefully to make sure that if a voltage selection switch exists
that it is set to the correct line voltage you will use.
Warning! Verify that the voltage select switch on your unit
matches the line voltage applied. Damage to your fi xture may
result if the line voltage applied does not match the voltage
indicated on the voltage selector switch. All fi xtures must be
connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, just give us a call or send an email.
We’ll be happy to help, honest.
Blizzard Lighting
2705 Brookview Ct., Brookfi eld, WI 53005 USA
support@blizzardlighting.com
www.blizzardlighting.com
414-979-5781
• Make sure there are no fl ammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least
20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are
blocked.
• ALWAYS disconnect from the power source before servicing or replacing fuse
and be sure to replace with same fuse size and type.
• ALWAYS secure fi xture using a safety chain. NEVER carry the fi xture by its
cord. Use its carrying handles.
• DO NOT operate at ambient temperatures higher than 104°F (40°C).
• In the event of a serious operating problem, stop using the unit immediately.
NEVER try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.
• NEVER connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
Caution! There are no user serviceable parts inside the unit. Do not
open the housing or attempt any repairs yourself. In the unlikely event
your unit may require service, please contact Blizzard Lighting at support@blizzardlighting.com.
ProPar LED Manual Rev. B Copyright (c) 2010 Blizzard Lighting, LLC
Page 3
ProPar LED Manual Rev. B Copyright (c) 2010 Blizzard Lighting, LLC
Page 4
2. MEET THE ProPar™ LED 136/336 PAR
CONTROL FEATURES
• RGB color mixing via 36 high power 1W or 3W Red/Green/Blue LEDs
• Variable electronic strobe
• Variable electronic dimmer
• Built-in color & chase macros via DMX
• Built-in automated programs via master/slave
• RGB color mixing ability in standalone mode
ADDITIONAL FEATURES
• Rugged and well-built (It hits the gym regularly)
• Lux: 14,500 @ 1m (ProPar 336), 12,100 @ 1m (ProPar 136)
• Light source: 36x 3 watt LEDs (ProPar 336) or 36x 1 watt LEDs
(ProPar 136). 12 each Red/Green/Blue
• Internal Fan Cooling
DMX Quick Reference
Channel What It Does
1 Dimmer
2 Red Intensity
3 Green Intensity
4 Blue Intensity
5 Strobe
6 Built-in Programs
Figure 1: The ProPar™ Pin-Up Picture
High Power
LEDs
Integral Gel
Frame
Figure 2: The Rear Connections
Mounting Yoke &
Adjustment/Locking Knobs
Cast Aluminum
Enclosure
ProPar LED Manual Rev. B Copyright (c) 2010 Blizzard Lighting, LLC
Page 5
DMX In DMX Out
Grounding
Screw
LED Control Panel
AC Power
ProPar LED Manual Rev. B Copyright (c) 2010 Blizzard Lighting, LLC
Page 6
Loading...