Blizzard HB1SS, HB2SS, LB1SS, LB2SS Manual Of Instructions For Use And Installation

UPRIGHT REFRIGERATOR

MANUAL OF INSTRUCTIONS FOR USE AND

INSTALLATION

INDEX

1. Introduction

2. Manufacturers Retained Rights and Responsibilities

3. Transportation & Storage

4. Commissioning

4.1 Positioning

4.2 Initial Hygiene

4.3 Connection to Electrical Supply

4.4 Connection to Drains

5. Technical Characteristics

5.1 Electrical Consumption

5.2 Noise and Vibration

5.3 Possible Applications

6. Usage

6.1.1 Switching On/Off

6.1.2 Temperature Readout

6.1.3 Setting Temperature

6.1.4 Alarm Codes

6.2 Storage of Foodstuffs

6.3 Defrosting

6.3.1 Defrost Timer

6.3.2 Manual Defrosting

7. Maintenance

7.1 Periodic Cleaning

7.2 Cleaning of Condenser

7.3 Cabinet Not in Use

8. Troubleshooting

8.1 If the cabinet is not operating

8.2 If temperature is not being achieved

8.3 If the cabinet leaks water

8.4 Excessive Noise

9. Spares/Repairs

10. Disposal

1. Introduction

This equipment has been produced to match the internal and external
specifications required by our clients. It has been thoroughly tested and
checked before despatch to ensure it meets the highest European
standards of quality and safety.

To ensure optimum performance from your equipment, please ensure to
follow the instructions in this manual with regards to operation and
maintenance, failure to do so may result in invalidating the warranty. By
following the enclosed instructions, you will ensure a long and productive
life from your machine.

2. Manufacturers Retained Rights and Responsibilities

It is forbidden reproduce in whole or in part, any of these instructions
without the express permission of the manufacturer.

The manufacturer does not accept liability to third parties as the result of:

• Failure to observe the warnings and instructions in this text

• Use of equipment for any purpose other than specified

• Misuse by untrained personnel

• Usage not conforming to local regulations

• Unauthorised modifications and/or repairs carried out by

unsuitable persons.

• Use of non-original or recommended parts or accessories

• The manufacturer reserves the right to introduce any

modification deemed necessary without notice.

3. Transportation

The equipment is wrapped in absorbent material and contained and fixed
within a fixed pallet and stiff cardboard crate. Weights are listed as
follows:

MODEL NET Wt.

(Kg)

Packing Wt.

(Kg)

HB1SS 134 148

HB2SS 198 213

LB1SS 138 155

LB2SS 208 225